Reviews High Speed Cylinder

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

ZUQIEE Paint Thickness Tester, 0.0mm~2.0mm, 0mil~80mil Mini Paint Thickness Tester LCD Digital Display Car Coating Gauge Meter Mesuring Instrument for Fe/NFe with Measuring

  • Single line and double cylinder,synchroized operation,auto at timing point..
  • The cylinder adopts high quality hyaline organic glass..
  • LCD for the instrument, displaying the preset value and real-time value through time division..
  • The parameters like number of turns and rotating speed can be preset arbitrarily, which provides multiple choices for the experiment..
  • Intelligently control two performance parameters like the rotating speed of cylinder and revolutions..
Check Stock

HHIP 8030-8355 Dykem Hi-Spot Blue.55 oz. Tube

  • Single line and double cylinder,synchroized operation,auto at timing point..
  • The cylinder adopts high quality hyaline organic glass..
  • Rotation speed and number of turns can be setted at will..
  • Operation is simple,the control precision is very high..
  • Automatization,auto diagnoses,auto detection,auto alarm..
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

YUEWO Bicycle Motor Kit 80cc 2-Stroke Motorized Bike Kit, DIY Petrol Gasoline Engine Bicycle Conversion Set with Speedometer for 24', 26' and 28' Bikes

  • ...bikes, cruisers, choppers, you can enjoy a faster ride..
  • Convenient Operation: This great design makes bike easy and quick to put together.
  • riders just need to fit the motor to the frame, connect the cables, and fill up the gas tank in order to be ready for their first ride..
  • Powerful Engine: Equipped with the single cylinder, air-cooling, 2-stroke 80cc single cylinder gasoline engine. It adopts first-rate steel material, of great strength and hardness for endurance, which can provide you with a long service life..
  • Ignition Safely: Capacitor discharge ignition method, which is safer and more stable in use. Therefore, this type of ignition will not cause the wear and tear on the contact points when the bike engine is spinning at high speed, which ensures high performance and durability..
  • Faster Speed & Fuel-efficient: Fast and smooth, can speed up to 50km/h. It almost runs as fast as a motorcycle or scooter, making your outdoor trip more convenient. With a 2L fuel tank and a fuel-efficient single cylinder gas engine, your motorcycle can have better endurance to support long distance riding..
Check Stock

Niome 100cc 2-Stroke Bicycle Gasoline Engine Air-Cooled Motor Kit for Motorized Bicycle Push Bike Black

  • This Is our 100CC 2-Stroke Bicycle Cycle Gasoline Engine Motor Bike, Which Is Ideal for motorized bicycle..
  • Advantages: using high-quality wear-resistant iron sleeve cylinder, The use of enlarged cylinder head makes the machine have the effect of high speed,....
  • The bicycle gasoline engine can greatly get the bicycle speed up to 60km/h, and it will surely be your excellent helper..
  • It fits most bikes only if the diameter of the fork is within 31mm. This bike motor kit comes with everything that you will need, except gas and oil..
  • You will be able to stop or start the engine as you ride..
Check Stock

Niome 100cc 2-Stroke Bicycle Gasoline Engine Air-Cooled Motor Kit for Motorized Bicycle Push Bike Silver

  • This Is our 100CC 2-Stroke Bicycle Cycle Gasoline Engine Motor Bike, Which Is Ideal for motorized bicycle..
  • Advantages: using high-quality wear-resistant iron sleeve cylinder, The use of enlarged cylinder head makes the machine have the effect of high speed,....
  • The bicycle gasoline engine can greatly get the bicycle speed up to 60km/h, and it will surely be your excellent helper..
  • It fits most bikes only if the diameter of the fork is within 31mm. This bike motor kit comes with everything that you will need, except gas and oil..
  • You will be able to stop or start the engine as you ride..
Check Stock

Enerpac P-39 Single Speed Steel Hand Pump

  • High-pressure hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately).
  • Advances and releases a single-acting cylinder.
  • Maximum operating pressure of 10,000 pounds per square inch (psi).
  • Single-speed pump for applications with a constantly applied load.
  • Internal pressure relief valve helps prevent pump overload.
Check Stock