Reviews Heavy Duty Drain Plug

Glad Kitchen Sink Wash Basin for Dishes | Large Plastic Tub with Drain Plug | Multipurpose Dishpan for Cleaning Tableware | Sinkware Accessories, Grey

  • HEAVY DUTY PLASTIC SINK WASH BASIN – Made to perfectly fit inside of your kitchen sink, this wash basin is built from heavy duty plastic and is intended to make washing dishes a breeze while using less running water..
  • CENTRAL DRAIN PLUG WITH STRAINER – The center of the wash tub features an integrated drain plug with strainer. Simply twist the plug into the locked position to keep water in. Twist halfway to strain debris and food scraps. Remove the plug to drain the water entirely..
  • DRAIN HOLES PREVENT OVERFLOW – This kitchen accessory is essential in any home and promotes less water waste. Its deep build keeps water and soap in, while its drain holes on the top sides prevent any overflow for peace of mind..
  • MULTIPURPOSE WASH TUB – Not just for washing dishes, this sink insert can be used for washing fruits and vegetables, catching food peelings, and even hand-washing laundry for simple soaking of shirts, undergarments, and other clothing..
  • DISHWASHER SAFE FOR EASY CLEAN – This low maintenance wash basin is top-rack dishwasher safe for easy cleaning and measures 9.6 inche....
Check Stock

Dakine Freestanding Fish Bag, 6ft, Griffin

  • Heavy Duty Waterproof Cordura Coated Rip Stop outer fabric.
  • Heavy Duty coated PVC Inner liner for maximum waterproof protection.
  • RF Welded interior lining to ensure no pinhole leaks from stitching. 20MM Closed cell foam insulation.
  • Heavy Duty threaded Drain Plug with rapid and slow flow release ports.
Check Stock

Westbrass D93-62 1-1/2

  • 1-1/2" Coarse thread bathtub trim set with tip-toe drain plug and one-hole faceplate.
  • ADA approved tip-toe bath tub drain plug. Press once to close and again to open.
  • 1-1/2 in. Npsm (1-7/8 in. - 11-1/2 UNC) coarse thread exterior.
  • One-hole faceplate with one (1) 1/4 in.-20 x 1-1/2 in. Plated brass color matched screw included.
Check Stock

Westbrass R93-2-62 1-1/2

  • Bath tub trim set with tip-toe drain plug and faceplate.
  • Tip toe bath tub drain plug. 1-1/2 in. NPSM (1-7/8 in. - 11-1/2 UNC) coarse thread exterior.
  • Two-hole faceplate with two (2) 1/4 in.-20 x 1-1/2 in. plated brass color matched screws included.
  • Heavy duty metal construction. Do not use plumber's putty for installation use silicone seal.
Check Stock

2 Packs Marine Drain Plug Stainless Steel Boat Drain Plug Kit Oval Garboard Transom Boat Plug with Waterproof Seal Ring for 1 Inch Hole, Thread for 3/4 Inch

  • Quality Material Selection: our boat drain plugs are made of quality stainless steel, sturdy and solid, reliable and long lasting, strong against corrosion and rust, serving your boat for periods of time.
  • Ingenious Design: our boat drain plug kit has 1 inch hole, thread for 3/4 inch, providing bilge drainage when towed out, and the fixed screw system prevents plug loss, heavy duty for marine garboard.
  • Good Sealing Performance: the garboard drain plug has good tightness, screw thread and O ring provide a watertight fit, meanwhile, this threaded detachable plug allows discharge of the bilge when the ship is towed out of the water.
  • Timely Replacement: you will receive 2 packs of stainless steel drain plugs, utility boat discharging supplies for garboard use or replacement, and you can use them with confidence.
  • Versatile performance: the transom plug has a wide range of applications, suitable for ship stern, fish well, freezer, or boat and yacht, proving you with a better using experience and efficiency.
Check Stock

Marine Drain Plug Stainless Steel Boat Drain Plug Kit Oval Garboard Transom Boat Plug with Waterproof Seal Ring for 1 Inch Hole, Thread for 3/4 Inch (2 Pack)

