Reviews High Tensile Steel Angles

Deer Fence Posts – Angle Steel Black Garden Fence Poles (8 feet (10 Poles))

  • HEAVY DUTY Long lasting premium quality high-carbon rail steel posts with tensile strength of at least 80,000 lbs. per square inch. This higher quality steel gives more strength per weight than average fence posts..
  • WEATHER RESISTANT black powder coated, will not rust, corrode, or fade.
  • FUNCTIONAL two 11 GA flanges at 90 degree angles, Flange width: 1-1/4”, with 5/16” holes punched out 2” apart on one flange for easy connection of fencing with zip ties or connecting two poles together(bolts, nuts, washers not included).
  • GREAT FOR DEER OR GARDEN FENCES protect your property or garden with these durable posts. Recommended spacing of poles would be a maximum of every 15 feet..
  • MULTIPLE SIZES AVAILABLE either 8 ft or 4 ft tall. Sold in sets of 10 posts per bundle. Or get our combo set with both 8ft and 4ft posts.
Check Stock

CNBTR 5mm Bore Hole Diameter Brass Gear Shaft with 20 T Wheel 0.5 Modulus Set Drive Gear Box Shaft

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
  • High carbon steel for tensile strength and hardness.
Check Stock

Martin M1414 Miter Gear, 20° Pressure Angle, High Carbon Steel, Inch, 0.190\ Face, 3/8\ Bore Diameter, 1\ Pitch Diameter, 1.11\ Outer Diameter, 14 Teeth

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • High carbon steel for tensile strength and hardness.
Check Stock

1 Mod 25T Steel Pinion Gear 1M25T Motor Spur Gear Bore 8mm Outer Diameter 27mm (Bore 8mm)

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
  • High carbon steel for tensile strength and hardness.
Check Stock

Martin TS2020 Spur Gear, 20° Pressure Angle, High Carbon Steel, Inch, 20 Pitch, 1/2\ Bore, 1.1\ OD, 0.500\ Face Width, 20 Teeth

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
  • Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles.
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
  • High carbon steel for tensile strength and hardness.
Check Stock

Martin S1215 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 12 Pitch, 5/8\ Bore, 1.417\ OD, 0.750\ Face Width, 15 Teeth

  • Transmits torque between parallel shafts to provide rotational power to another part of a motorized system.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision.
  • High carbon steel for tensile strength and hardness.
Check Stock

FUNSUEI 30 PCS 3/8 Inch Stainless Steel Angle Beveled Washer 30 Degree Beveled Washer Angle Beveled Washer for 1/8 Inch 5/32 Inch 3/16 Inch Cable Railing Kit

  • MADE OF 316 STAINLESS STEEL - These 30-degree stainless steel angled washers are made of thickened 316 stainless steel, which are corrosion-resistant, rust-proof, high in tensile strength and fatigue strength.They can withstand extreme weather..
  • PACKAGE CONTENT AND SIZE - The package contains 30 pieces of high-quality stainless steel angle beveled washers. These slant washers have an inside diameter of 3/8 inch and an outside diameter of 5/8 inch, and suitable for cable railing kits less than 3/8 inch in diameter, such as 1/8 inch, 5/32 inch, and 3/16 inch..
  • STAIR END USE - The angle beveled washers are used to connect the end posts with offset holes or inclined angles on the stair handrails, and are used together with the handrail kit and threaded terminals to adjust the alignment of other nut fittings and tensioned stainless steel cables..
  • AVAILABLE FOR - These beveled washers are suitable for indoor or outdoor cable railing projects, and can be widely used in gardens, stairs, corridors, deck railings and so on..
  • DAY RETURN SERVICE - We will answer product questions and after-sales questions for you within 24 hours. If you are not satisfied with the angle-beveled washer for any reason, you will get a full refund. We promise a 30-day money-back, complet....
Check Stock

Riverruns Fly Tying Vise

  • ...y fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Heavy Duty 4 Ton 8800 lb Snatch Block Recover Winch Pulley Snatch Block for Winches Double Winch Capacity

  • Fits up to 5/16" winch wire rope. No disassembly required: the pulley swivels open to accept line. Fast attachment: 3" holes. Measures: 10-1/4" x 5"..
  • Load tested to 8818 lb (4 Ton), 3/16" thick high tensile strength steel pulley wheel with black powder-coated, smooth pulleys and quiet if pulled on-axis..
  • When you need your winch to perform powerfully, this snatch block is your go-to accessory, allows better angles during difficult pulls. Winch pulley block feature is prevent the cable from bunching up on one side of the drum during angled pulls and can also double your pulling power..
  • Winching with this snatch block pulley can also reduce amp load and prevents winch overheating, increases and preserves winch motor life..
  • Double the pulling capacity of your ATV/UTV/Truck winch. Use for towing, climbing, warehouse, home and industrial uses..
Check Stock

Wilton B.A.S.H 30\ Sledge Hammer, 14 Lb (21430)

  • High tensile steel rod - the handle consists of a high tensile spring steel rod, which is encased in a high impact resistant co-polymer material making it unbreakable with superior durability.
  • Positive locking plate - the innovative locking plate design ensures that our heads will never separate from the handle.
  • High impact co-polymer - the co-polymer material has been specially formulated to meet the rigorous requirements of every type of environment.
  • Ergonomic shape and thickened boss - the new shock absorbing, non-slip handle provides less recoil which reduces fatigue and the risk of injury.
  • Steel reinforced lanyard hole - safely secures hammer to wrist or stationary object.
Check Stock