Reviews Hex Deck Screws

Starborn Structural H23 Deck Ledger Multi-Purpose Wood Screw 50 4

  • Specifically designed to attach deck ledgers to rim joists.
  • 3/8" Hex washer head for maximum drivability.
  • Tri-Forge Point provides fast start, minimal splitting, and reduced driving torque.
  • Speed-knurl reduces friction on the unthreaded shank for faster installation.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ 50-Pack. ▼ Black stainless steel screws (Hardness class #12.9 + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resti....
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ 100-Pack. ▼ Black stainless steel screws (Hardness class #12.9 + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be rest....
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • ...bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous inspections to ensure they are 304 stainless steel and the right size you want.
  • Hakkin is a professional fasteners seller brand. We will do our best to provide you a pleasure shopping experience..
Check Stock

Glarks 204Pcs M8 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws and Hex Head Screw Bolts with Hex Nuts Flat Washers Lock Washers Assortment Kit

  • ➤[Package Includes]: You'll receive 204pcs M8 screws, nuts and washers in total, which are 17pcs Phillips round head machine screws, 17pcs hex socket head cap screws, 17pcs hex head cap screw bolts, 51pcs hex nuts, 51pcs flat washers and 51pcs lock washers. This set with different types of screws and washers can be applied to various occasions, enough for your daily use..
  • ➤[High Quality Material]: All of our screws, nuts, bolts and washers are made of 304 stainless steel, which features high strength, shiny look, premium rust, corrosion and oxidation resistance, can perform well even in bad environment. This 304 stainless steel set selects elaborately high quality fittings to give you best experience..
  • ➤[Size Details]: Our round head machine screws, hex socket head cap screws and hexagon head bolts are in 4 different sizes: M8 x 15, M8 x 25, M8 x 35, M8 x 40, and come with M8 flat washers, M8 lock washers and M8 hex nuts. This set covers most commonly used size of M8 screws and bolts, will become good helper for you in repairing or replacing work..
  • ➤[Great Workmanship]: These screws and bolts design with high precision, compact and clean thread to achieve tight connection, not easy to fall off and loosen, smooth thread are easy to install withou....
Check Stock

Glarks 368Pcs M6 M8 M10 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws Hex Head Screw Bolts and Hex Nuts with Flat Washers Lock Washers Assortment Kit

  • ➤[Package Includes]: You'll receive 368pcs M6 M8 M10 screws, nuts and washers in total, which are 32pcs Phillips round head machine screws, 28pcs hex socket head cap screws, 32pcs hex head screw bolts, 92pcs hex nuts, 92pcs flat washers and 92pcs lock washers. This set with different types of screws and washers can be applied to various occasions, enough for your daily use..
  • ➤[High Quality Material]: All of our screws, nuts, bolts and washers are made of 304 stainless steel, which features high strength, shiny look, premium rust, corrosion and oxidation resistance, can perform well even in bad environment. This 304 stainless steel set selects elaborately high quality fittings to give you best experience..
  • ➤[Size Details]: Our round head machine screws, hex socket head cap screws and hexagon head bolts are in 8 different sizes: M6 x 16, M6 x 25, M6 x 35, M8 x 25, M8 x 35, M8 x 45, M10 x 30, M10 x 40. Hex socket head cap screws are in 6 different sizes: M6 x 16, M6 x 25, M6 x 35, M8 x 25, M8 x 35, M8 x 45. Flat washers, lock washers and hex nuts are in 3 sizes: M6, M8, M10. This kit covers most used sizes of screws and nuts, will become good helper for you in repairing or replacing work..
  • ➤[Great Workmanship]: These screws and bolts design with hi....
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

Hitachi WH10DFL2 12-Volt Peak Cordless Lithium Ion Impact Driver Kit (Lifetime Tool Warranty)

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Covered by Hitachi's Lifetime Lithium Ion Tool Warranty & 2 Year Lithium Ion battery warranty.
  • Powered by Lithium Ion battery technology for fade-free power and lighter weight than traditional NiCd batteries.
  • 955 inches/pounds of driving torque for heavy applications like tightening carriage bolts, driving lags and sinking deck screws.
  • Tightens and loosens small screws, tapping screws, bolts and nuts.
  • Impressively lightweight at only 2.2 pounds and compact at less than 6 inches in length.
  • Faster impact driving with a no-load speed of up to 2,700 RPM and a 3,200 BPM impact rate.
  • Optimized handle dimensions for a secure grip and ergonomic comfort in all hand sizes.
  • LED light effectively illuminates dark work areas.
  • Quick change 1/4 inches hex chuck for simple bit replacements.
Check Stock

push the nut button

  • ✔ Includes 120 Pcs, 9 Sizes, Hex Socket Button Head Cap Screws: 1/4-20 x 3/8, 1/4-20 x 1/2, 1/4-20 x 5/8, 1/4-20 x 3/4, 1/4-20 x 1, 1/4-20 x 1-1/4,....
  • ✔ Includes 120 Pcs, two types, 1/4-20 Nuts: 60 Pcs ANSI/ASME B18.16.6 Self-Locked Hex Nuts, Nylon Inserted, Self Locking, Loose Unexpected Will NOT....
  • ✔ Includes 120 Pcs Φ1/4 Inches Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
  • ✔ Includes 1 Pcs Hex Key, Hex Size: 5/32", to Drive These Screws Conveniently and Easily..
  • ✔ Material of Screws, Nuts and Washers: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments ✔ Material of hex key:....
Check Stock

Saipe 2pcs Adjustable Screw Depth Screwdriver Bit Holder Magnetic Steel Screwdriver Drywall Bit 1/4 Inch Hex Shank with S2 Phillips 2 Screw Driver Bits

  • Made of Chrome vanadium steel, high hardness and anti-rust, giving you long lasting and maximum durability..
  • The adjustable depth screwdriver bit holder can set screws in straight and to a predetermined depth, allowing for accurate working with drywall screws..
  • Strong magnetic tip can hold the bits and convenient pick-up and retention of screws, work for 1/4x1” Phillips Bits.
  • Versatile Use: Use for deck building, wood framing, installing plywood subfloor, building crates, etc..
  • 1/4" hex shank can be easily fit into power driver, drill and handheld screwdriver. Packaged included: 2pcs Screw Driver Bit Holder with 2pcs PH2 Drywall Insert Bit.
Check Stock