Reviews High temperature O rings

Danco 1-1/4 in. OD x 1 in. ID, Rubber, #19 O-Ring, 20 per bag, 35736W

  • O-Ring Dimensions: 1-1/4 in. OD x 1 in. ID x 1/8 in. wall thickness.
  • Danco O-Ring #19 (AS568B# 214): Compatible with Groen, Speakman, and Zurn faucets.
  • These tough, pliable Buna-Nitrile Rubber (NBR) O-Rings help eliminate leaks, prevent faucet drips and provide long-term use for your plumbing needs.
  • O-rings have high abrasive and a high level of tempature resistance that will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C).
  • Danco o-rings are widely used by plumbeing proffesionals and DIY homeowners alike to prevent plumbing issues.
  • Includes 20 O-Rings per bag for faucet repair.
Check Stock

Raincol O Ring Kit Rubber O Rings Assortment - 270 Pcs 18 Sizes for Automotive, Gasket Fuel Resistant Faucet Plumbing Assorted Sealing Washer, Piece Repair NBR, Removal Tool and Silicone Grease

  • ...: Universal O Ring buna kits, mechanic nitrile repairs, essential for all workshops and onsite service engineers. Range of 18 sizes Rings, no need to purchase individual O-Rings. Quick identification and easy storage for multiple O-Ring kit contains 270 pieces in 18 different sizes. O-rings have a high chemical and temperature resistance alongside a low compression set.
  • ✔️MATERIAL: Rubber O Rings, built of high-quality Nitrile Butadiene Rubber (NBR) material for resistance against UV, lubricants and greases, Heat-resisting, mineral oil-resisting, wear-resisting, petrol, and hydraulic oil, useful for seals sink, remover water fitting. Temp. resistance low: - 90 °F Temp. resistance high: 250 °F.
  • ✔️100% MONEY BACK GUARANTEE. We made sure that this O Ring Kit meets the highest standard of quality but if for ANY reasons you are not satisfied, you will receive a refund. Click on "Add to Cart" button NOW and get this amazing new product..
Check Stock

820pcs O Rings, O-Ring Assortment Kit, 18 Sizes Rubber Gasket Ring Kit, Nitrile Rubber Silicone Seal Ring Set with 2 Seal Removers for Plumbing, Faucet and Automotive Repair

  • 18 Common Sizes: There are 820pcs O rings in 18 common sizes, which are 30pcs of 3*1.5mm, 30pcs of 4.5*1mm, 40pcs of 5*1.9mm, 40pcs of 6*2mm, 40pcs of 7*2mm, 70pcs of 8*2mm, 70pcs of 9*2mm, 70pcs of 10*2mm, 70pcs of 12*3.1mm, 70pcs of 13*3.1mm, 50pcs of 14*3.1mm, 50pcs of 17*3.1mm, 50pcs of 18*3.1mm, 30pcs of 20*3.1mm, 30pcs of 22*3.5mm,30pcs of 24*3.1mm, 30pcs of 15*3.1mm,20pcs of 28*3.1mm..
  • Wide Application: This nitrile rubber metric o ring works great on hole seals, oil seals, water seals, guide rings, fixed seals and shaft seals. It can effectively prevent fuel, water pipes, mechanical, hydraulic and hydraulic systems from leaking.
  • High Temperature Corrosion Resistant Material: The sealing rings are made of high quality nitrile rubber. It has good resistance to oil, water, high temperature and high pressure resistance. Working temperature range is -40℃(-40℉) to +120 ℃(+248℉).
  • Practical Package: This o-ring assortment kit is stored in 24 grids according to the size, and you can easily choose the size you want..
  • Good Performance: The o-ring assortment kit has good compression, abrasion resistance and elongation. High adhesive content, high elasticity, no obvious chemical smell. Durable for long time use..
Check Stock

KEZE 870 Pcs 18 Size O Rings Kit with 4pcs Rubber Oring Remover Set for Automotive Faucet Plumbing Sealing Repair OD:5mm-33mm

