Reviews Hollow Set Mounting Bolt

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOVOT 77PCS Wall Anchor Setting Tool Heavy Duty Hollow Wall Anchor Tool with 5 Sizes Molly Bolts Hollow Drive Wall Anchor Screw Kit (M4 M5 M6)

  • ...can be more comfortable with non-slip rubber material handle, and suitable for different types of bolts, heavy duty and reliable..
  • 【Widely Applications】: The setting tool set can be used as a fixed connection on hollow walls, plasterboard, and wood panels, suitable for mounting curtains, hanging pictures, and fixing shelves. The structure of the bolt is stable, heavy duty and not easy to break..
  • 【High-Quality】: The material of the wall anchor setting tool is  zinc plated carbon steel, which is water-resistant and highly hard, not easy to rust and deform by long term use..
  • 【Package Content】: The kit contains 1 metal hollow wall anchor tool, 76pcs, 5 seizes carbon steel molly bolts: 20pcs×M4×32mm, 20pcs×M4×38mm, 12pcs×M5×52mm, 12pcs×M6×52mm, 12pcs×M6×65mm..
  • 【Installation】: Equipped with anchors setting tool, easy to use and save time. Sufficient quantity and rich size for interior decoration use, plastic handheld work box, easy to carry and store..
Check Stock

Aoneky Hollow Basketball Rim Replacement, Standard 18\ Size Basketball Goal Hoop with Net

  • Universal designed mounting bolt pattern compatible with 5x5in, 5x4.5in, 5x4in, 5x3.5in, 5x3in, 4x3in, please measure your backboard first and ensure fit.
  • Standard size 18" diameter basketball rim, Weather-proof nylon net included.
  • Simple replacement rim for kids play, not for dunk.
  • Rim frame constructed of 18mm hollow steel.
  • Orange powder-coated finished, rust-proof.
Check Stock

Toggle Anchor Bolts, New Design Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x110mm, Pack of 4

  • ...t to automate the production process to ensure product processing accuracy, so the product appearance is exquisite, perfect workmanship..
  • ❤ GREAT VALUE --- Great toggle bolts at a much better price than big box stores. A must have for any handyman/woman / homeowner 's tool box. Convenient re-sealable plastic case. Hollow wall drive anchors - 1/8 in SD 39mm hollow wall drive anchors, 1/8 in SD 46mm hollow wall drive anchors,1/8 in SLD 59mm hollow wall drive anchors. You could choose one or more according to your different needs..
Check Stock

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
  • This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
  • EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Forster Products 8-Piece Gunsmith Screwdriver Set, Hollow Ground Tips with Square Faces, Single Piece Construction, with a Durable Storage Pouch

  • 8 PIECE SET: This set of eight drivers includes screwdrivers #1, 2, 3, 4, 5, 14, 15, & 16, bundled together as a convenient set in a handy, durable storage pouch that you may hang near your work area for easy access..
  • DESIGNED FOR GUNSMITHING: Designed specifically for the mounting of scope sights and other common gunsmithing requirements, these Forster Gunsmith screwdrivers will be properly dimensioned to handle those unique tasks. Nothing is more frustrating than a bruised scope mount, a distorted screw, or the white metal showing through the finish of an expensive scope that has been subjected to a damaging mounting job..
  • HOLLOW GROUND TIPS: Hollow ground blades with square faces accurately fit screw slot for optimal torque, will not damage screw or chamfer work. Forster Products screwdrivers are not the double wedge type, swedged on a punch press..
  • SINGLE PIECE CONSTRUCTION: Each screwdriver is an individual unit, no sloppy inserts to slip in and out..
  • MANUFACTURED IN THE USA: U.S.-manufactured, hollow ground screwdrivers are versatile enough to be adaptable to many other uses, as well. All Forster screwdrivers are manufactured using the highest quality hardened steel..
Check Stock

Ibanez Artcore Series AS73G Semi-Hollowbody Electric Guitar Flat Black

  • Body Body shape: Double cutaway Body type: Semi-hollow or chambered body Body material: Solid wood Top wood: Maple Body wood: Maple Body finish: Satin Orientation: Right handed Neck Neck shape: Speed neck Neck wood: Mahogany Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Satin Fretboard Material: Bound Rosewood Radius: Compound Fret size: Medium Stainless003cbr.
  • "As evidenced by its long-standing association with such giants of jazz guitar as George Benson, Pat Metheny, and John Scofield, Ibanez has been a constant pioneer in the world of hollow-body guitar building for more than three decades.
  • Part of that legacy is owed to the Artcore collection, which has succeeded in smashing any and all preconceptions in its wake as to what a great hollow or semi-hollow ought to be.
  • The Artcore formula builds on equal parts luthiery know-how, daring design, and a passion for warm, full-bodied tone.
  • The AS73G features a select-grade Maple semi-hollow body, a set-in Mahogany neck and Rosewood fretboard contribute to the warm-sounding characteristics of the AS73G.
Check Stock