Reviews High Capacity Clamping Tools
BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping
- Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
- Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
- Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
- Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
- and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
- Easily converts to spreader without tools!.
Check StockBESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping
- Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
- Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
- Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
- Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
- and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
- Easily converts to spreader without tools!.
Check StockJORGENSEN 8036 Cabinet Master 36 Inch 90 Degree Parallel Steel Bar Clamp
- These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today.
- This product is easy to use easy to install and highly durable.
- Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar.
- Clamping faces are 3-3/4 inch height and 1-7/8 inch width.
- Ideal for do-it-your-selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types.
- Pony Tools Inc. (founded 1903) is the manufacturer of the bar clamps and they are made with U.S. and foreign parts in our Chicago factory.
Check StockWoodRiver Miter Vise 4-1/4
- Features a 4-1/4" capacity and 1-3/8"-high clamping surface.
- 90° angle, strong clamps - Holes for permanent mounting.
- WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock
O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool
- Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
- Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
- The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
- The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
- There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock
6 Pcs Hand Tool Toggle Latch Clamp, 201B Quick Release Horizontal Toggle Clamp with PVC Non-Slip Hadle, Stainless Steel Toggle Latch for Woodworking, Welding, Mechanical Operations,220 Lbs
- [Corrosion-Resistant High-Quality Materials] Our hand tool toggle clamp is made of stainless steel. The cold-rolled steel surface is electroplated and anti-rust treated, which has high hardness and corrosion resistance..
- [Four-Link Dead Point Structure] The toggle clamp adopts a quick clamping and quick opening structure designed by the four-link dead-point principle, which is flexible and smooth without slipping. Maximum clamping force is 90kgf..
- [Robust and Stable Design] The clamping base is designed with reinforced ribs, which is firmer in use and the clamping is more stable. The adjusting shaft is made of stainless steel with high bearing capacity. 85° bar opening angle, 60° handle opening angle..
- [Comfortable PVC Rubber Sleeve Handle] Our toggle latch use high temperature die-casting PVC handle rubber sleeve, which is non-slip, abrasion resistant and does not hurt your hands, make it easier, comfortable and safer to use manually..
- [Wide Application] The hand tools toggle have the advantages of accurate positioning and fast loading and unloading. They are ideal choices for vehicle manufacturing, electronics, furniture and other industries..
Check Stock
Evolution Metal Cutting Chop Saw with 14-Inch Mild Steel Blade with Universal Adjustable Stand Bundle (2 Items)
- Bundle Includes: Evolution S355CPSL Metal Cutting Chop Saw with 14-Inch Mild Steel Blade and Evolution Power Tools EVOCS2 Universal Adjustable Metal Chop Saw Stand.
- Fast and Secure Clamping: It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. It features a quick-release vise with a robust square-threaded rod for fast and secure clamping. An attachable v-shape block is included for secure clamping of round and square tube.
- Design: The saw’s compact design with a head lock down pin and carry handle makes it easy for transportation. Its chip deflector directs chips away from the operator and reduces cleaning time.
- Steel Vice: It has an accurate and durable cast steel vice with 0 to 45-degree- miter capacity.
- Ergonomics: The S355CPSL has an ergonomic, ambidextrous trigger with a comfortable textured grip. It provides easy blade change with integrated tool storage.
Check StockIRWIN QUICK-GRIP C Clamp, 4-Inch (225104)
- Clamp features a double-rolled thread for faster clamping and increased durability.
- C-clamp has a larger swivel pad to reduce marring on work surfaces and increase stability.
- Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
Check StockWood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning
- 【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
- 【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
- 【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
- 【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
- 【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check StockBessey VAS23 Vario Angle Strap Clamp
- Make difficult frame and furniture clamping easy with the Bessey® Band spanner high-torque clamping system.
- This product is easy to use easy to install and highly durable.
- A retractable 7-meter polyester tensioning band offers exceptional clamping power.
Check Stock
