Reviews High temperature Couplings

Jiffy Commercial Pro-Line Hat Steamer in Pink

High-impact engineered polymer outer housing for durability"No-spill" check valve capColor-coded high temperature wiringFusible link with automatic shut-off for safety.

1/4" x 1/4" flared union for connecting and disconnecting two pipes more easily than couplings.
This fitting has a 45-degree flare connection on both ends..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Operating temperatures range from -65 to 250 degrees F.
Suitable for copper, brass, aluminum, and steel tubing.

Ultra-lightweight & Accessible - A practical addition to your set of firefighter tools, our mini spanner weighs only 2.5 ounces each. It fits in your bunker gear pocket, making it easy to access any time, anywhere..
Heavy-duty - Our mini spanner wrench is made of 6061 T6 aluminum, a metal suitable for tough tasks while firefighting. Small yet sturdy and tough, it excels at getting the job done.Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
Tightens Couplings - Use this firefighter spanner wrench to tighten and secure loose couplings. Whether it’s for a standpipe connection or for an attack line, the spanners work on all caps and couplings on the fireground..
Undoes Couplings - No need to run back to the truck to grab spanners. Keep these mini spanner wrenches in your bunker gear pockets..
Great Value Pack of 2 - This firefighter spanner wrench comes in pairs..

Edelmann OE quality power steering hoses and components are crafted from long-lasting, high-performing materials that ensure durability under the harshest conditions on the road.
OE fit, form, and function ensures ease of installation, correct hose/tube routing and leak free performance.
Hose construction withstands internal oil temperatures of up to 300 degrees Fahrenheit, ensuring component integrity in high-heat, high-stress operating environments.
Tubing is coated with a Zinc-Aluminum Alloy with an Aluminum-Rich Epoxy topcoat, and the couplings and fittings are zinc-plated for rust and corrosion protection.
16MM Male O-Ring fitting X 3/8 inch I.D. Hose.

【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.

Outstanding performance for virtually all applications: high temp wheel bearings, disk brake wheel bearings, U-joints, couplings, severe service high....
Flawless operation in temperatures from - 40F up to 400 F for continuous operation.
Unmatched, high adhesion to metal components.
stays in place in the most extreme service.
state-of-the-art additive pack for excellent corrosion inhibition, the optimal flow rate in grease pumping....
One grease for almost everything with the highest performance rating for nearly all applications.

Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications..
Maximum Operating Temperature: 212 deg. F.

【13 Couplings】This Excavator Pressure Tester Kit comes with 13 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
【High-quality Gauges】The housing of our five gauges (150PSI/1500PSI/3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
【Complete Kit】Comes with 13 x Couplings, 14 x Tee Connectors, 5 x 61.5'' Test Houses, 5 x Pressure Gauges, and 1 x Sturdy PP Suitcase..
【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..

【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
【12 Couplings】This Excavator Pressure Tester Kit comes with 12 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
【High-quality Gauges】The housing of our three gauges (3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
【Complete Kit】Comes with 12x Couplings, 3x 65'' Test Houses, 3x Pressure Gauges, and 1x Sturdy PP Suitcase..
【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..

[4 Pressure Gauges] - This pressure test kit includes 4 high precision silicone oil gauges: 1500psi(100bar), 3500psi(250bar), 6000psi(400bar), 10000psi(600bar)..
[10 Couplings] - The hydraulic gauges kit has 10 pcs couplings: G1/8, G1/4, G3/8, M10*1, M10*1.25, M12*1.5, M14*1.5, UNF7/16-20, UNF9/16-18, Quick connector B..
[High Quality Materials] - Advanced silicone oil, stainless steel waterproof gauges, carbon steel couplings..
[Thicken Portable Case] - All parts are neatly placed in a thickened case with non-deforming sponge to better protect the product..
[Wide Application] - This excavator pressure gauge set is suitable for most brands of excavators, such as Sany/Caterpillar/CASE/John Deere/Komatsu/HITACHI/Kawasaki/Kato, etc..