Reviews Hidden Deck Fastener Gun Driver

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

  • WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
  • EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
  • PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
  • CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Max HN120 PowerLite Concrete Nailer

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

DEWALT Drywall Screw Gun, Variable Speed Reversible, 6.5-Amp (DW276)

  • Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
  • DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
  • The drywall gun has metal gear housing for jobsite durability and increased reliability.
  • Depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
  • Two-finger trigger for increased comfort and ease of use.
  • Excellent ergonomics offers less user fatigue.
Check Stock

DeckWise (Black) Ipe Clip Extreme S Hidden Deck Fasteners, 5/32' Gap, Stainless Steel Black #8x2' Trim-Head Screws for 300 Sq.Ft. of AD and KD Hardwood, Thermal or Composite Decks (525 Bucket)

  • (570) #8×2″ T15 Stainless Steel Screws.
  • Automatically spaces deck boards at 5/32″ (4mm).
  • Manufactured from polyethylene with stainless steel black oxide insert.
  • Reduces fastener tilting during installation improving gap consistency.
  • For use with air/kiln dried hardwood, composite, or PVC decking.
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

  • For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
  • 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock