Reviews High Lift Jack Accessories

Lifting Jack Pad for Tesla Model 3/Y/S/X, 2016-2023 Upgraded Tesla Jack Rubber Pad Adapter Tool with Storage Box,Jack Pucks Tesla Accessories Protects Battery & Chassis (4 PCS)

  • 【Custom-Designed for Tesla】: One-to-one specifically designed according to the original car,Fit 2016 2017 2018 2019 2020 2021 2022 2023Tesla model 3/Y/S/X.
  • 【Battery & Chassis Protection】: Our tesla jack pad has a 25mm post that can fixed position and then allows you to avoid accidental jacking to other location of original car , protect battery, chassis and paint from damage..
  • 【High-Quality Material】 :Made of wear-resistant & durable rubber material which can take a cushioning effect while using, this tesla accessories 2023 can ensure safe raising and lifting of the vehicle..
  • 【Convenient Storage & Easy to Use】: Come with a storage box which can keep the tesla lift pucks very easy to store and use - just put this 2023 tesla pucks into the vehicle jack tip hole then place the jack below it..
  • 【A Must Have For Tesla】 :Our jack lift pads is exactly matches the Tesla chassis,so that they can be used with floor jack or 2-post lift, A good assistant for Tesla owners or the auto repair shop..
Check Stock

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

BUNKER INDUST Offroad High Lift Jack with Pair Traction Board Mate,48" FarmJack with Sand Mud Snow Track Mat Board,4x4 4WD Offroad Tire Recovery Kit for Car Truck Jeep ATV SUV UTV

  • 【Heavy Duty All-Cast Construction Design】The High Lift Offroad Jack 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.The center of the Traction mat is specially designed with a jack base for emergency work, compatible with all jack.
  • 【High Quality Material】Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.The traction mat is made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon.
  • 【Adjustable High Lift Jack】With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.The traction mat is 10 tons capacity on flat ground.
Check Stock

BUNKER INDUST Farm Jack 48" with Jack Base Mate,High Lift Tire Jack Stand Plate Offroad 4x4 Sand Mud Snow Recovery Kit for Car Truck Jeep ATV SUV UTV

  • 【Heavy Duty All-Cast Construction Design】--The High Lift Farm Jack 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.
  • 【High Quality Material】--Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.Lifting jack base is rugged construction with durable ABS materials for strong strength and long durability.
  • 【Adjustable Farm Jack】--With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
  • 【Lift your 4WD out of any Situation】--High Lift Farm Jack 48" with jack base is more professional and better for off-road travelling. Li....
Check Stock

Drywall Lift Panel 11' Lift Drywall Panel Hoist,Jack Lifter Jack Rolling Caster Wheel Drywall Lift Construction Tools

  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Drywall Panel Hoist is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster.
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift.
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Drywall Panel Hoist does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel.
  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Drywall Panel Hoist ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoi....
Check Stock

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2\ to 16-1/2\ Lifting Range Portable Hydraulic Jack with Carrying Case

  • [HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars..
  • [DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift)..
  • [WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack to lift cars. It allows the hydraulic jack to be adjusted to accommodate desired work height. The diameter of the top is 0.8 inches..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 ....
Check Stock

OTC 1540 4-Ton Capacity Fork Lift Jack

  • OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches.
  • Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
  • Jack features include high-quality seals and high-strength steel construction.
  • 30 inch long handle, with stop, makes for easy maneuverability around the shop or workspace.
  • Rugged construction and high-grade materials ensure quality performance over the lifetime of the jack.
Check Stock

3 Tons Aluminum Racing Floor Jack With Rapid Pump

  • Lift height of 3-1/4 in. to 20 in., ideal for low-profile vehicles to trucks and SUVs.
  • Ball bearing premium rear swivel casters for 360° mobility.
  • Rotating, removable jack saddle adapts quickly to lift accessories.
Check Stock

3 ton Steel Heavy Duty Floor Jack with Rapid Pump - Black

  • Lift height of 5 in. to 18-1/4 in., ideal for low-profile vehicles to trucks and SUVs.
  • Ball bearing premium rear swivel casters for 360° mobility.
  • Rotating, removable jack saddle adapts quickly to lift accessories.
Check Stock

3 ton Steel Heavy Duty Floor Jack with Rapid Pump - Orange

  • Lift height of 5 in. to 18-1/4 in., ideal for low-profile vehicles to trucks and SUVs.
  • Ball bearing premium rear swivel casters for 360° mobility.
  • Rotating, removable jack saddle adapts quickly to lift accessories.
Check Stock