Reviews Helical Head Jointer

JTEX 6-Inch Jointer Knives for Delta 37-372, 37-070, 37-370, 37-371, JT160 Jointer - Set of 2

  • 6-Inch Jointer Knives 37-372 for Delta 37-070, 37-370, 37-371, JT160 Bench Jointer.
  • Made of High Speed Steel for longer cutting life.
  • The blades is highly durable and easy to use. Blades are Single Edge for longer life.
  • Machined locator holes help users align knives on cutter-head during knife change fast and easy.
Check Stock

CRAFTSMAN Benchtop Jointer, 10-Amp (CMEW020)

  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing..
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material.
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives.
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing.
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods.
Check Stock

PORTER-CABLE Benchtop Jointer, Variable Speed, 6-Inch (PC160JT)

  • Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut.
  • Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives.
  • Built-in cutter head lock facilitates knife replacement and adjustment.
  • Extra large table provides ample work support and Surfacing stock up to a full 6" wide.
  • Center mounted fence gives needed support throughout the cut for accurate edge jointingDescriptionPORTER-CABLE PC160JT variable speed 6" jointer features a variable speed range of 6, 000 to 11, 000 RPM and Cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife Cutter head, with Jackscrew knife leveling arrangement and built-in Cutter head Lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing..
Check Stock

FOXBC 4-3/8-Inch Planer Jointer Knives for Sears Craftsman 149.236922 , Harbor Freight 4-1'8\ Jointer Planer

  • 4-3/8" x 7/8" x 5/64" Planer Jointer Knives.
  • Please note: NOT FIT Sears Craftsman Model No. 149.236220, 149.236221, 351.21724 351.217240 113.206400.
  • 4-3/8 Inch Jointer Knives for Sears Craftsman 149.236223 149.236922 149.236993 315.23720 4-1'8" jointer planer.
  • 4-3/8 Inch Jointer Knives for Harbor Freight 4 1/8" jointer planer.
Check Stock

6-1/8\ HSS replacement for vintage Craftsman jointer model 113.206801, pack of 3 jointer knives.

  • 6-1/8" planer blades Standard replacement for Craftsman Jointer Blades 6 1/8 Inch 9-2293 18112.
  • 6-1/8" jointer blades Replacement for Craftsman jointer model 113.206801 and Craftsman 6-Inch jointer 21705.
  • 6-1/8" x 11/16" x 1/8" (L x W x T) jointer blades pack of 3.
  • Specially designed with close tolerance for fast and smooth planing made from higher grade of HSS for longer edge life compared to Regular Blades.
  • We also make Planer knives for Grizzly , Delta , Rockwell , Dewalt , Portercable , Black & Decker and other Planing Machines..
Check Stock

VEVOR Jointers Woodworking 8 Inch Benchtop Jointer 1500W Jointer Planer Heavy Duty 9000 RPM/min Benchtop Planer 6M/min 120 mm Cutting Thickness Wood Jointer Benchtop For Wood Cutting Planer

  • 【PREMIUM QUALITY】- High-quality jointers woodworking equips the full metal workbench. With a maximum cutting width of 8 inches (20.32 cm), No-load speed：9000RPM/min, Power: 1500W, Feeding speed of 6M/min..
  • 【TWO-IN-ONE DESIGN】- Combine a benchtop jointer and a planer in one unit, a two-in-one benchtop jointer can maximize workspace. A crank handle for easy adjustment of the height of cutter head.
  • scale ruler for precise machining, automatic feeding design is available when it becomes a planer..
  • 【CONSIDERATE DESIGN】- The dust exhaust interface can connect to dust collectors for easy cleanup of the flying wood chips to cultivate a clean working environment.
  • This compact design of the jointer planer maximizes space-saving use..
  • 【RELIABILITY & SAFETY】- Equipped with power-off protection electromagnetic switch, the over current protector, can be tripped when the motor is overloaded..
  • 【WIDE APPLICATION】- Benchtop planer is designed for planing of old, weathered, rough and worn wood, and giving it an exceptionally smooth finish. Planers woodworking can be used for planning wood, bamboo, lining nylon, etc..
Check Stock

