Reviews Higher Strength

Natural Path Silver Wings Colloidal Silver 50 PPM, 2oz Dropper

  • DAILY IMMUNE SUPPORT: Natural Path Silver Wings Colloidal Silver 50PPM is our most versatile strength. 5 times stronger (more silver particles) per serving than 10PPM silver solutions. Higher PPM strength offers convenience of less dosages per day. Properly prepared pharmaceutical grade colloidal silver is safe to use in higher PPM strengths and concentrations. For those who prefer 10PPM, approximately 1 dropperful (1mL) is 10PPM (50 mcg)..
  • SMALL SILVER PARTICLES ARE MORE BIOAVAILABLE. Natural Path / Silver Wings Colloidal Silver average silver particles range from 0.6nm – 3nm. It is easily absorbed and readily available for your body’s immune support needs. Silver Wings Colloidal Silver is safe, more bioavailable and effective for immune support than competing brands..
  • WHAT IS PARTS PER MILLION (PPM)? PPM (STRENGTH) is the number of silver particles per serving yields greater concentration and increased immune support. Silver Wings offers products in 50PPM, 150PPM, 250PPM, and 500PPM..
  • IS COLLOIDAL SILVER SAFE? Yes. Due to the unparalleled silver particle size, Silver Wings Colloidal Silver is safe for the whole family. Properly prepared pharmaceutical grade colloidal silver is safe to use in higher PPM strengths and concentrations. Natural Pa....
Check Stock

Bankers Box 00302 STOR/DRAWER Steel Plus Storage Box, Check Size, Wire, White/Blue (Case of 12)

  • Bankers Box Stor/Drawer Steel Plus Recycled Storage Drawers Stacking System. Extra Strength—For moderate use and higher stacking needs. Medium-duty frame offers rugged storage for occasional file reference..
  • Extra Strength—For moderate use and higher stacking needs..
  • Medium-duty frame offers rugged storage for occasional file reference..
  • Thick, multi-wall drawers hold up to moderate daily usage..
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Gate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

RIKIMARU Fluoro Fishing Line, 100% Fluorocarbon Coated Fishing Line (Clear, 12LB/0.32mm/300Yds)

  • Quickly reach target water level:Rikimaru fluorocarbon coating uses a material that is denser than water and can quickly settle to the target water layer, reducing the impact of current and other factors on the fishing experience..
  • Advanced materials:Rikimaru fluorocarbon coating combines the best of both worlds with a polymer core and a high strength fluorocarbon coating, allowing you to enjoy fishing in all conditions..
  • Impact resistant:The polymer core provides the product with amazing strength and can provide you with enough support while you fight with fish..
  • Higher cost performance ratio:Compared with fluorocarbon thread, fluorocarbon coating has a higher cost performance ratio.High strength and wear resistance are the major advantages of fluorocarbon coating over monofilament wire. You can now obtain a perfect substitute with similar quality and performance of fluorocarbon wire at a lower price..
  • Low visibility:Rikimaru fluorocarbon coated integral material has a light refractive index similar to that of water, can provide sufficient concealment, which is difficult to see underwater..
Check Stock

303 Oil Filter-2 Pack Motorcycle Oil Filter - for YAMAHA/POLARIS/HONDA/KAWASAKI Fits Multiple Makes and Models.

  • Ultra-strength filter housing that can endure higher burst strength than conventional filters.
  • O/E replacement oil filters for most cars, trucks, SUV’s, motorcycles, & ATV’s.
  • Resin-impregnated filter media traps 99% of harmful contaminants.
  • Advanced high performance tri-fiber filtration media for optimum filtration, higher capacity, and improved oil flow，and is compatible with all oil types。.
  • If you are not satisfied with the Oil Filter , please feel free to contact us and we will give you a full refund in the first time..
Check Stock

SHOUCAN Titanium Sheet Plate Thickness 1-4mm Ta2 Metal Titanium Suitable for Aerospace Industrial, 100×100mm/200×100mm,100×100×1.5mm

  • ✈ High plasticity: Density titanium alloy generally about 4.5g / cm3. which is only 60% of steel. Mechanical strength, twice as big as aluminum, magnesium greater than five times.The strength of titanium alloy is higher than that of general stainless steel and aluminum alloy, and can reach twice that of stainless steel..
  • ✈ High heat intensity: Temperature of several hundred degrees higher than aluminum. The melting point of 1942K, higher than gold 1000K, higher than steel 500K.The melting point of pure titanium is 1678°C. After adding alloying elements titanium alloy, the melting point of the alloy generally decreases, and generally decreases with the increase of the alloying element addition..
  • ✈ Good corrosion resistance: Titanium work in a humid atmosphere and seawater, the corrosion resistance is far superior to stainless steel.
  • for pitting, etching, stress resistance particularly strong.
  • and other organic materials have excellent corrosion resistance..
  • ✈ Good low temperature performance titanium alloys at low temperatures and extremely low temperatures, can still maintain its mechanical properties. It maintains good ductility and toughness at low temperatures of -196-253°C, and avoids the cold brittleness of metals, which makes it an ideal....
Check Stock

Boston Gear HLK103Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock