Reviews High Torque Tap And Drill

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

  • ★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
  • ★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
  • ★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
  • ★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
  • ★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
Check Stock

SEYVUM P10 21V Cordless Drill Set, [Powerful Brushless Motor] [Compact], Power Drill Driver, Electric Drill with Li-ion Battery, Fast Charger, Variable Speed, 57pcs Drill Bits with Tool Bag

  • POWERFUL BRUSHLESS MOTOR & LONG LIFE - Cordless drill with brushless motor, high power ceiling, and long service life. The maximum speed of the drill is 1500rpm, and the maximum torque is 400in-Lbs. Also brushless drills don’t generate friction or heat during use, last longer than brushed motors, require little maintenance, and perform better and more smoothly.
  • 25+1 CLUTCH & METICULOUS AND THOROUGH - An 25+1 position clutch prevents the stripping of screws and delivers 400 in-Lbs (45N.M) of max torque. Power drill's multi-position clutch will deliver precise power where you need it. When faced with a change of density in materials. The electric drill allows you to set the gearing for low speed and high torque or high speed and low torque.
  • 2 VARIABLE SPEED ADJUSTMENT - The electric drill is designed with variable 2-speed settings (0-550 rpm and 0-1500 rpm) for multiple purposes. The drill trigger controls the speed. Being able to vary the speed makes it easier to start holes, drive screws, and drill metal. The reversibility option can help reverse drills out of holes and remove screws.
  • 1H FAST CHARGE - Our power drill cordless used with a max 21V Lithium-ion battery and 1H fast charge. At the same time, the brushless motor consumes less energy and....
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock