Reviews Hole Hammer

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • ..., coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • WIDE APPLICATION: This concrete hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone). It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier. You can order worry free and start using this hole saw kit for your home improvement projects right away..
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...aws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

WUTA Leather Carving Hammer Professional Leather Mallet Hammer Leatherworking Maul Nylon Head Hammer for Handmade DIY Leather Tools

  • Leather Mallet Materials: Made of solid wood handle+ high-density nylon hammer+ stainless steel circle. Professional leather carving hammer for leather industry enthusiasts..
  • Mallet Size: Handle Wood Length: 5.51 inch (14 cm), Hammer Nylon length: 2.36 inch (5.99 cm), hammer diameter: 1.96 inch (4.98 cm). Approx.1 Lb/460g..
  • The nylon hammer is ergonomically designed and proportional to the artist/craftsman's best use. Perfect for professionals and hobbyists use for leather stamps, prong diamond chisel, hole punch, etc..
  • Polished to make it smooth and comfortable to touch. It will reduce shock, anti-slip, anti-sweat, etc., reduce fatigue when used for a long time..
  • Worry-free purchase: Nylon hammer is solid enough to use. If you are not satisfied, you can contact us to return anytime..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...aws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

  • The OTC blind hole bearing puller set is for those jobs requiring an internal pull.
  • set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications.
  • Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer.
  • Includes a 2-1/2 pound slide hammer with a T-handle.
  • Blow-molded plastic storage case keeps set contents organized and protected from loss.
Check Stock

WORKPRO 5-Piece Hammer Set, Forged & Polished Steel Head, Fiberglass Handle, 32oz Rubber Mallet | 16oz Claw Hammer | 3lb Sledge Hammer | 16oz Ball Peen Hammer | 22oz Double-Faced Mallet

  • Professional Hammer Set: WORKPRO 5-Piece hammer set including a 3lb sledge hammer black paint, a 16oz Ball Peen Hammer, a 16oz Claw Hammer, a 32oz Rubber Mallet and a 22oz Double-Faced Mallet. Different types of hammers fit perfectly for delicate jobs, which can also improve your work efficiency..
  • Fiberglass Handle: The fiberglass for the ergonomic handle reduces vibration and shock transfer, which can reduce fatigue, increases leverage and allow you to work for long periods of time. The safe non-slip strong grip helps you to firmly and comfortably hold the handle. The end of the handle has a storage hole for hanging storage to save space..
  • Forged & Polished Steel Head: The heads of the claw hammer, ball peen hammer and sledge hammer are made of high-quality steel, which is durable, resistant to corrosion and easy to clean. The Claw hammer can be used to pull out nails. The rounded ball end of the ball peen hammer is for shaping sheet metal, striking chisels and rivets. The black coating of the sledge hammer enhances rust protection..
  • Rubber Head & Replaceable Head: Rubber mallet and double-faced soft mallet ar....
Check Stock

Sabre Tools 5/8\ SDS Plus Ground Rod Driver Bit for use with Rotary Hammer (5/8\ Ground Rod Driver)

  • 3/8" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

DIUDUS Leather Hammer Craft Leather Carving Nylon Hammer Leather Mallet Stamping Tool Leather Maul Comfortable Wooden Handle DIY Leather Work Hammer for Handmade Project (Green/Water-Rippled)

  • 【Professional Leather Hammer】As a tool for leather carving craft, it can hit different figures on leather projects and is used with leather stamps, prong diamond chisel, and hole punch for a long time..
  • 【Hammer Size Detail】The hammer head is 1.97 inches (5cm) wide and the overall length is 7.87 inches (20cm). The weight is in a suitable range of 1.0 LB, which saves effort and protects the wrist..
  • 【High Standard Production】Our hammer head is made of stainless steel nylon, it is non-slip sturdy, abrasion-resistant, and durable. The nylon head can produce elasticity, making it easier for stamping..
  • 【Ergonomic Grip Design】The smooth green water ripple wooden handle has a good grip, non-slip and sweat-resistant. Long-term use will not feel tiring. It is designed according to ergonomics to make the hammer easy to hold..
  • 【Valuable Packaging Hammer】You will get a leather engraving hammer beautifully packaged. Easy to carry, and you can use it anytime. The wooden handle nylon hammer has low impact and is more suitable for leather DIY projects..
Check Stock