Reviews High Common Mode Rejection Ratio

Juried Engineering NE5534P NE5534 Low-Noise High-Speed Audio Operational Amplifier IC Op-Amp DIP-8 Breadboard-Friendly (Pack of 5)

The TL081CP JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
Unity-Gain Bandwidth 10 MHz Typ and Wide Supply-Voltage Range ±3 V to ±20 V, Equivalent Input Noise Voltage 3.5 nV/√Hz Typ and High Slew Rate 13 V/µs Typ.
Common-Mode Rejection Ratio 100 dB Typ and Low Harmonic Distortion.
High DC Voltage Gain 100 V/mV Typ and Offset Nulling Capability.
Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 Ω and External Compensation Capability.

Maximum performance radar detector with 360 degrees of complete perimeter protection.
Total laser detection identifies Laser Atlanta Stealth mode,....
Features MMIC (Monolithic Microwave Integrated Circuit), providing maximum sensitivity and range.
Includes Radar Signature ID (RSID), Laser Signature....
Traffic Flow Signal Rejection (TFSR) and 6 filter modes help eliminate alerts from radar based traffic monitoring systems.
3 city modes/highway mode reduces false alerts caused by common X band radar sources such as security systems or door openers.
Auto Dim/Dark mode automaticlly adjusts to changes in lighting.
Includes 12V power cord, windshield bracket kit, hardwire kit, and dash pad.

◆SPECIFICATION - Rated Voltage: 125/250V.
◆HIGH QUALITY - There is a single bipolar single phase power supply filter with good common mode and differential mode rejection characteristics.
◆APPLICATION - The power filter can suppress continuous and intermittent pulse interference, It is widely used in most digital devices (especially switching power supplies) and white goods with inverter and inverter for control system, such treadmills and other fields.
◆EASY TO USE - The emi filter is universal, compact and easy to install.

DS18 DBP-1 digital bass reconstruction processor - enhance the lower frequencies on all types of music and reproduction Formats.
Max bass control with dash mount remote control for pfm subsonic filter & bass level control.
Balanced inputs, bass output control with PWM high head room power supply, selectable grounding mode (balanced or unbalanced).
Output level: 13.5 volts peak, maximum input level: 15V RMS, frequency response: 10Hz - 100Khz.
Thd: 0.003%, s/openings ratio: 130Db, balanced input noise rejection: 60 dB.

Ultra-compact, high density aluminum alloy chassis provides superior thermal stability | Four layer, glass epoxy circuit board for enhanced performance and reliability | Full Range Class D amplifier technology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level....

Lower power consumption than the same data transfer rate when the traditional optical isolator 1/10, the minimum operating current 0.8mA..
Performance higher timing accuracy, transient common mode rejection, the degree of matching between channels are better than the traditional optical isolator..
The smaller the integration, the printed circuit board (PCB) area of 40% of the traditional photoelectric isolator..
Application: RS-232/RS-422/RS-485 transceiver isolation.

Number of Outlets: 6, Receptacle Style: NEMA 5-15R.
Input: Nominal Input, Voltage: 120V,Input Frequency: 50/60 Hz.
Surge Protection and Filtering - Surge energy rating: 1080 Joules, EMI/RFI Noise rejection (100 kHz to 10 MHz): 40 dB Peak Current Common Mode: 72....
Operating Environment: 0 - 45°C, Operating Relative Humidity: 0 - 95%, Operating Elevation: 0-3000 meters, Storage Temperature: -5 - 45°C, Storage....
Regulatory Approvals: ETL, UL 1449, Standard Warranty: Lifetime.

Low input current requirements – 0.5mA.
High current transfer ratio – 2000% typical.
NOTE:Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

HIGH-PERFORMANCE VOCAL MICROPHONE - The SM48 is a dynamic cardioid mic that delivers crisp and clear sound for vocals and spoken-word applications..
RUGGED CONSTRUCTION - With its shock-mounted cartridge, steel mesh grille, and tough metal construction, the SM48 is built to withstand the rigors of stage and studio use..
IMPRESSIVE SIGNAL-TO-NOISE RATIO - The neodymium magnet and carefully tuned frequency response of the SM48 provide a high signal-to-noise ratio, making it an excellent choise for recording and live sound reinforcement..
GREAT OFF-AXIS REJECTION - The cardioid polar pattern of the SM48 ensures excellent off-axis rejection reducing unwanted background noise and feedback..
BASS ROLLOFF AND MIDRANGE BOOST - The tailored frequency response of the SM48 features a bass rolloff and midrange boost, providing clear and natural-sounding vocals..

Frequency response shaped specifically for kick drums and bass instruments.
Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum.
Studio quality performance, even a high sound pressure levels.
Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise.
Hardened steel mesh grille that resists wear and abuse.
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.
Neodymium magnet for high signal–to–noise ratio output.
Low sensitivity to varying load impedance.
Drum microphone provides low-frequency bass punch and SPL handling. It includes dynamic locking stand adapter for easy set-up, steel mesh grille for durability, shock mount for sound isolation, and neodymium magnet for high signal-to-noise ratio..