Vintage Delta Rockwell 6" Jointer Cutter Head Bearings Set of 2, SP-5336 & SP-5337

  • Rockwell,Delta,Milwaukee 6" Jointer Cutter Head Bearings. Set of 2..
  • These bearings are used on 6" jointer models 37-205 and 37-207. They are also used on early model (pre mid 60's) 37-220 6" jointers. Later model 37-220 models used non-extended race bearings that were the same size on both sides..
  • Left Side 15mm ID (d), 35mm OD (D), 11mm wide outer race (B), 12.2mm wide inner race (B1), 12.7mm wide overall.
  • Left Side 17mm ID (d), 40mm OD (D), 12mm wide outer race (B), 13.7mm wide inner race (B1), 14.288mm wide overall.
  • Replaces Rockwell/Delta Part Numbers: Left- SP-5336, 920-08-020-5336, ND-87502.
  • Right Side- SP-5337, 920-08-020-5337 and ND-87503.
Check Stock

EMILYPRO Jointer Knife Setting Jig Metal Bars with Magnets for 4\-8\ Jointer Blades Easy Quick Install - 1pack

  • 【Function】 This jointer knife setting jig is used for easily quickly and accurately install your jointer knifes, let you perfect align your jointer knives when setting the knives..
  • 【Application】This planner knife setting jig is great for 4”-8” Jointer with HSS Knives..
  • 【Design】This planer blade setting jig designed metal bars with 6pcs embedded magnets let it attach to the outfeed table and hold the steel knife in the correct location, no need extra objects to put on it.
  • the metal bar super flat and parallel, the laser cut lines perfect aligned, can accurately getting your knives all aligned and at the same heights..
  • 【User Friendly】The jointer knife setting jig’s metal bar all edges are soften to avoid hurt hand, The surface of the magnets hole all are filled with glue to let it more firmly and have neat look..
  • 【Dimension】Metal square bar L x T: 5-7/8” x 7/16”, max extended width: 6-1/4”.
Check Stock

POWERTEC - 148010X HSS Knives for Delta 6\ Bench Jointer 37-070 - New

  • INCLUDES: (2) Jointer Knives 6" – Premium cutting tools for woodworking applications.
  • JOINTER BLADE COMPATIBILITY: Compatible with Craftsman 21788 | Delta 37-072 37-372 37-070 JT160 | Grizzly G0612 | Porter Cable PC37072 PC160JT | POWERTEC BJ600 | Shop Fox W1814.
  • FEATURES: Each jointer cutting knife possesses mounting holes for easy alignment, along with a single cutting edge with a profile specially designed for smooth and fast cutting action (without tear outs) that consistently delivers high precision and professional looking results.
  • HIGH SPEED STEEL: HSS jointer blades allow you to cut hard woods, boards and other material at higher speeds with hardened sharpness, temperature protection and wear resistance for long term durability.
  • DIMENSIONS: Length 6-1/4" x Width 7/8" x Thickness 1/16".
Check Stock

Woodworking A-Line It Basic Kit With Dial Indicator For Alignment And Calibration Workshop Machinery Like Table Saws Band Saws

  • Quickly Set-Up,Tune Up,And Check The Accuracy Of Your Shop'S Tools With This System.
  • Check Table Saw Blade And Fence Alignment,Arbor And Blade Run-Out,Miter Slot To Blade Squareness,Arbor/Chuck Run-Out,Jointer/Planer Head To Table Parallelism,Jointer/Planer Knife Alignment,Out-Feed Table Alignment,Router/Shaper Spindle Run-Out,Or Any Other Set Up Or Alignment Measurement You Desire.
  • The 1" Capacity Dial Indicator Reads In.001" Increments For Absolute Precision.
  • Self Adjusting Miter Slot Rod With Leveling Screws And Spring Plungers For Perfect Fit In Your Miter Slot.
  • Dial Indicator Mounting Bar Measures 3/4” X 3/4” X 5-1/2”,Miter Slot Rod Measures 3/8” X 3/4" X 6-1/4".
Check Stock