Reviews High Flow External Fuel Pumps

Current USA eFlux DC Flow Pump with Flow Control 3170 GPH | Ultra Quiet Submerisble or External Installation | Safe for Saltwater & Freshwater Systems

  • ADJUSTABLE FLOW- Unlike traditional AC water pumps, eFlux flow pumps are DC powered and completely controllable. Simply turn the dial to adjust the....
  • SUBMERISBLE or EXTERNAL- Safe for saltwater or freshwater systems, eFlux DC flow pumps can be installed submersible or external (inline). Quick couple....
  • INCREDIBLY EASY- A cinch to install, eFlux Flow pumps have a very small footprint, allowing them to fit into even smaller sumps and tight spaces. High....
  • ENERGY SAVER- eFlux controllable DC flow pumps efficiently produce strong water flow with high pressure. Featuring a sealed DC motor and magnetic....
  • 30 DAY GUARANTEE-We are so sure you’ll be happy with your purchase that we offer a “30-Day Money-Back Guarantee” to ensure customer satisfaction....
Check Stock

MOSTPLUS – GSL392 – Universal 255 LPH External High Pressure Fuel Pump – 6AN Fittings Kit

  • 【Package includes & OE】- 1 x 255LPH Fuel Pump.
  • 2 x Electrical Connections & 2 x Starlock Washers.
  • 2 x Mounting Clamps & 1 x Mounting Cushion.
  • 【Features】- Flow: 255LPH at 43PSI & 12V.
  • Operating Pressure: 35-120 PSI (final fuel pressure set by regulator).
  • 【High Quality】- MOSTPLUS fuel pumps are made of materials that meet OE standards to enhance durability and extend service life.
  • 【Installation】- Inline/ External (Mounts Outside of Tank).
  • 【NOTE】- Before Purchasing to Make Sure this Parts will Fits on your Vehicle and check the Fitment Details.
Check Stock

EVIL ENERGY 50mm car Oil/Fuel/Gas Pump Mounting Bracket Single Filter Clamp Cradle Black

  • Single Bosch External Fuel Pumps Bracket.
  • Type:Anodized Billet Aluminum Fuel Pump Mounting Bracket.
  • Keep your engine bay looking stylish and clean, with this new clamp designed for fuel filters and fuel pumps. filters and fuel pumps..
  • Universal ,But Pay Attention To Size ,Pleae. professional installation is recommended..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....
Check Stock

Delphi FG1371 Fuel Module

  • Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation.
  • Where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge.
  • Delphi fuel pump assemblies are built with OE-validated parts and include OEM-grade wiring, electrical connectors and level sensor assemblies that deliver increased performance, durability and reliability over other aftermarket fuel pumps.
Check Stock

Aeromotive 11186 In-Line Brushless 5.0 Gear External Fuel Pump with Mounting Feet, 1 Pack

  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • Supports naturally aspirated engines up to 3400 HP with EFI, up to 3600 HP carbureted and forced induction up to 2600 HP with EFI and up to 2700 HP carbureted.
  • Capable of 90-psi continuous operating pressure, 150 psi peak, base plus boost.
  • EFI rated flow of 1, 700 lbs./hour at 40 psi, 13.5 Volts.
  • carb rated flow of 1, 850 lbs./hour at 9 psi, 13.5 Volts.
  • Reduced current draw at higher, EFI pressures.
  • lighter than the traditional external mount pumps.
  • extended service life in methanol and ethanol.
  • Pressure regulator not included (sold separately) - for EFI applications use regulator P/N 13134 or P/N 13110, for carbureted applications use regulator P/N 13202 or P/N 13212.
Check Stock

Carter P60430 In-Line Electric Fuel Pump

  • Carter Fuel Systems universal fit Rotary vane pumps are internally regulated, offer a free flow design with no points to burn out or shaft seals to leak.
  • High quality pump provides factory specified fuel pressure and flow rate.
  • OE matched electrical connections and fuel outlet position on pump ease installation.
  • Installation hardware included for a simple, hassle free, installation.
Check Stock

Mini Micro Water Priming Gear Pump Dc 3-12v Sinking Pump Waterproof A1

  • ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. This economy pump comes with the standard nozzle cover and is ideal for applications where accessories are already available. Pump only for direct fuel tank mounting..
  • 2-YEAR WARRANTY: Our M-150S GPI fuel transfer pumps come with a 2-year warranty and are UL Listed Motor and CSA Certified. Feel confident in knowing that your fuel pump has been providing longer run times and award-winning performance..
Check Stock

Power Service Diesel Kleen+Cetane Boost 12 oz, Pack of 9

  • Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems.
  • Removes both internal and external deposits on fuel injectors.
  • Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by poor quality Ultra Low Sulfur Diesel (ULSD) fuel.
  • Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends.
Check Stock

GPI M-180S Fuel Transfer Pump, 18 GPM, 12-VDC, Automatic Shut-Off Nozzle, 12' Hose, 18' Power Cord, Adjustable Suction Pipe (110300-2)

  • ...ary gear pump is designed with fewer moving parts, which means less friction and wear on its components. Thus, this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. More operating hours means longer pump life and greater value. When you need reliable performance, GPI’s gear pumps are over-engineered to deliver..
  • DURABLE: Manufactured from high-quality die-cast aluminum, our fuel transfer pump with automatic shut-off nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 18 Gallons per Minute..
  • QUICK INSTALLATION: The innovative spin collar design of our fuel transfer pump makes installation fast and easy! The low-profile design of the pump is meant for permanent mounting on fuel storage tanks..
  • 2-YEAR WARRANTY: GPI’s M-180S fuel transfer pumps come with a 2-year warranty and are UL Listed Motor and CSA Certified. Feel confident in knowing that your American-made fuel pump has been providing longer pump life and....
Check Stock