Reviews Hitch Receiver Bumper Bolts

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on

  • Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using.
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included.
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper.
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure.
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
Check Stock

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

Rv Bumper Hitch Receiver 2 Inch, Bolt on Receiver Hitch, RV Bumper Hook Adapter Apply to 4 Inch to 4.5 Inch Beams for Bike Racks, Cargo Carriers Camper-On

  • This 2 inch RV Bumper Hitch Receiver can be fitted to the rear bumper of a 4" car and it has a 2" standard receiver for bumper extension. NOT for Towing..
  • 2'' RV Bumper Hitch Receiver is easy to install: You just need to fix the nut to the 4'' square rear bumper and tighten it with a screwdriver..
  • Excellent material: Bolt on receiver hitch made of high quality metal, it can withstand up to 200 pounds and carry 2 regular bikes, ready for your field trips..
  • The RV bumper hitch is extremely robust and durable, with a surface coating that remains smooth and free from embroidery. It is made from high quality metal, it is built to last..
  • If you have any questions, please feel free to contact us and we will respond within 24 hours..
Check Stock

Towever 83801 RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper

  • This travel trailer RV accessories fits 4″- 4.5″ square bumpers (can be mounted upside or down bumper beams ).
  • For hitch mount 2″ shank of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity.
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL.
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper.
Check Stock

MaxxHaul 50173 Hitch 2" x 2" Receiver Adapter for RV Bumper

  • MaxxHaul Hitch Receiver Adapter instantly provide a 2" x 2" receiver for RV bumper and has a 200-lb tongue weight capacity.
  • This hitch receiver is designed for RV bumpers with 4"- 4. 5" square bumpers.
  • Universal Design - Is compatible and accept hitch mount accessories with 2" shank such as bike racks, RV tire carriers, hitch step and other accessories..
  • Durable & Rust Resistant - Made from heavy duty all steel construction and weighs less than 10 lbs. with rugged powder coat finish to resist rust and corrossion.
  • Easy Installation - quickly installs on your RV bumper.
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver with Hitch Pin & Hitch Cover

  • Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go..
  • Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time..
  • Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation..
  • 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to ....
Check Stock

TangMiGe Bolt on Tractor Bucket 2 inch Receiver, 2" Towing Hitch Receiver, 5/8” Hitch Pin Hole Class 3 Trailer Hitch, 12000lbs, Work Well for Tractor Bucket, RV, UTV, Truck

  • 【Tractor Bucket 2 inch receiver】— Tractor Bucket 2 inch Receiver, 2" Towing Hitch Receiver is the perfect addition to your tractor for the hobby farm enthusiast. Great for around-the-yard work requiring trailer hitches.such as boat, RV, trailer, camping accessories, etc. you will always find a job for the 2 inch receiver!.
  • 【High Quality Material】— 2” receiver with 5/8” hitch pin hole. Greatly increases the strength of the center portion of the bucket. Mig welded construction. Made of heavy duty drop forged steel inside and protected by galvanized and powder-coated double layers outside..
  • 【Specification】— Class 3 Trailer Hitch, MAXIMUM TOW CAPACITY 12,000 lbs. 2" receiver has a square opening measuring 2 inch by 2 inch. The Trailer Hitch Receiver work well with 5/8 Inch Diameter tow lock and lock pin for securing your load or for tow anchors..
  • 【Safety & Reliability】— The product adopts Gade 10.9 1/2" bolts. Bolt Length: 2.2''. High-quality hardware is included the lock nuts help to enhance stability during the operation. It can be installed on tractor buckets, trucks, ....
Check Stock

CURT 45791 8-Inch Long Trailer Hitch Extension for 2-Inch Receiver 3,500 lbs black

  • ADDED CLEARANCE. This trailer hitch extension adds 8 inches of extra length to your hitch receiver, providing additional clearance between your bumper....
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated....
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch....
Check Stock