Reviews Heater Injection Moulding Machine
maXpeedingrods 12V 8KW Air Diesel Heater with LCD Monitor & Remote Control fit for Motorhomes Boat Truck Bus Trailers (4 Outlet Holes)
- 【LOW MAINTENANCE】This 8KW diesel heater is assembled and you just need to install the intake, exhaust and air outlet pipes, it's very easy to install, remove and maintain.
- 【ENERGY SAVING】The optimized frequency conversion ECU accurately controls the injection frequency of the oil pump, and controls the intake air amount with the precise speed to extend the service life of the heater.
- 【ALL-IN-ONE UNIT】This is horizontal type of heater, it's more stable putting on the ground or any other surface, the size 14.57x9.84x10.24 inches will save you a lot of space and the built-in heater, fuel tank and fuel pump is time-saving.
- 【SAFETY&SECURE】The intelligent overheating sensor can prevent the heater from running dry and the LCD dynamic display will clearly show the running state of the machine.
- 【WIDE APPLICATION】The air heater can be widely applied for motorhomes, campervans, caravans, fifth-wheel trailers, popup campers and truck campers, kinds of trucks, pickup, van,bus,car,SUV, boat etc..
Check StockNEW 6PC New Compatible For Jeep Wrangler TJ 6
- Made of high quality polypropylene with paintable smooth finished.
- High quality injection moulding fender flares with smooth and precise edge cutting finish.
- Give your truck an instant rugged off-road look/ aggressive.
Check StockYXQ 110V 380W Injected Mould Heating Element Band Heater 35x35mm, 2Pcs
- Rust resistant steel sheath, stainless steel clamp type lock-up, notched sleeve allows installation, flush with nozzle hex..
- It is mainly used in the heating devices of plastic injection machine stuffing container..
- Band size : 35 x 35mm/1.4′ x 1.4 inch (inner Dia.H).
- Package Content : 2 x stainless steel band heater.
Check StockNxtop 110V 380W Injected Mould Heating Element Band Heater 35x35mm 2-PCS
- Rust resistant steel sheath, stainless steel clamp type lock-up, notched sleeve allows installation, flush with nozzle hex..
- It is mainly used in the heating devices of plastic injection machine stuffing container..
- Band size : 35 x 35mm/1.4' x 1.4 inch (inner Dia.H).
- Package Content : 2 x stainless steel band heater.
Check StockGlarks 370Pcs M2 M3 M4 M5 Female Thread Knurled Brass Threaded Insert Embedment Nut Assortment Kit for 3D Printing
- ★ Product Type: High quality knurled thread inserts nuts assortment kit..
- ★ Package Detail: In this set, it include 15 kinds of m2, m3, m4, m5 knurl thread inserts nuts total 370pcs which are well packed in a plastic box..
- ★ Product Material: All the nuts are made of premium brass, which has high hardness, no deformation, durable and reliable for long time use..
- ★ Easy to install: Since the insert has a conduction valve, there is no need to back-drill and counter-sink the hole..
- ★ Product Feature: Widely used on the injection moulding for tightly fixing.
- can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection..
Check StockHVAC Inlet Heater Hose Compatible for GMC Acadia Buick Enclave Chevy Traverse 20765678
- Keep warm in your cab with 20,000 BTUs of heat and 177 CFM airflow with the JEGS Automotive Heater..
- Compact design for limited space and tight areas such as a tractor cab heater..
- Our 12 volt heater for UTV has a long lasting three-speed motor to quickly heat up small areas..
- Heavy duty injection-molded and glass-filled nylon construction..
- Durable tube and fin heater core design. 4.500 in. H x 10.250 in. W x 7.875 in. D2-Speed Blower 12 V, 2-Speed Dual Scroll Blowers. Just the right size for small cabs. Under dash mounting, Front panel with 3 round adjustable louvers, Includes mounting bracket. Low [3.6 Amps] - High [5.7 Amps]..
Check StockECOTRIC 7
- 1997-2006 Jeep Wrangler TJ(will not fit sport sport utility models).
- Made from a unique poly material that is resists cracking, chipping or fading. High quality injection moulding fender flares with smooth and precise edge cutting finish..
- Give your truck an instant rugged off-road look/ aggressive.
- Hardware and rubber gaskets are to make fitment hassle free.
- Prevent stones, rocks and debris from contacting truck body.
- Placement on Vehicle:Left, Right, Front, Rear, Lower.
Check StockSolary Infrared Paint Baking Lamp, 2100W Short Wave Infrared Paint Heater Lamp, Car Bodywork Repair Paint Dryer, 1-60min Timing (Yellow)
- Keep warm in your cab with 40,000 BTUs of heat and 300 CFM airflow with the JEGS Automotive Heater..
- Compact truck heater design for limited space and tight areas such as a tractor cab heater..
- Our 12 volt heater for UTV has a long lasting three-speed motor to quickly heat up small cabs..
- JEGS heavy duty injection-molded and glass-filled nylon construction..
- Durable tube and fin core design. 7.000 in. H x 16.000 in. W x 8.625 in. D3-Speed Blower, 12 V. Requires external grounded - Low [5.5 Amps], Med [7.1 Amps], High [11.6 Amps]..
Check StockHilitchi 250-Pcs M2 / M3 /M4 Female Thread Brass Knurled Threaded Insert Embedment Nuts Assortment Kit
- ♛ High Quality Knurl Thread Inserts Nuts Assortment Kit.
- ♛ Package Quantity: 250pcs - Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
- ♛ Made of Bass Material, Featured With Heat Resistance.
- ♛ These Knurl Thread Insert Nut Can Be Widely Used On the Injection Moulding for Tightly Fixing.
Check StockNdeko na ngai okeba
- 【Full Size Keyboard, Plug and Play with It】104 Keys Full Size Keyboard. Featuring standard keyboard layout with F-keys ( function keys ) and....
- 【Practical & Ergonomic Design】The K1 keyboard is ergonomically designed with a scientific layout of high and low keycaps to fit your hands....
- 【Rainbow LED Backlight】The keyboard has a colorful LED backlight. The double-shot injection moulding process ensures that the letters never fade....
- 【Finer-resolution Mouse】6 adjustable DPI (600/800/1200/1600/2400/3200). High speed transmission technology makes it move faster and more accurate.....
- 【Reliable Performance & Wide Compability】Waterproof USB 2.0 cable, gold-plated interface and anti-interference magnet ring can ensure stable data....
Check Stock