Reviews Heavy duty Pickup Roll Bar
Funny Shocker T-Shirt – This Little Piggy Got None – White
- Smoother Safer Towing: Add instant air ride towing to your pickup & camper trailer with a equalizer, weight-distribution hitch & sway control kit. Absorbs Road Shock: Air equalizer absorbs the road shock & cushions the ride when towing a camper with a weight-distribution hitch. Weight Distribution Hitch: Evenly distributes the weight over the axles of tow your vehicle and trailer to add stability and control..
- Eliminates Trailer Sway: Dual friction sway bars stiffen the connection between truck & trailer. Adjust & fine-tune your towing experience. Help reduce any sway from wind or road conditions. For 2-5/16″ Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? Comes with 2-5/16″ hitch ball. (2″ ball not included) Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring..
- Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7″ or 9″ of Adjustment (5″ of rise to 2″ drop or choose 5″ rise to 4″ drop). Fine tune for your towing weight. Just add air for heavier loads. Designed for 6,000 to 11,500 lbs gtw camper trailers. Available for 2″, 2 1/2″ & 3″ receiver hitch tubes: Works great on pickup trucks.
Check Stock
US Cargo Control Ratcheting Cargo Bar for Small Cargo Bar Needs - Extends from 40 Inches to 70 Inches - Great for Use in Pickup Truck Bed, SUV, Minivan, and Small Trailers
- HEAVY DUTY AND ADJUSTABLE - Easy to use in a Pickup, SUV, Minivan, Small Trailer, or any other area 40"-70" wide. This ratcheting cargo bar has non-slip feet to keep the adjustable cargo bar and your cargo in place! The rubber non-slip pads also help prevent scratching..
- SAFE AND SECURE - Similar to larger load locks, this pickup truck cargo bar keeps cargo where you want it! This pickup cargo bar is great for trucks with tonneau covers to keep items near the tailgate for easy access..
- DURABLE AND BUILT TO LAST - The steel construction on this ratcheting bar ensures durability with your toughest jobs. Non-Skid feet ensures the bar stays in place and so does your cargo..
- EASY INSTALLATION - Use the finger release to fully open the ratchet, extend to fit your application, ratchet tight (ratcheting too tightly can cause damage to vehicle walls, use caution), use the finger release again to lock the ratchet in place..
- SPECS - 1" Diameter Pole | 360 Degree Pivot on the Rubber Feet | 2-3/8" x 3" Rubber Feet | Extends from 40"-70" | Quantity: 1 Pickup Truck Load Bar.
Check Stock
Shocker Air Equalizer & Weight Distribution Hitch with Sway Control Arm Kit, Fits 2" Hitch 5" Rise 4" Drop
- Smoother Safer Towing: Add instant air ride towing to your pickup & camper trailer with a equalizer, weight-distribution hitch & sway control kit. Absorbs Road Shock: Air equalizer absorbs the road shock & cushions the ride when towing a camper with a weight-distribution hitch. Weight Distribution Hitch: Evenly distributes the weight over the axles of tow your vehicle and trailer to add stability and control..
- Eliminates Trailer Sway: Dual friction sway bars stiffen the connection between truck & trailer. Adjust & fine-tune your towing experience. Help reduce any sway from wind or road conditions. For 2-5/16" Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? Comes with 2-5/16" hitch ball. (2" ball not included) Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring..
- Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7" or 9" of Adjustment (5" of rise to 2" drop or choose 5" rise to 4" drop). Fine tune for your towing weight. Just add air for heavier loads. ....
Check StockRage Powersports Elevate Outdoor Ratcheting Cargo Bar
- Secures cargo in the back of a pickup truck or SUV for transport.
- Grooved, pivoting light tan rubber ends grip tight.
- Heavy duty construction with a locking ratchet.
Check StockALAVENTE 1 Bull Bar Nudge Bar Mounting Bracket Tube Clamp Kit for LED Light Bar / Work Light Black
- √ 360 Degree Rotation: Durable led light bar roll cage clamps led mount bracket can swivel 360 degree on any Round Tube / Shaped Roll Cage / Roll....
- √ Heavy Duty Material: ALAVENTE 1 inch led pods lights mount bracket is made of high quality sturdy and light-weighted steel metal material, durable....
- √ Easy To Install: It is very easy and simple to use our roll bar clamps to install your led lights in less time, and will not drill your perfect....
- √ Wide Application: Universal bull bar led light bar bracket is widely used on tube clamp and applied to LED light bar for almost all LED....
- √ Fitment: Apply to most ATV, car, truck, offroad, farm/industries vehicles etc. Fits 25mm(1") round tube/Bull bar/roll cage/bumper..
