Reviews High Rpm Motor

INDUSTRIAL SEWING MACHINE MOTORS HIGH SPEED CLUTCH MOTOR

  • Industrial High Speed Clutch Motor Watts: 400 Watts & 550 Watts available Power: 110 Volts Rotation: Bi-directional RPM: 3450 (High Speed Motor) Shaft: AMCO Shaft Weight: Approximately 42 Lbs Available Pulleys: 630, 632, 634 Hardware & Belt Cover included.
Check Stock

3450RPM 5HP Air Compressor Motor P56 Frame Single Phase Motor for 208-230 Volts Electric Air Compressor Motor

  • ❤【Great Function】--High working efficiency. The maximum speed at which the compressor motor 56 can run is 3450RPM, which greatly improves the efficiency of the work and saves your working time..
  • ❤【Long service life】--The air compressor motor is designed with multiple heat dissipation holes with good heat dissipation performance, which can quickly dissipate heat, prevent the machine from being damaged by overheating, and prolong the service life of the motor.
  • ❤【Premium Quality】--The housing and mounting bracket are made of high quality steel, which can well protect the motor from the external environment, ensure the stability and durability of the motor, and prevent the bracket from being unstable and dropping the motor..
  • ❤【Buy Confidence】-- For any reason you're not completely satisfied. Please feel free to contact us, we will solve the problem for you at the first time. Buy it with confidence!.
Check Stock

ARCTIC ACFAN00133A P12 PWM (Black/Transparent) - Pressure-Optimised 120 mm Fan with PWM

  • OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure.
  • 200 TO 1800 RPM REGULATED VIA PWM: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is given when needed.
  • EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance.
  • EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature.
  • TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.
Check Stock

9TRADING 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR V PUMP 5HP - 5.5HP ELECTRIC MOTOR

  • 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR V PUMP 5HP - 5.5HP ELECTRIC MOTOR.
  • 5 to 5.5 HP electric motor , Gas motor up to 9hp , Rated pressure: 145 PSI , Pump speed: 655 RPM to 930 RPM.
  • Air Delivery (@ 655 RPM) , 12.1 SCFM @ 40 PSI , 11.5 SCFM @ 90 PSI.
  • Air Delivery (@ 930 RPM) , 17.5 SCFM @ 40 PSI , 15.2 SCFM @ 90 PSI.
  • Flywheel: 14-1/2'' with dual V-groove (A-1600belt). Outlet 1" 16unf. Proven belt driven design for excellent compression & smooth running. Two mufflers with two high efficiency intake filters. Oil viewing window and drain plug. Ball bearing check valve..
Check Stock

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.0-HP (DWE4517) , Yellow

  • High power 4 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load.
  • Epoxy coated field and armature of the metal grinder provide long service life against abrasion from airborne debris.
  • DEWALT angle grinder comes with a low-profile gearcase allowing for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 2-position side handle provides improved ergonomics for specific applications.
  • 8,500 rpm provides optimal material removal with 7-inch grinding wheels.
  • Brush window allows for quick brush replacement.
  • High power 4 HP (maximum motor HP) 8,500 rpm motor.
  • Low profile gear case allows for work in tight areas.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed.
Check Stock

Gentle Typhoon Performance Radiator Fan - 1150rpm, 37cfm - Black Edition (D1225C12B5AP-71)

  • OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure.
  • 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed.
  • EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance.
  • EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature.
  • TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.
Check Stock

ARCTIC P12 PWM - 120 mm Case Fan with PWM Pressure-optimised Very Quiet Motor Computer Fan Speed 200-1800 RPM - Black

  • OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static....
  • 200 TO 1800 RPM REGULATED VIA PWM: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while....
  • EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising....
  • EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life....
  • TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.
Check Stock

DEWALT Bench Grinder, 8-Inch (DW758)

  • 3/4 HP induction motor of the bench grinder provides superior power for industrial grinding applications.
  • Rugged cast iron base and motor housing of the 8-inch bench grinder provide durability and prolonged life.
  • Table grinder motor runs at 3,600 rpm for high-speed material removal.
  • Precision-machined aluminum tool rests allow the user to accurately position work.
  • Rear exhaust ports in wheel guards for smoother operation.
  • 12-1/2-inch distance between wheels for larger and longer grinding applications.
  • 3/4 hp induction motor provides superior power for industrial grinding applications.
  • Rugged cast iron base and motor housing provide durability and prolonged life.
  • Motor runs at 3,600 rpm for high speed material removal.
Check Stock

DEWALT Bench Grinder, 6-Inch (DW756)

  • Powerful 5/8 HP induction motor of the bench grinder is made for heavy-duty grinding operations.
  • Industrial cast iron base and motor housing of the 6-inch bench grinder provide durability and prolong life.
  • Table grinder motor runs at 3,450 rpm for high-speed material removal.
  • Precision-machined aluminum tool rests allow the user to accurately position work.
  • Rear exhaust ports in wheel guards for smoother operation.
  • 12-1/2-inch distance between wheels for longer and larger grinding applications.
  • Powerful 5/8 hp induction motor for heavy-duty grinding operations.
  • Industrial cast iron base and motor housing provide durability and prolong life.
  • Motor runs at 3,450 rpm for high speed material removal.
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock