Reviews High quality Low Carbon Steel

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

BRONSON SPEED CO. G3 Skateboard Bearings - Set of 8

  • IMPACT RESISTANCE, NOT FALLING APART, STRONG RELIABILITY: The material of this skateboard bearing is high carbon chromium bearing steel, which is harder and tougher than carbon steel..
  • GOOD SEALING PERFORMANCE: This skateboard bearing uses RS structure sealing ring, which is better than ZZ structure sealing ring, and has a smaller friction coefficient and smoother than RZ structure sealing ring. It can be used in all kinds of bad weather..
  • SMOOTH AND QUIET: This skateboard bearing uses high-quality lubrication, the sound is small and smoother, and the experience is good..
  • HIGH QUALITY: This skateboard bearing has high processing accuracy, which fully meets the requirements of the use of scooters, and can be used on tools or instruments that require high speed and low noise. For example: vacuum cleaner, fingertip spinning top, etc..
  • LONG SERVICE LIFE: This skateboard bearing has better wear resistance and longer service life than the bearing made of carbon steel..
Check Stock

16" Long hand forged Damascus steel Hunting Bowie Knife, Bull horn and wood scale with Brass finger guard & Pommel, Cow Hide Leather sheath with belt loop

  • Overall 16" Long Bowie knife. 10.5" long blade Hand forged Damascus steel blade with 9.5 Inches cutting edge..
  • 5.5" long Black Horn and wood scale with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Twist pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 6\ X 6\ - 4 Holes 1/2\ Diameter - Rounded Corners - 1/4\ Thick - 8 pcs

  • 1095 blade steel specifications: 1.57 inches wide * 12 inches long * 0.16 inches thick,Weight: 0.8 lb * 3.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

World Points 1027 Rose Wood Damascus Kitchen Knife Set Professional 6 Piece, Handmade Damascus Steel Chef Knife Set with Chopper/Cleaver And 6 Pocket Original Leather Roll Bag, WP-1027

  • these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded.
  • The High Grade Damascus steel used for these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife..
  • How to care for your new knives: - Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. - After use, wash and dry the blade and apply vegetable oil, or any food safe lubricating oil..
Check Stock

HOMOW 9 Inch Large Heavy Duty Non-Stick Fluted Tortilla Shell Pans Heat Resistant Flower Baking Molds,Brioche Molds 2 pcs

  • Material: Heavy duty high carbon steel + Premium Whitford Xylan coatingMaterial: high-carbon steel + Whittford Xylan coating, Made from professional-quality high-carbon steel pans with premium non-stick coating.
  • Measure 3.7 inches/9.5cm height and 9 inches/23cm diameter. 2 pack..
  • Make crispy low-fat tortilla bowls without frying.
  • Use these baskets to serve taco salads, salsa, dips or your favorite appetizer.
  • Provides a baked healthy alternative to fried tortilla shells.
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Gun Brushes 12 Piece Gun Cleaning Kits Includes Double-Ended Brush Cleaning Picks Cleaning Patches 6 Inch Cotton Swabs and 20ML Oiler

  • 【Double-ended Brushes Nylon Brass and Steel Brushes】Softer nylon and medium brass brushes are great for removing any residue on the surface. The steel bristles are hard enough to easily remove any agglomerated carbon. The thin end is very useful for cleaning in narrow places..
  • 【4 Multifunction Head Pickss】 - Each Double-ended pick has different sharped tool at end,and they're potentially useful for different parts of different guns.They work perfectly for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
  • 【1 Stainless Steel Polymer Picks】Unlike ordinary dentist tools, this stainless steel double-headed pick has a hook that can penetrate deep into the gap to clean the internal area, One end is a mini shovel that can remove carbon/residues and other stubborn dirt..
  • 【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
  • 【50 Pieces cleaning patches 2.95X2.95 inches 7.5X7.5cm】Quality cotton patches for cleaning your gun.....
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

VIVOHOME 30 Inch Height Wrought Iron Bird Cage with Rolling Stand for Parrots Conure Lovebird Cockatiel Black

  • STURDY FRAME - This large birdcage is made of high-quality, low-carbon, rust-proof and waterproof steel, with guaranteed quality and durability.
  • The steel frame is more stable, with 4 caster wheels at the bottom, so you can move it anywhere you like, saving you effort.
  • CONSIDERATE DESIGN - This cage is covered with non-toxic hammer-pattern paint, giving birds a healthier and safer living environment.
  • Designed with a strong base to ensure stability for daily use.
  • A drawer-type sandbox and mesh shelf are added for convenience and accessibility.
  • EASY CLEANING - To clean the bottom of this birdcage, all you need to do is to slide out the bottom tray and wash it off.
  • Additionally, all shelving can be easily removed for easy cleaning, so as to keep a clean and tidy environment as well as keep your pets safe.
  • SAFETY & SECURITY - Our birdcage is made of low-carbon steel, which is rust-proof and water-resistant, and the latches are strong and durable.
  • Steel wires are evenly spaced to ensure safety and meet ornamental value at the same time.
  • ABUNDANT ACCESSORIES - In addition to high-quality steel cages, we also provide you with 2 white plastic food boxes, 2 long wooden sticks.
Check Stock