Reviews Heavy duty Structural Bolt Kit

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

OMT 24pcs Brake Caliper Tool Heavy Duty Brake Caliper Compression Tool Caliper Piston Tool for Brake Pad Replacement Reset with Thrust Bolt Assemblies Retaining Plates 18 Disc Adapters

  • UNIVERSAL COMPATIBILITY: This 24-piece brake caliper tool set by Orion Motor Tech includes 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters to fit hundreds of domestic and import vehicle makes and models and give you everything you need to service your brake pads.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle, then simply turn to rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt assembly easily hold your drive keys and adapters in place during use.
  • HEAVY-DUTY MATERIAL: This set of brake caliper compression tool is crafted from structural-grade 45# steel with industry-leading technology to offer superior strength and durability.
  • the protective sandblasted surface further enhances its wear and corrosion resistance.
  • CONVENIENT STORAGE: The blow-molded ABS case of this brake piston compressor tool kit comes with pre-sized and labeled slots for easy organization, storage, and transport between jobs.
  • SATISFACTION GUARANTEED: This disc brake caliper tool set is backed with its strong warranty and Orion Motor Tech's usual friendly 24/7 customer service, ensuring that you'll be able to use this kit for years to come!.
Check Stock

Hooke Road F150 Offroad Steel Front Bumper w/Winch Plate Compatible with Ford F-150 2004 2005 2006 2007 2008 Pickup Truck

  • 3-piece design full-width front bumper for Ford F150 2004 2005 2006 2007 2008. Not Compatible with Factory Sensors. Easy bolt-on installation. No drilling required..
  • Rugged off-road look. Fully-welded D-Ring mounts with 4.75-ton capacity. Built-in winch plate rated up to 12000 lbs..
  • Bumper weight about 145 lbs. Heavy-duty 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structural connection plates and winch plate..
  • Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 2 packages. Included Front bumper assembly.
Check Stock

vikofan 8 Pcs Workbench Bracket Kit Sturdy Steel Angle Brackets Multi-Angle Joint Fastener Shelf Fit for Desk Edge & Box & Wood Beam with Screws

  • The workbench bracket can help you work out of building your own work bench..
  • Material: The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.Coated with green powder.(Point of improvement）.
  • Design:The workbench brackets ensure that the legs and top will be parallel, plumb and square..
  • Package Included:8 Pcs Workbench Bracket（8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.）,Screws and Instruction..
  • Easy to install:Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions).
Check Stock

Glarks Heavy Duty Gun Wall Anchor Metal Setting Tool with Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Cavity Anchor Plasterboard Fixing

  • ☛ Product Type: High quality heavy duty gun with molly bolt hollow wall anchor screws assortment kit..
  • ☛ Package: In this kit, it include a heavy duty gun with 5 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm total 18pcs molly bolt packed in a durable box, convenient for your use and storage..
  • ☛ Meterial: The gun is made of solid metal with non-slip rubber grips and slip guard. molly bolts are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ☛ Feature: Heavy-duty gun used for setting cavity wall fixings into hollow stud walls accurately and quickly, hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ☛ Application: Perfect for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • ...nt ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

8477 Piece Grade 5 COARSE ZINC Plated Bolt Assortment. Bolt, NUT, Washer and LOCKNUT. Comes with (2) 40 Hole Durham Bins. 1/4-3/4

  • What You Will Get: A variety of quantity to suit your needs, 197PCS heavy duty hex bolts +90PCS hex nut+90PCS flat washer+90PCS spring washer..
  • Heavy Duty: bolt kits are made of high quality materials carbon steel, with excellent anti-rust and corrosion resistance property, can be used in extreme environments..
  • 2 Kinds of Washers: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliances.
  • Practical SAE Sizes: Use for fastening metal, wood and plastic materials together, includes sae sizes 1/4-20 x1/2" to 1-1/2", 5/16-18 x 3/4" to 2", 3/8-16 x 3/4" to 2".
  • Handy Kit: VIGRUE Bolt kit are stored in a transparent box organizer, convenient for your storage and use, handy for your daily reaching and putting away..
  • 2 Kinds of Washers Highly Compatible with Screws: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliancesl.
  • nuts and bolts are the same matching size with washers and features a solid bearing surface to prevent nut/bolt head from tearing through applicable material.
Check Stock

XDOVET Screw Extractor Set, Screw and Bolt Extractor Set, Easy Out | Heavy-Duty | Rocket Socket-25PCS

  • 【25 pcs bolt extractor set&multi-application】 Extractors from 1/8 inch (3.5mm) to 7/8 inch (23mm) by 1/32” increment and comes with a heavy-duty storage case.Extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications..
  • 【Precisely machined aggressive multispline teeth】The internal thread with reverse spiral flutes design to bite down to provide maximum gripping power, the more you turn, the tighter the socket grips.Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping..
  • 【High-visibility size】 Extractor size and recommended drill bit size are etched on each tool for quick selection of the right drill bit.Heavy-duty blow-molded case lets all the bolt remover stay organized and take your set on the go.Compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools. The knockout pin for easier removal..
  • 【Premium industrial grade material】Made of heat-treated high-quality high-carbon steel (chromi....
Check Stock

CURT 48650 Adjustable Lunette Ring or Coupler Channel 3-Inch ID x 11-3/4-Inch, 2-In Bolt Pattern

  • HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications.
  • ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 11-3/4-inch channel allows for 5 distinct height adjustment positions.
  • VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler (bolt kit #48620 sold separately).
  • TOUGH BUILD. This lunette ring / coupler channel mount is constructed from solid, one-piece, formed steel for superior strength.
  • WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option (hardware not included).
Check Stock

CURT 48610 Adjustable Lunette Ring or Coupler Channel 3-Inch ID x 7-1/2-Inch, 2-In Bolt Pattern

  • HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications.
  • ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 7-1/2-inch channel allows for 3 distinct height adjustment positions.
  • VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler (bolt kit #48620 sold separately).
  • TOUGH BUILD. This lunette ring / coupler channel mount is constructed from solid, one-piece, formed steel for superior strength.
  • WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option (hardware not included).
Check Stock