Reviews High Voltage General Cable

Waterproof Tape Electrical Tape High Voltage Rubber Self-Adhesive Insulated Wire High Temperature Underwater Submersible Pump (Color : Black)

  • ✵. Suitable for electrical, electric wire, outdoor submersible pumps, etc., rubber insulation, high safety..
  • ✵. High-voltage insulation self-adhesive tape, strong insulation, high toughness, suitable for power industry, automobile and machinery maintenance.
  • ✵. strong adhesion, wear resistance, strong viscosity, anti-aging and waterproof and anti-interference, not easy to fall off, can be used in water, no leakage, and prevent accidents..
  • ✵. Economical general-purpose rubber tape with good self-adhesiveness, the insulation layer is integrated after bandaging, it is not easy to fall off, and the sealing is good.
  • ✵. It is suitable for the insulation protection of the normal working temperature not exceeding 80 kW, the insulation protection of the 10KV and the rubber in the cable terminal and the middle connection and the insulation of the communication cable connector..
Check Stock

3pcs High Voltage Generator DC 6-12V to 1000kV Boost Step-Up Inverter Arc Pulse Generator Power Module High Voltage Transformer (1000 KV)

  • High Voltage Generator:Input Voltage: DC 6V to 12 V.
  • High Voltage Generator Cables: Output Cable Length: About 100mm.
  • Input Cable Length: About 100mm(Red is Positive).
  • High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
  • Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
  • Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..
Check Stock

Morris Products Roller Ball Door Contact – Open Circuit On – 12 Contact Volts, 1.27 Hole Spacing – For Security, Alarm Systems & Opening, Closing Low Voltage Circuits, Switching Applications

  • USED WITH DOORS, WINDOWS, BELLS AND BUZZERS: This roller ball door contact from Morris Products is suitable for security and alarm systems as well as doors, windows, bells and buzzers to signal circuits and general low voltage switching applications..
  • LIGHT OR ALARM ACTIVATION: Easily open and close a low voltage circuit to activate a light or alarm when a door or window is opened with this roller ball door contact for low voltage is installed..
  • DURABLE CONSTRUCTION: Featuring a closed plastic housing, this roller ball door contact is resistant to dust and corrosion and works with time-activated switches..
  • VERSATILE UNIT: Choose from roller ball door contact models that feature open circuit on, open circuit off and make and break circuit types. These roller ball door contacts from Morris Products are available with 12, 24 and 48 volts, 1-2 AC Amps and 0.5, 1 and 2 DC Amps..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Dsstoc LED Rechargeable Flashlights High Lumens, 90000 Lumens Super Bright Tactical Flashlights with Rechargeable Battery, 5 Modes, Zoomable, IP67 Waterproof Flashlights for Camping Emergencies

  • ...00 square feet. The super bright flashlight allows you to easily see any strange things in the dark, so you no longer worry about the dark..
  • 【LONG LASTING】MT100 brightest tactical flashlight uses a rechargeable lithium battery, which can support the use of this LED rechargeable flashlight for 8-12hours. Use over-voltage and short-circuit protection technology to avoid damage to the flashlight caused by voltage instability during charging. The led flashlight rechargeable battery solves the problem of overcharging and overdischarging, prolonging the life of the high powered flashlight..
  • 【LOW BATTERY DISPLAY & TYPE-C FAST CHARGING】MT100 high lumens tactical flashlight has a power display function. The power indicator light above the handheld flashlight can help you clearly understand the battery usage (100%, 75%, 50%, 25%). With the Type-C fast charging interface, you can use the USB charging cable (included) to connect to an AC charger, car charger, mobile power bank or computer to charge the high-power flashlight..
  • 【5 MODES & WIDELY USED】MT100 tactical camping flashlight is designed with 5 light modes of high/ medium/ low/ strobe/ SOS. In strobe mode, the flash light can scare strange things in the dark. In SOS mode, the MT100 tactical campin....
Check Stock

3 Pin Waterproof Connector, Industrial Solder Power Connector, Aviation Electrical Connectors Work with Electric Motorcycle, Yacht, and Other Indoor/Outdoor Wire Connectors(Metal+Plastic)

  • 3 Pin Connector Specifications: The working voltage of the power connector can reach AC 500V, and the rated current is 20A. General wire diameter: Φ9.0mm～Φ13.0mm.Cable specification: 2.5 --4.0mm²/14-12 AWG.Contact resistance 003c1.0mΩ.Waterproof Protection level: IP67. Package list: 1 male plug + 1 female socket..
  • High-Quality Material: Our 3 Pin Connector uses a PBT material shell that is imported from abroad with stability, compression, anti-explosion, and anti-deformation. Use zinc alloy material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Cable Wire Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: at each point does not exceed 3 seconds..
  • Perfect Waterproof Wire Connectors: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well water-resisting. Even in harsh outdo....
Check Stock

HiLetgo USB Logic Analyzer Device With EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

NOYITO USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V003cbr003e.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

2 Pin Connector Waterproof Connector, Industrial Solder Power Connector, Aviation Cable Connector for Automotive, Marine, Lights and Other Indoor/Outdoor Electrical Wire Connections(Metal+Plastic)

  • 2 Pin Connector Specifications: The working voltage of the power connector can reach 400VAC, and the rated current is 10A. General wire diameter: Φ3.0mm～Φ9.0mm. Cable specification: 1.0 --1.5mm²/18-16 AWG. Contact resistance .
  • High-Quality Material: Our 2 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Use metal material flanges seat, against high-frequency noise and electromagnetic interference. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Cable Wire Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds..
  • Perfect Waterproof Wire Connectors: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in water-resisting. Even....
Check Stock

Woods 55213143 16/2 Low Voltage Lighting Cable, 100-Feet

  • VERSATILE OUTDOOR LIGHT CABLE FOR LOW VOLTAGE LANDSCAPE LIGHTS: suitable for low voltage outdoor projects like accent lighting, path lights or spotlights.
  • DURABLE ELECTRIC OUTDOOR WIRE: water, dust and dirt resistant vinyl jacket withstands prolonged sun exposure and offers long-lasting durability.
  • TANGLE-FREE LOW VOLTAGE OUTDOOR CABLE: doesn’t crack under high heat or turn hard in the cold.
  • INDUSTRIAL-GRADE QUALITY LIGHT CABLE FOR OUTDOOR USE: RoHS compliant and UL Listed for any home improvement project.
  • SPECIFICATIONS: 100 ft, 16 awg, rated for direct burial for low voltage garden lights under 30 volts including common 12V systems.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M8 3-Pin Female A-Coding Rear Flange Joint

  • 3 Pin Connector Specifications: The working voltage of the 3 Pin waterproof power connector can reach 125VAC, and the rated current is 5A. General wire diameter: Φ3.0mm～Φ6.0mm. Cable specification: 0.34 --0.75mm²/18-20 AWG. Contact resistance 003c5mΩ. Mounting dimensions: 12mm. Waterproof Protection level: IP67. Package list: 1 plug + 1 socket..
  • High-Quality Material: Our 3 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
  • Easy to Install Circular Connector: Cable connection type: Soldering. Cable in-line, threaded coupling, quick connect, solder plug & socket. Note: Prohibited to charged inserted. The wiring welding temperature requirement is 380℃±40℃, operation time: each point does not exceed 3 seconds. Note: Prohibited to charged inserted..
  • Perfect Waterproof Aviation Connector: The waterproof connector can be up to waterproof IP67 protection level when connected, its rigid spring snap fastening self-locking device waterproof ring is well in water-resisting. Even in harsh outdoor weather conditions, it can stil....
Check Stock