Reviews Hitch Mount Spare Tire

Zone Tech Trailer Hitch Receiver Tube Extender (1 Pack)

• ► CONVENIENT - The Zone Tech hitch tube extender provides added clearance for a trailer or hitch-mounted accessory. Extends to 7", ideal embellishments for hitch mount bicycle rack to clear extra tire..
• ► CAPACITY - The Zone Tech hitch tube extender has a capacity of 3500 lbs GTW / 350lbs TW, for most bike rack and cargo carriers..
• ► PREMIUM QUALITY - The Zone Tech hitch tube extender is made durable high quality heavy solid steel through mechanically welded for predominant quality. With top notch equipment fittings and finished in dark powder coating for more durable conditions and free from dust and corrosion..
• ► SAFE - The Zone Tech hitch tube extender is guaranteed safe as long as you stay within th limits specified. Hitch tightener are highly suggested for tight fit and noise reduce..
• ► EASY INSTALLATION - The Zone Tech hitch tube extender are simply receiver tubes that is inserted into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back..

Towever 84332P Trailer 2 inches Hitch Extension Receiver Tube Extenders 7 inches Length with Hitch Pin and Clips

• 2inch trailer hitch extension for class 3 or 4 hitch receiver.
• Fits into 2" hitch receiver and 2" outside, Extends to 7", perfect accessories for hitch mount bike rack to clear spare tire.
• Capacity: 5000 lbs GTW / 500 lbs TW , for most bike rack and cargo carrierrs, Hitch tightener( towever 84701) are highly recommeded for tight fit and....
• Together wiith 5/8 inches Hitch Pin Kits For use.

EAG Stubby Front Bumper + Rear Bumper with Tire Carrier Combo Fit for 07-18 Wrangler JK

• PERFECT FOR OFF-ROAD USE - Upgrade your 07-18 Wrangler JK for adventurous off-roading performance by investing in the EAG Bumpers. Designed to provide your JK with superior front and rear protection, these bumpers will protect your rig in style..
• HEAVY DUTY CONSTRUCTION - Heavy duty 5/32-inch steel plate construction. Premium two stage textured black powder coat finish. High strength d-ring mounts. 9,500-pound-rated d-rings included..
• FRONT BUMPER - Pre-machined OE fog light holes are compatible with OEM fog light. (Fog lights are not included.) The adaptor is designed to mount JK sport fogs in an aftermarket bumper. Built-in winch plate, rated up to 12,000 lbs..
• REAR BUMPER - Integrated spare tire carrier use high quality bearings, which used at shaft of tire carrier for smoothest open and close with the factory tailgate, can be operated with just one hand..
• REAR BUMPER - Two powerful 12W round LED lights included. Two way adjustable tire mount for up to 37" tire for tire carrier. Class Ⅲ 2" receiver hitch rated 5,000 lbs equipped with safety chain loops..

YAKIMA StraightShot

• Extends your 2" hitch receiver by 7 1/4".
• Secures to any 2" hitch receiver using a threaded pin.
• please measure your spare tire before hand.
• Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO....

Malone MicroSport Trailer Package

• Kit includes MicroSport Trailer, spare tire that mounts to trailer tongue for safe and secure transport, and two Saddle Up Pro kayak carriers.
• Pre-assembled hubs for clean and simple installation.
• 12-inch standard galvanized wheels with marine-grade sealed bearings.
• extra-long tongue can transport boats up to 20 feet in length.
• Trailer measures 65-by-159 inches (W x D), with a 355-pound capacity and two-inch hitch mount.
• Includes limited five-year manufacturer's warranty.

Apex RC Products Rear Bumper W/Hitch Shackles Tire Mount & Lights - Compatible with Traxxas TRX-4#4061

EDOSTORY Tray Hitch Mount Bike Rack,Foldable 2 Dark Black Bicycle Rack fit for Cars, Trucks, SUV and Sedan with 1.25\ and 2\ Hitch Receiver-Hitch Stabilizer

• [EASY TO INSTALL]:Our bike rack only takes a few minutes to assemble.There is two version manual in the package,please follow "Tray Hitch Mount Bike Rack With Hitch Stabilizer Version Manual". This bike rack fit for 1.25'' and 2” hitches. Note: Not compatible with RVs, trailers, or any kind of Class B vehicles Optional hitch extender needed for cars with spare tires..
• [Htich Stabilizer]:install correctly and it can stop rattling, wobbling, rocking and significantly reducing noise.Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom.Follow the picture to install it and also can be mounted from the bottom..
• [GOOD LOADING CAPACITY]:Heavy duty all steel construction bike rack will easily transport up to 2 bicycles.max load to 120LB.Hooks and tire cradles adjust to fit most bikes frames with 20" to 30" wheel sizes.The tire cradle is only suitable for bikes whose tire width does not exceed 4 inches(10cm)..
• [DURABLE CONSTRUCTION]:durable and long-lasting all steel construction with protective powder paint finish.
• [CUSTOMER SATISFACTION]: All of our bicycle....

MAYASAF Spare Tire Hoist 924-528 Wheel Carrier Hoist Spare Tire Winch for Ford 99-07 F250(F350) Super Duty, for 99-07 F450/F550 Truck

• Durable Trailer Tire Mount: Creates an exterior spare tire location on your trailer or RV.
• it attaches easily without the need for drilling.
• Heavy-Duty Design: Spare tire carrier for trailer is made of sturdy powder-coated steel and zinc-plated hardware.
• the RV spare tire mount fits trailer tongues up to 6-inch tall and 3.5-inch wide.
• Easy Installation: Near universal-fit camper spare tire mount mounts to trailers easily and doesn't require a permanent mount.
• Compatibility: The spare tire carrier is ideal with 4 lug x 4 inch-diameter hole pattern, 5 lug x 4.5 inch-diameter hole pattern, and 5 lug x 4.75 inch-diameter hole pattern.
• Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.

Armored Personnel Carrier

• Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
• Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
• Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
• Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
• Package：Provide U bolt and 4 lug nuts are supplied.

Qualward Spare Tire Mount Bracket for Trailer, Spare Tire Carrier Powder Coat Steel Black, Fits Most 4 & 5 & 6 Lugs Wheels on 4\

• Compatibility & Fit: This trailer spare tire carrier is designed to fit trailer tongues, including boat trailers’, to 2.95″wide and 3.94″ high, and is further upgraded to hold 4-lug and 5-lug wheels with 3.94″, 4″, 4.25″ and 4.72″ bolt patterns..
• Tough Construction: Made of forged iron with solid-state welding, this spare tire mount is designed to handle tires of up to 120 lbs, and Zinc plated spare tire mount and mounting hardware is naturally resistant to rust and corrosion..
• Easy Installation: The bolt-on installation and removal is easy. No drilling is required for installation, thanks to the included tire plate and mounting hardware, which makes this spare tire mount a breeze to install and use..
• Optimized Design: The spare tire bracket provides easy access in the event that it is needed, and the close-to-trailer design helps reduce wind resistance, and it also features raised design that moves the wheel up for increased ground clearance..
• Peace of Mind: Ideal for mounting your spare tire vertically to the side of trailer tongue or frame rails, and the package includes zinc plated mounting hardware, you don’t have to buy bolts and nuts separately..