Reviews High Precision 3d Printer Nozzle

3D Printer Nozzle Cleaning Kit - 13 Pieces 3D Print Tools 0.4mm Pin and Tweezers with Stainless Steel Wire Brush

  • Function: 3D printer accessories is perfect for removing the blockage with high precision and is also suitable for the general maintenance of the....
  • Compatibility: These 3D printer tool kit are compatible with most popular 3D printers, fit most 3D printers nozzles.
  • Uses: 1. Before use the 3D printer cleaning kit, it is recommended to heat the nozzle to 200 degrees or above (pay attention to prevent scalding).
  • Material: High quality stainless steel, the pin tip is smooth and sharp with high strength and toughness, suitable for mild maintenance of nozzle and....
  • Package contents: you will receive 10 pieces of stainless steel nozzle cleaning pins, 1 storage box, 1 copper wire cleaning brush, 2 pieces of....
Check Stock

Tattoos

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your h....
Check Stock

The Cheap Detective

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your h....
Check Stock

Introduction to Play Analysis

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your h....
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle w....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ...e is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
  • And the supporting tools make it more convenient for you to install and save your time.
  • High precision: the inner wall of the 3D printing nozzle is smooth and no burrs, with chamfering design to reduce the resistance of consumables, and its viscosity coefficient is small, so the diameter error of the nozzle is small, providing you with accurate and smooth extrusion.
  • The lettering on the surface allows you to clearly distinguish and use.
Check Stock

SIQUK 33 Pcs 3D Printer Nozzle Cleaning Tools Kit 30 Pcs 0.15mm 0.25mm 0.35mm 0.4mm 0.5mm Cleaning Needles 2 Pcs Tweezers and 1 Pc Cleaning Cloth

  • Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use....
  • Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist.
  • Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap.
  • Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep....
  • Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece....
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

  • Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
  • a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
  • Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
  • Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..
Check Stock

Creality 3D Ender 7 3D Printer Core-XY Structure 250mm/s High-Speed Printing All Metal Dual Gear Extruder Build Volume 9.8in(L) x9.8in(W) x11.8in(H)/250x250x300mm (Ender 7 Black)

  • 1.High-speed printing, invigorating power:The Creality Ender 7 3D printer breakout in printing speed, up to 250 mm/s, 5 times faster than ordinary printers,enjoy instant high-speed printing while maintaining the same molding precision quality..
  • 2.Linear rail, higher precision:Utilizing linear guide technology to reduce movement resistance to a lower level, greatly improve printing speed and high precision positioning, and yet comes with similar stabl high-speed movement..
  • 3.Linear Rail & Core-XY Structure Offer a Higher Precision: Ender-7 utilizing linear rail technology to reduce movement resistance to a lower level, high precision positioning, and yet comes with high-speed stable movement.
  • Core-XY structure, dual motors running parallelly with coordinated operations, faster speed, and higher precision..
  • 4.Smooth discharge and stable feeding:Ender 7 customized large melt pool nozzle ensuring smooth discharge, all-metal dual gear extruder for stable feeding.Make the printer maintain a fast and smooth discharge performance in high-speed work..
  • 5.Professional after-sales and quick response: We have a professional technical team of 100+ staffs, and all product questions are directly replies by our technical team.We provide 24/7/365 after-sales service. If y....
Check Stock