Reviews High Pressure Hydraulic Hose Crimper

Mastercool Blue 71500-A Hydra-Krimp AC Hose Crimper,Black

  • ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
  • IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
  • HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
  • MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
  • EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.
Check Stock

Hydraulic Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool (SK8056)

  • This A/C hose crimper set is made of aluminum alloy material to ensure durability. The stamper hardness can reached 53 HRC, which can make the crimping effect better..
  • It has complete dies for the most common sized hoses and fiitings, covering hose sizes #6, #8, #10, #12 and reduced barrier #8, #10 and #12. The dies can be snapped quickly into the press fixture requiring no pins or screws..
  • Applicable for bead locking fitting. The crimping tool has a base that can be mounted to a bench for easy use,or the base can be held by any vise.
  • The A/C hose crimper set is an one-person operation, saving your time and energy. It is light-weight and compact, suitable for narrow space. The pressure of hydraulic repair tool can not exceed 40MPa, it only use for aluminum material..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Muzata 45KN Upgraded Custom Hydraulic Hand Crimper Tool for 1/8\ Stainless Steel Cable Railing Kit Hardware Wire Rope Swaging 1Pair Dies with Wire Cable Cutter CR09 CK12, CT1

  • Custom Designed for Stainless Steel -- This hydraulic crimper tool is forged and custom-designed to provide 45KN of crimping force, making it perfect for crimping the stainless steel cable railing kits that require more strength and power. The blade of the cable cutter CR12 is quite sharp and durable. It can make exact and clean cuts up to 5/32" stainless steel cable. Package includes: 1pc hydraulic crimper, 1pair of 1/8'' crimping dies, 1pc cable cutter.
  • Simple to Use -- The crimper is designed with an oil switch knob to control the pressure when you swage. The comfortable ergonomic cushioned handle makes it easy to grip and control. Please note that the knob requires an excess of power to be fully tightened. When you find the crimper could not provide enough pressure, please check the knob and make sure it is fully tightened or need further tightening up.
  • Wide Applications -- This Muzata crimper CR09 fits 1/8" cable railing kits. It also matches regular crimping dies to crimp aluminum ferrules or copper products. We Have Upgraded This Crimper to Resolve the Problems Like Broken Head or Leaking Oil after Repeated Crimping. If You Encounter Situations Like This, Please Reach Us.
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to h....
Check Stock

10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool 9 Dies Crimping wires Crimper

  • Design: C-type head, easy to change mold and fixed line position Hydraulic.
  • Efficiency: Hydraulic crimping machine is much easier than hand crimping, higher efficiency, less strength.
  • Hydraulic Design: Provide 10 tons of maximum pressure relay hydraulic mechanism, can easily rotate crimp wire.
  • Safety: Quick release of on/off knob, when the pressure reaches the maximum pressure of the valve, automatic release to prevent overpressure.
  • Compatibility: 10 Ton hydraulic wire crimper features 9 sets of dies for providing large crimping range from 4 to 70 square millimeters, ideal for meeting your different crimping needs.
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

Muzata Hydraulic Wire Terminal Crimper Swager Battery Cable Lug Crimping Swaging Tool with 9 Pairs Dies,Up to 45 Ton and Stainless Steel Cable Cutter CT11

  • Multiple Specification - This hydraulic crimper tool is forged and custom-designed to provide maximum crimping force 45 tons, crimps 12 AWG to 2/0 AWG....
  • Wide Applications - This Hydraulic Crimper set can only crimp aluminum or copper products. But it can also crimp 1/8" stainless steel cable railing....
  • Simple to Use - The crimper is designed with a pressure release system to let you know when the swaging process is complete. The comfortable ergonomic....
  • MetalBudget system - This product belongs to the pre-designed MetalBudget cable railing system, in which we have planned everything you need for a....
  • Free design service - If you are a beginner or not sure about how to do it. Please reach us by clicking "by Muzata" below the golden button. Our....
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock