Reviews Heavy duty Weld on Hinges

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

  • What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
  • Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
  • Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
  • These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
  • Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
  • Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
Check Stock

Weld-On Hinges 1Pair

  • Delivered in a thin layer of oil to protect from rust during shipping. This ensures you receive the product at its best state.
Check Stock

Heavy Duty Gate Hinges 5 Inches - 2 Pack Black Iron Door Hinge Barrel Style 450 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 5 inch, barrel diameter is 1 inch, back plate width is 1 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 450 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges.
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Heavy Duty Gate Hinges 7 Inches - 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 7 inch, barrel diameter is 1.25 inch, back plate width is 1.25 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges..
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Bobco Metals 4\ Heavy Duty Weldable Hinges - Steel Butt Hinge Design for Heavy Gates & Doors - Long Lasting - 4\ x 4\ Size - 1/4\ Plate Thickness - 2 lb - 1 Pair

  • Bobco Metals 4" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more..
  • These weldable hinge plate are 1/4" thick and weighs 1 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting..
  • Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier..
  • These steel hinges are uncoated, and are their natural dark grey. They can be painted to match the metal surface to which they are attached..
  • All hinges are packaged with care. Rest assured, your hinges will arrive in....
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Bobco Metals 3\ Heavy Duty Weldable Hinges - Steel Butt Hinge Design for Heavy Gates & Doors - Long Lasting - Corrosion & Rust Resistant - 1 Pair

  • Bobco Metals 3" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more..
  • These weldable hinge plates are 1/4" thick and weighs 0.25 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting..
  • Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier..
  • These steel hinges are uncoated, and are their natural dark grey. They can be painted to match the metal surface to which they are attached..
  • All hinges are packaged with care. Rest assured, your hinges will arrive in perfect condition and ready to use out of the box!.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

3 inch Steel Bullet Hinge with Zerk Grease Fitting and Bushing - Weld on for BBQ Smoker Pit Lid Door Tailgate Gate or Fence

  • ✅ 【3 INCH SIZE】3" weld on bullet hinge for BBQ Smoker pit doors and lids, truck tailgates, fences, gates, etc..
  • ✅ 【INCLUDES】Steel with zerk fitting (grease fitting) - Includes Brass Bushing.
  • ✅ 【PREMIUM QUALITY】Heavy duty housing and thick steel center pin.
  • ✅ 【WELD ON】Use 2 or more barrel hinges per application..
  • ✅ 【MULTIPLE USES】BBQ smokers, gates, automotive tailgates, etc..
Check Stock

Dump Trailer Tailgate Hinges for Door Gate Body Hinge with Grease Zerk Weld-on Heavy Duty Greaseable Dump Trucks Hinge Fitting Fold Down Gate/Loading Ramp on Flat Deck Trailer or BBQ Smoker 2

  • ✅【Better Choice】: Dump trailer hinges will worked perfect for your dump trailer build or swing arm for a truck camper or storage container. Very heavy duty and the grease fitting alow you to ensure they continue to operate smoothly. you will Love that they are greaseable and we have greased them..
  • ✅【Production】: The design is a cost effective way for maintaining or extend the life of your expensive .The short leaf formed hinge strap fits for built/repair a trailer tipper and used them for the tipping body.A third of the price of a trailer dealer,saving you money on trailer tipper repairs and replacements..
  • ✅【Premium Materials】：Awesome and heavy duty trailer hinges for rear gate perfect for built a trailer tipper and used them for the tipping body and big or small BBQ smoker's.Even only needed two for trailer sized smoker grill..
  • ✅【Installation】: Installation of these hinges is a breeze,simply weld them onto your trailer,truck,BBQ smoker or whichever equipment you need them for. The hinge is designed to be welded onto the surface, providing a strong and secure attachment that won't come loose even with heavy use..
  • ✅【Quality Guarantee】: If Dump Trailer Tailgate Hinges for bed frame slat has any quality problem, please feel f....
Check Stock