Check Stock
ABN Pick-Up Truck Bed Cargo Bar, 40” to 70” Inch Adjustable Ratcheting Cargo Organizer for Car Trunk, Pickup Truck, SUV
- EFFORTLESSLY SECURE CARGO: The ABN Pick-Up Truck Bed Cargo Bar, 40″ to 70″ Inch Adjustable Ratcheting Cargo Organizer for Car Trunk, Pickup Truck, SUV will tightly secure cargo loads in your vehicle so you can fill your truck or pickup truck bed with heavy bags in just seconds without having to juggle the shopping cart from hitting your doors or the cars next to you, or worse, the dreaded roll-away and chase-the-cart dance fiasco.
- EASY TO USE: Place bar in desired area against loose cargo and use the ratcheting design expansion system to securely lock in place (make sure both ends are firmly ratcheted against your application surface.
- Can be used on uneven or angled surfaces.
- Place grocery bags, luggage, lumber, toolboxes, storage chests, containers, plants, and more in your vehicle without having to worry about the items tipping, breaking, or rolling around your entire truck bed.
- ADJUSTABLE: Can expand from 40 inches to 70 inches (101.6cm to 177.8cm) to ratchet out to the width of your trunk or your truck bed.
- Hinged feet adjust to any uneven or angled surface.
- Non-slip rubberized ends swivel to allow for simple installation even at an angle.
- BUILT TO LAST: Ruggedly constructed to ensure that it can withstand tough conditions and ....
Check StockKolpin Rhino Grip XL - UTV Roll Bar Mount - 21535,Black
- Mount directly to your UTV roll barMount directly to your UTV roll bar. Up to 15lbs. of carrying strength for your medium-weight gear..
- Strong, rubber over-molded heavy-duty nylon and rubber straps securely hold tools, firearms, bows, crossbows, fishing poles, shovels, farm tools, etc and other gear of various configurations. NOTE: GUNS/HEAVY OBJECTS SHOULD NOT BE CARRIED IN THE FULL-TILT POSITION.
- Tilts 160° in 40° increments. Base rotates 360°..
- Heavy-duty base provides multiple mounting orientations for UTV roll bars from 7/8” – 2” diameters. Can also be mounted to any vertical or horizontal surface such as your UTV bed, garage wall, tool box, or just about anywhere!.
- Tool-free, Kwik-Clip design allows 360° rotation and easy removal of grips from base if needed.
Check StockTAC Bull Bar Fit 2016-2022 Toyota Tacoma Pickup Truck (Remove Skid Plate - If Equipped) 3' Stainless Steel Front Bumper Grille Guard Brush Guard
- FITS PERFECTLY – Fit 2016-2022 Tacoma Pickup Truck (Remove Skid Plate-If Equipped) (Please contact us to confirm fitment before ordering.).
- OUTSTANDING DESIGN - TAC bull bar creates a tough, heavy-duty appearance on the front end of your car while also providing protection and visibility..
- SURFACE FINISH - TAC bull bar is made of heavy duty Stainless Steel with mirror polish finish..
- EASY TO INSTALL - Direct bolt-on, all mounting hardware and Installation instruction included. Professional installation is always highly recommended. It may interfere with front mounted sensors..
- NO-HASSLE WARRANTY – TAC 3-year warranty against manufacturing defects!.
Check Stock
TMS 800Ibs Capacity Extendable Universal Steel Pickup Truck Low Profile Ladder Rack Sport Bar Lumber Two bar Set (Patent Pending)(24'')
- Set of 2 heavy duty steel adjustable truck ladder rack. This multi-functional rack is designed to haul bigger and longer items that the average pick-up truck bed cannot fit. It is perfect for ladders, lumber, pipes, pool equipment and much more..
- Sturdy frame offers a weight capacity of 800 lbs. Easy installation. Can be used as sport bar for pickup trucks such as Tacoma, Tundra, and etc..
- Max Height: 24 inches plus the height of your truck's bed. Different size available to meet your need. Find out which size fit your truck best by measuring the distance between the truck bed and roof before purchase..
- Width: Adjustable for most pickup trucks (Adjustable width of 5 feet minimum to 7 feet maximum where rack attaches to track bed)..
- New Hook Design makes it ideal end fitting for nearly any heavy-duty tie down job in which strength and security are priority..
Check Stock
Nilight NI-KIT02 Front Frame License Plate Mounting Bracket Holder for Off-Road LED Work Lamps Lighting Bars,2 Years Warranty
- ...ods to install the off-road lights. On the Bull bar, 2 Sets of mounting holes on top and 1 set in front.
- Easy installation: no drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes.
- Universal fitment: Fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars.
- Package include: 1Pc front license plate mounting bracket.
- Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion.
- Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front.
- Universal fitment: fits for almost all car, Jeep, truck, Pickup, SUV, 4×4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars.
Check Stock
