Reviews Hex Shaft Gear Coupling

BENLIUDH 4 Pcs Universal Joint Shaft Coupling 4mm to 6mm Inner Dia U Joint Coupler with Screws for Motor

  • Material：Universal joint shaft coupling is made of nickel-coated iron，much stronger, wearproof, Long service life。.
  • Dimensions：Inner Diameter: 4mm to 6mm，Outer Diameter: 11mm/0.43”；Height: 24mm/0.94”。.
  • Package Include：4 x universal joint shaft coupling, 1x hex wrench, 8 x fastening screws。.
  • Application: The universal joint is suitable for the use of the straight shaft of the motor, and is suitable for the use of various metals such as model cars, model boats, and robots，It is suitable for various general machinery occasions。.
  • It Can be bent at any angle (rotation angle is 45 degrees), and the universal joint can change the transmission direction at any angle。.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

DGZZI Gear Reduction Motor Holder 1Set Black 37mm DC Geared Motor Mounting L Shaped Bracket with 6mm Hexagonal Coupling and Mounting Screws

  • Wear-resistant and not easy to rust, durable and not easy to bend. Black plating makes it more stylish and chic..
  • The metal motor bracket has mounting holes for easy installation. The precise mounting holes match the M3x6mm screws perfectly, which saves you more installation time..
  • Convenient mounts are suitable for these small motors.Ideal for many hobbies and alternative applications such as model cars and robots.Ideal for 37mm pinion stepper motors..
  • Can be used for 37mm gear motors. Suitable for fixing 37GB, 37GA gearbox..
  • Packaging Includes:1PC 37mm DC gear reducer motor mount,1PC 6mm hexagon coupling,2PCS hex coupling screws,10 sets of mounting screws and nuts..
Check Stock

1/2-13X1 3/4 Hex Rod Coupling Nut 3/4 inch Across Flats Grade 5 Zinc (Pack of 5)

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

Zipbolt Handrail to Newel Post Connector — 13.810 Staircase Railbolt, Banister Post Fastener with 5mm Hex and Wood Plugs, Durable, Easy Installation for Residential and Commercial Use

  • ...NDRAILS TO NEWEL POSTS – Attaching handrails to newel posts is no longer a hassle. The patented UT gear-driven mechanism speeds up handrail to newel post installation by eliminating the tedious steps of conventional techniques. The slipfix railbolt's open channel allows the housing to be dropped directly onto the shaft, eliminating the need for cumbersome nuts and washers..
  • FAST INSTALLATION – Perfect for quickly connecting stairway post joints. Assemble the rail bolt shaft and gear housing in the rail, install the keyhole disc, insert the railbolt and push it downwards, then tighten with the included 5mm hex bit using a screwdriver or cordless drill. NOTE: Impact drivers should not be used when tightening the gear housing..
  • A COMPLETE PACKAGE – The package includes everything you need to attach a handrail to a fixed stairway post. It contains 2 slipfix rail bolts, 2 wood plugs, and 1 hex bit (5mm). Use the instructions on the packaging to guide yourself through the installation process..
  • DURABLE CONSTRUCTION – Made with quality steel for maximum durability, these Zipbolts were created by professionals for residential and commercial use. They provide a solid and stable connection without the frustration of traditional methods..
Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

  • 1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
  • Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
  • Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
  • NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
  • 100% Factory Tested - Will pump water from 100 feet.
Check Stock