  • ... nozzles,sinks,filters,hydraulics fluid,auto engines, motorcycles, machinery bearings, pumps, boats, valve,spray,water fitting leak repair, pneumatic connection,oil,air,gas seal..
  • 【MATERIAL】Rubber o-rings set made of high-quality commercial grade black flexible nitrile(NBR) 70 Duro material,it has excellent high temperature and low temperature resistance,the working temperature range is from -40℃/-40℉ to 120℃/248℉, maintains good elasticity, has It has the advantages of ozone resist oil and heat..
  • 【CONVENIENT STORAGE】Orings rubber are placed in a sturdy plastic storage box, each size with detailed label paper,are stored in order of small to large for easy retrieval..
Check Stock

Buna-N O-Ring Kit, 90A Durometer, 30 Sizes (Pack of 382)

  • ...gines, faucets, flanges, valves, and various cylinders..
  • [Features]-Soft and elastic O-ring, simple buckle, easy to install. Nitrile rubber O-rings can meet most pipeline, automotive and general maintenance needs..
  • [Easy to Use]-This nitrile rubber (NBR) sealing ring has abrasion resistance, pressure resistance, high temperature resistance, oil resistance and waterproof ring seal. You can use it in many places in your daily life and work. We have various thicknesses and sizes for you to choose from..
  • [Application]-Rubber O-rings are mainly used for power supplies, control boxes, universal power cord socket protection, electrical appliances, motors, tools, cars, trucks, trailers, electronic equipment, toys, bicycles, RVs, boats, pumps, furniture, etc..
Check Stock

Polyurethane O-Rings, MAGT 10pcs 13.81.9mm High Strength Polyurethane O-Rings for Paintball Gun CO2 Air Tank (Beige)

  • 【Durability】Standard fill o-ring,resistant to high temperature and corrosion, durable for use..
  • 【Air tightness】Polyurethane O-rings gives you perfect airtight performance to prevent gas leakage..
  • 【Scope of use】Suitable for your tank with all sizes, works with Co2, air..
  • 【Size】Polyurethane O-rings diameter is 13.8mm, thickness is 1.9mm.Suitable for valve with similar size..
  • 【Widely used】Polyurethane O-rings can be use in paintball, airsoft, air guns,CO2 air tank and more..
Check Stock

Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5" TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch triple clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

BUSY-CORNER 495 Pieces SAE Metric O Ring Kit with O-Ring Pick & Installation Tools Rubber Washer Orings for A/C Professional Plumbing Automotive(Green Green)

  • 1.High Quality:Made of Nitrile (NBR) 70 shore material,are durable,high temperature resistance,anti static,oil resistant,UV resistance,wear resistant..
  • 2.Multi size: You can get a good selection of 36 different sizes o ring that come in handy,can meet almost all your needs.You also can get one piece o-ring tool,it can let you to remove o rings,various seals and bushings more easily..
  • 3.Wide Application: Nitrile rubber is the most widely used o-ring material all over the word.it’s use for cylinder,car air conditioning (A/C system), pump,automobile,roller auto,home appliances,furniture,faucet,electronic appliances,doors,windows,bearing,pump garages,general plumbers,mechanics,workshop etc..
  • 4.Handy Packing: Equipped with a transparent plastic box, all O Rings are well placed in separated small grid-shape space, that makes more convenient to carry, select and collect..
  • 5.Customer Service: You are unhappy for any reason, return your kit with no questions asked and we will provide a full refund..
Check Stock

(2 pack)Hilangsan 1.5\ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined..
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily..
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking..
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter..
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!.
Check Stock

MCIGICM 826 pcs SAE Metric O Ring Assortment, 407 pcs SAE O-Rings and 419 pcs Metric O-Rings

  • 【PACKAGE INCLUDING】 This o ring kit contains 770 o-rings in 18 sizes. A wide range of sizes and quantities will meet your needs..
  • 【MATERIAL】 Made of high quality nitrile rubber(NBR). The applicable temperature range of the rubber O-ring is from -40℉ (-40℃) to +248℉ (+120℃)..
  • 【WIDE APPLICATION】 The o ring assortment is suitable for the leak repair of resist oils, hydraulic fluid, water and abrasion in kitchen, bathroom, auto engines, pressure washer and plumbing ..
  • 【EASY STORAGE】Comes in a Handy Plastic Organizer Case with Sized Compartments. Each size comes with a label for easy picking and storage..
  • 【CUSTOMER SERVICE】We Take Pride in Delivering a Quality Product. If you are Unhappy with This Product, We would Return Your Kit for Free with No Reason..
Check Stock