Reviews High end Vehicles

5pcs Front End Service Tool 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit

  • ALL-IN-ONE TOOL KIT - Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm, 1x Pitman Arm Puller, 1x portail custom moded case..
  • COMPATIBLE WITH FOLLOWING VEHICLES - The tool set allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • HIGH QUALITY - Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • MULTIFUNCTIONAL USE - Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause..
  • PORTABLE CARRY BAG - All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simpl....
Check Stock

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

  • Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
  • Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
  • The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
  • This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
  • NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..
Check Stock

Magisale Low Profile Plastic Car Service Ramps 6 Ton Heavy Duty Truck Vehicle Ramps for Oil Changes& Maintenance- 4 Pack

  • [CAR RAMPS] Compared with most car ramp sets, Magisale low profile plastic car service ramps contain set of 4 pcs, for the easier way to change oil, repair and maintain your vehicles.
  • [8.3° INCLINATION & 2.6” High] 8.3° loading angle makes it easier and safer for low clearance vehicles. Lifting low profile cars for 2.6 inches higher, please confirm the height before purchase.
  • [SPECIAL DESIGN] Features honeycomb channels to prevent moisture build-up, making it easy to clean the car ramps. Curved top and bulged end prevent from driving crossed the end of car service ramps and stop the vehicles sliding down.
  • [HEAVY DUTY PLASTIC] Made of lightweight but high-impact and strengthened PP material. These low profile ramps are designed for durability. It’s safe and sturdy to easily accommodate cars or trucks for maintenance.
  • [MEASUREMENTS] Each car ramp size: 27.2" L x 7.9" W x 3”H.
  • Package size: 27.95" L x 8.26" W x 8.66" H.
Check Stock

Hobbypower 2 Pcs Universal Joint Coupling Steering Connector Adapter 6mm to 6.35mm 1/4" for Remote App Controlled Vehicles

  • Usage: Fit for Remote & App Controlled Vehicles..
  • Remote & App Controlled Vehicles's accessories..
  • accessory for Remote & App Controlled Vehicles's accessories..
  • For example: "6mm To 6.35mm" means: the aperture at one end is diameter 6mm, the other end diameter 6.35mm..
  • Package Includes: Universal Joint Coupling 2pcs, Grup Screw 4pcs.
Check Stock

Fisher-Price Little People Loops 'n Swoops Amusement Park (Amazon Exclusive)

  • Lift the jump at the end of the loop to send a vehicle flying.
  • Send vehicles down roller coaster ramp for lights &.
  • See the star spin when a vehicle drives under the monkey.
Check Stock

TonGass (2 Pack) Lower Control Arm Prying Tool - Specialty Tools for Mechanics Lower Control Arm Tool, 6007 Control Arm Prying Tool

  • Gets The Job Done Right - Our 2 pack Lower Control Arm Prying Tool is a specialty made pry bar to pry down the lower control arm to separate the lower ball joint..
  • Turns A Two Man Job Into A One Man Job - Installing wheel bearings, front axles and CV Joints used to require two people but now only requires one with this tool..
  • Works For Most Front-Wheel Drive Vehicles - Applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans..
  • Works With Any 7/8" Diameter Pry Bar - The hook end fits lower control arm.
Check Stock

MOTOKU Replacement for 6 Pin P OBD1 to OBD2 Diagnostic Tool Adapter Cable Connector Scan Code Reader for Jeep for Dodge

  • For OBD1 cars with 6 pins OBD1 diagnostic connector. Also good for a lot Jeep, Dodge vehicles with OBD1..
  • One end for the 6 pins on the car, the other end for diagnostic tools..
  • On Board Diagnostics - OBD has a very long history. But only part of the OBD1 systems became OBD2 standard. We can use OBD2 tools on those OBD1 cars....
  • NOT for ALL the OBD1 vehicles. If not working, connect us for a refund directly..
  • Not good for the following vehicles: 1995 Jeep Grand Cherokee.
Check Stock

Orion Motor Tech 5pc Ball Joint Separator Pitman Arm Puller Tie Rod End Tool Set for Front End Service Splitter Removal Kit BL06

  • 1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint....
  • 2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service....
  • 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint....
  • 4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on....
  • 5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want....
Check Stock

Venom Drive Series 7S 3000mAh 8.4V NiMH Battery – Includes 12 AWG Soft Silicone Wire Connector, Patented Universal Plug/Adapter System Compatible with Deans, Traxxas, and EC3 Plug Types

  • HIGH POWER, LOW NOMINAL VOLTAGE: The Venom 7S 3000mAh 8.4V Nickel-Metal Hydride Battery is designed to provide high power with minimal voltage drop. This battery has been tested and proven to be compatible with a variety of radio-controlled vehicles, which may require modification to the wiring harness by the end user..
  • ADVANCED PERFORMANCE:This battery has been tested and proven to be compatible with a variety of radio-controlled vehicles, which may require modification to the wiring harness by the end user..
  • RUGGED AND STURDY: The Venom 7S 3000mAh 8.4V pack will give you all of the punch you need to tackle the track at full throttle performance. It ensures strong, long-lasting power to fuel your passion. Using the latest in Nickel Metal Hydride technology and select materials for improved performance, safety and cycle life, it won’t let you down..
  • IDEAL COMPATIBILITY: The Venom 7S 3000mAh 8.4V NiMH battery with UNI 2.0 Venom UNI 2.0 Land Plug, Compatible with XT60 Plugs, Plug, Deans Plug & EC3 Charger is great for most 1/10 brushed RC boats, 2WD and 4WD cars, trucks and buggies. Allows solder-free plug conversion and plug and play use with today’s most popular RC vehicles. Venom UNI 2.0 adaptors are not compatible with NiMH only chargers..
Check Stock

YHAAVALE 51" Roof Rack Cross Bars,Universal Aluminum Luggage Crossbar with Anti-Theft Keyed Locking Fit for Car SUV Without Roof Side Rail( Naked Roof)

  • The Rooftop Cargo Cross Bar was designed to solve the problem of limited storage space in the car.Great ideal for hauling extra cargo bags, camping equipment, luggage and more..
  • Measures 51" END TO END,Each cross bar measures a maximum of 47" span (useable length) for install,providing ample room for your gear!.
  • Made from high strength aluminum, light weight and durable, water-proof and anti-corrosion.
  • Easy to install:Come with four kinds of clamps for universal fitment,Lockable.Come with necessary installation tools, and easy to assemble and disassemble in a few minutes..
  • Universal Fit For Most 4-Door Models Vehicles ( Cars, SUVs, Trucks, etc ) with Naked Roof (**IMPORTANT NOTE: Will not fit vehicles with any types of actual side rails, like integrated side rails, raised side rails).
Check Stock