Reviews Heat Pipe Tube

Zantlea Pipe and Tube Cutter, Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4\ O.D. PEX, PVC, and PPR Pipe

  • ...r are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting..
  • 【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue..
  • 【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space. And it will also bec....
Check Stock

AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

  • Product Function: AC orifice tube removal tool fits for most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier.
  • Material: GUZIKO orifice tube removal tool is made of high-quality metal, which is sturdy and durable and can be used for a long time.
  • Easy to Use: The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out. It saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Don't worry about breaking the end with pliers.
  • Notes: Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It's better to apply some heat the heat down and then start pulling.
  • After-sale Service: We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours.
Check Stock

GREHUA Upgrade Exhaust Pipe Muffler Jet Kit with Heat Shield Wrap Roll for Predator 212cc 196cc 6.5hp GX160 GX200 CT200U-ex BT200X CT200U Baja Warrior TrailMaster Massimo MB200 Go Kart Mini Bike Parts

  • ... HIGH PERFORMANCE—it's the predator 212cc high performance parts upgrade header exhaust pipe muffler jet kit. It's a simple job to upgrade go kart engine mini bike exhaust pipe muffler,and let the exhaust flow more smoothly to promote more power..
  • EFFICIENT HEAT SHIELD PRETECTION—it made of heat resistant silicone,which can be used for long time and won't melt. The heat shield spacer can withstands 1800°F Direct/2500°F Intermittent Heat prevent burns from the hot exhaust pipes during riding. It is made of high quality materials and it can play a protective role..
  • PACKAGE INCLUDED—1 x exhaust pipe,1 x muffler,1 x heat shield wrap roll,1 x spark plug,2 x lock washer,2 x nut,1 x wrench,1 X emulsion tube,3 x main jet(.036" & .037" .038"),1 x black low speed tube,2 x springs.
Check Stock

EZPHIX Pipe and Tube Cutter, Ratcheting Hose Cutter One-Hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4\ O.D. PEX, PVC, and PPR Pipe (orange42mm)

  • ...r are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting003c/p003e.
  • 003cp003e【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue.003c/p003e.
  • 003cp003e【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter will become smal....
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

YS-100 Auto PVC Heat-shrink Tube Cable Pipe Cutter Cutting Machine Cut Width100mm (110V)

  • In order to arrange shipment for you ASAP, please answer the following questions: ---1.What material is the pipe you want to cut? Is the pipe made of hose or hard pipe? It would be better if you could provide a picture of the pipe ---2.What is the total length of the pipe? How long do you want to cut each? ---3.Please tell us the width of the tube and the wall thickness on one side..
  • Cutting length: 0.1 - 9999.9mm，Cut speed: 100-120cut/ minute (50mm).
  • Blade width: 100mm， Max Cutting Diameter: 22 mm.
  • Can cut PVC pipe, heat shrinkable pipe, glass fiber pipe, silicone pipe, PTFE pipe, etc..
  • Multi-material cutting, high-quality guide strip discharge more smoothly, ensure cutting accuracy..
  • Use a special utility knife to ensure that the interface is flush..
Check Stock

uxcell Refrigeration Tubing, 1/8\ OD x 5/64\ ID x 16 Ft Soft Coil Copper Tubing

  • 【1/8" OD X 5/64" ID X 16 FT】Refrigeration tube outer dia is 3mm, inner dia is 2mm, total length is 16Ft/5m long.
  • 【HIGH REFRIGERATION EFFICIENCY】Good heat dissipation and refrigeration capability,high strength at low temperature.Copper tubes are hollow,so has strong heat transfer capability.If you need refrigeration for refrigerators, freezers, air conditioners, this is a good choice.
  • 【 COPPER MATERIAL】Copper refrigerator tube has the features of high temperature resistance, corrosion resistance, oxidation resistance, durability, long service life.
  • 【SOFT & SHAPE CHANGEABLE】Because refrigeration copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle.
  • 【WIDELY APPLICATION】Refrigerator Tubing is not only used for refrigerator, freezer and air conditioner as refrigeration tubing coil, but also used as a HVAC system pipe..
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

WGLAWL Durable Stainless Steel Tent Stove Chimney Pipe Kit Single Wall, Chimney Spark Arrestor, Fireplace Chimney Rain Caps,2.36 Inch/6cm Diameter Chimney Pipes,Camping Stove Accessories

  • MULTI-PURPOSE: This stainless steel stove flue pipe is specially designed for outdoor camping wood stoves with good heat and abrasion resistance. The flexible combination of straight pipes and elbows allows the stove to be used in more places, such as hot tents, hammock tents and RVs..
  • PRODUCT MATERIAL: Tent Stove Chimney Pipe is made of sturdy stainless steel. The stainless steel material has the characteristics of corrosion resistance, which determines the longer service life of stainless steel products. In addition, stainless steel has good high temperature resistance and can keep the product stable at high temperatures..
  • THICKEN THE CHIMNEY TUBE: the thickness of the chimney tube is 0.5mm. Compared with some easily deformable chimney pipes on the market, we use thicker pipes. The material is sturdy and not easy to deform by hand, which can ensure a longer life of the furnace tube..
  • CHIMNEY SIZE: The diameter of the chimney pipe of the camping stove is 6cm/2.36 in. Please confirm the diameter of the chimney pipe of the camping stove before placing an order..
Check Stock

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool，A/C Orifice Tube Remover/installerr

  • ?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
  • ?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
  • ?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
  • ?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
  • ?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.
Check Stock