  • Quality Material Selection: our boat drain plugs are made of quality stainless steel, sturdy and solid, reliable and long lasting, strong against corrosion and rust, serving your boat for periods of time.
  • Ingenious Design: our boat drain plug kit has 1 inch hole, thread for 3/4 inch, providing bilge drainage when towed out, and the fixed screw system prevents plug loss, heavy duty for marine garboard.
  • Good Sealing Performance: the garboard drain plug has good tightness, screw thread and O ring provide a watertight fit, meanwhile, this threaded detachable plug allows discharge of the bilge when the ship is towed out of the water.
  • Timely Replacement: you will receive 2 packs of stainless steel drain plugs with 4 screws, utility boat discharging supplies for garboard use or replacement, and you can use them with confidence.
  • Versatile performance: the transom plug has a wide range of applications, suitable for ship stern, fish well, freezer, or boat and yacht, proving you with a better using experience and efficiency.
Check Stock

JT-HLM Marine Stainless Steel Drain Plug Boat Oval Garboard for 1' Hole,Thread for 3/4' Transom Boat Plug with Waterproof O Seal Ring

  • ▲HIGH QUALITY MATERIAL:Marine drain plug is made of 316 stainless steel,easy installation,retention system keeps plug from getting lost..
  • ▲ DESIGN FEATURE:Simple and convenient to use, turn and lift the plug.
  • the plug is fixed to the base, so you will never misplace the boat plug again,provide bilge drainage when towing..
  • ▲Size:Heavy duty 316 stainless steel drain plug for 1″ hole,thread OD 3/4 inch.(Specific size reference picture).
  • ▲WIDELY USED:Threads and o-ring ensure a water tight fit,maintain sealing under vibration conditions,suitable for boat transoms,fish wells,ice chests,etc..
  • ▲RISK-FREE purchase! If you have any issues ，please feel free to contact us..
Check Stock

Coleman 16-Quart Personal Wheeled Cooler

  • FULLY INSULATED: Lid and body Keeps the Ice up to 5 days in temperatures as high as 90°F.
  • FOR THE LONG HAUL: Heavy-duty 6-inch wheels and durable tow & swing-up handles designed for easy transport.
  • CUP HOLDERS WITH DRAIN: Molded into the lid to keep drinks from spilling.
  • HAVE-A-SEAT LID: Closed lid supports up to 250 lb..
Check Stock

MACGOAL Stainless Steel Automatic Waterer Bowl with 2 Float Valves and Drain Plug, Water Trough for Livestock Dog Goat Pig Waterer

  • PACKAGE INCLUDE: 1 stainless steel water bowl with drain plug, 2 float valve (one float valve is already installed in the bowl, and another one is included in the package as a replacement for your spare use), and you can also find a replacement drain plug included in the package.
  • DURABLE MATERIAL: This automatic dog bowl is made from heavy duty stainless steel, study and rust-proof.
  • AUTOMATIC DESIGN: The float valve can fill the waterer with water automatically, so you don't have to keep refilling the bowl and the livestock can access fresh water whenever they like.
  • EASY TO USE: There is a drain plug at the bottom to flush old dirty bowl water.
  • 2 holes at the back are convenient to attach this waterer to the wall (mounting screws not included).
  • ideal water bowl for your dogs, goats, outdoor cats, livestock, pigs, calves, horses, cows, sheep, etc..
Check Stock

MC Enterprises 91365MC Ignition Module for Dometic Water Heaters (Replaces 93851MC)

  • 【Standard 1/2'' Size】The thread size of our rv water heater drain plug is 1/2" NPT male threads, this RV water heater replacement drain valve great replacement for your RV water heater.
  • 【Additional Teflon Tape】Teflon tape is a necessity for replace hot water heater valve, made of PTFE material, has a sealing function to prevent the leakage of water.
  • 【Brass body and Steel Handle】The body of the drain cock is made of high quality brass, the top of the drain cock is made of hardened steel. Heavy duty hardened steel material and good structure can ensure that the rv water drain valve can provide long term service.
  • 【Perfect Replacement】This upgraded water heater drain valve is ideal for RV, camper, and trailer water heater, this rv water tank drain valve effectively solve your leakage problem on the water heater..
  • 【Tips】You should flip open the hot water pressure relief BEFORE draining. That will take any pressure off of the tank. And add thread tape to both the large and small nut before you install.
Check Stock