Reviews Heavy Duty Wiper Arm Puller

AMRA-30004 AFI 500 Wiper Kit - 80 Degree Sweep Set

  • The AFI 500 Wiper Motor Kit consists of a waterproof standard wiper motor, a stainless steel curved wiper blade and an adjustable stainless steel arm. AFI's 500 Wiper Motor is enclosed in a waterproof, thermoplastic housing, and is designed for exterior installation..
  • Draws 2 AMPs max power, and features self-parking wipers that return to the off position automatically. This motor is a standard motor, and is designed for light duty use. Runs on 12V power..
  • The 11.5" deluxe stainless steel curved wiper blade works well on curved or flat windshields and features a marine-grade silicone squeegee. The deluxe adjustable stainless steel arm has an articulating/bend-back feature, and is designed for use on standard and heavy-duty motors..
  • Kit Includes: 500 Waterproof Wiper Motor. 11.5" Deluxe Stainless Steel Curved Wiper Blade. Deluxe Adjustable (6.75" - 10.5") Stainless Steel Arm.
  • Features: 12V. 80 Degree Sweep. Self-parking. Windshield Mount 0.5" shadt diameter.
Check Stock

TMC FO1596 Heavy Duty Stainless Steel Dual Pantographic Windshield Wiper Arm, Extendable from 11-1/4 in (286mm) to 15 in (381mm), for FO-746 Wiper Motor

  • This TMC Dual Windshield Wiper Pantographic Arm allows the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield..
  • Adjustable Marine Wiper Arm 11-1/4 inches to 15 inches (286mm to 381mm). These TMC arms are used on standard and heavy-duty motors..
  • Made of AISI316 Stainless Steel corrosion-resistant and Black Matte coated. It comes with a Hex Key to be Adjust..
  • Requires a heavy-duty motor with a 9/16 in (14mm) shaft..
  • For Use with Five Oceans Code FO-746 (Wiper Motor).. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

VCT Wiper Arm Battery Terminal Removal Tool Bearing Arm Removal Remover Puller New

  • Ideal tool to remove stuck on wiper arms that haven't been taken off for years..
  • The heavy duty construction with locking feature allows the tool to be fastened securely to the wiper arm before commencing the pull.
  • The sprung loaded arm ensures a perfect grip, pulling the wiper arm squarely off every time..
  • It can remove bolted-on windshield wiper arms that fit over a tapered spline. Can also be used for removing over tight battery terminals and some alternator bearings..
  • SPECS: With swivel mounted thrust bearing and tommy bar Maximum opening: 36mm Maximum pull height: 27mm.
Check Stock

AUTOBOO Replacement for 2002-2016 Subaru Forester,Compatible With Impreza/Legacy/Outback Rear Windshield Wiper Arm Blade -Factory OE Style

  • 100% Brand New ,Genuine OEM Quality,Longer life. Replacement OEM number:86532SA070, 86532AG09A, 86532AG09B, 86532AG09C.
  • 【 FITMENT】Replacement for 2005-2016 Subaru Forester.
  • 2008-2014 Subaru Tribeca Rear windshield wiper blade arm.
  • 【 FITMENT】Replacement for 2005-2014 Subaru Outback.
  • 2005-2008 Subaru Impreza, 2006-2009 Subaru Legacy back window wiper blade arm.
  • 【Original Equipment Design】The same fit and function as when the vehicle was new,,Easy installation,high reliability.
  • ★CUSTOMER-SUPER SERVICE ★ AUTOBOO wiper arm Puller provide 24-hour online service, 6 month no reason to return, 365 Days warranty..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389

  • Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385

  • The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

Vautoparts Wiper Arm Puller Battery Terminal Puller - Wiper Arm Bearing Removal Tool Kit Wiper Ball Rama Car Repair Demolition Wipers Special Handling Tools Two Claw Puller Adjustable Versitile Clamp

  • This wiper arm puller is a perfect tool for removing the wiper arm stuck on the arm for years..
  • Tighten the knurled cone to force the jaws under the cable clamp, dual purpose use..
  • Turn the center screw to remove the clamping device from the terminal and remove the bolt-on windshield wiper arm mounted on the tapered spline.
  • Dimensions:12CM x 8.5CM x 3.6CM(4.72in * 3.35in * 1.41in). Jaw opening: 1/16" - 1-1/16" (6-28mm).
Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock