Reviews Heat Exchenger Tube

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool，A/C Orifice Tube Remover/installerr

  • ?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
  • ?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
  • ?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
  • ?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
  • ?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock

Mophorn Automatic Heat-Shrink Tube Cutting Machine 250W YS100 Tube Cable Pipe Cutter Precise Efficient Tube Cable Pipe Cutter Cutting Machine for Sleeve, Rubber/Plastic Tube, Small Wire, Sheet, Film

  • Efficient & Precise Cutter: The heat shrink tube cutter has a cold cutting function. It features the synchronous cutting of 3 tapes. Cutting length: 0.1-9999.9 mm.
  • Max cutting diameter: 1/2". With a white steel welding knife and a high-strength feed drum, the cutting is efficient..
  • Computer Numerical Control: A microcomputer control system operates the heat-shrink tube cutting machine with a concise and easy-to-understand control panel. Set length, quantity, and speed are not erased even if power is off & on. Cutting accuracy: 0.1 mm..
  • 350 W Powerful Motor: The 350 W motor of the automatic heat-shrink tube cutter with high efficiency provides a cut speed of 100-120 cut/min (50 mm). There is a dissipation fan for secure, fast heat dissipation..
  • Durable Construction: Stainless steel construction ensures high quality and durability, resistance to corrosion and rust. The grounding plug has a built-in fuse with no-leaking, which will not burn the machine..
  • Various Application: The heat-shrink tube cutting is perfect for cutting tube, cable, tape, sheet, and film. It is widely used in the electronics industry, clothing and leather industry, automobile and motorcycle parts industry, and other industries..
Check Stock

SafBbcue 463344116 463343819 Replacement Parts Kit for Charbroil Advantage 463343819 466344116 Performance 463280419 Heat Plates G359-0003-W1 Burner Tube G466-2500-W1

  • ...ce 3 Burner Grills 463280019 463370719 463370919 463371319 463274016 463371316 463336016 463274019 463370917 463371119 463371716 463371719 463371116P1 463371116 463371119P1. Charbroil Grill parts 2 burner 463633316 463672016 463672216 463672219 463672416 463672419.
  • ✔ The heat plate replaces Charboil part number G361-0003-W1. ▶ Burner tube replaces Charboil part number G432-8M00-01 G466-2500-W1. ▶Please kindly check the SIZE and MODEL of your original parts before purchasing..
  • ✔ Package ▶ Includes 4 × Heat tent, 4 × Burner tube, 3 × Adjustable crossover tube. ▶ If you have any questions, please feel free to contact us, we will provide you with satisfactory solutions..
  • ✔ Material & Dimension ▶ The heat plates are made of stainless steel, dimension: 15 1/2" X 2". ▶ Stainless steel burner tube dimension: 14 3/8" x 3/5". ▶ Stainless steel carryover tube adjustable extending length 5"(L) to 9.4"(L)..
Check Stock

Flex-a-lite 315960 Extruded Core Radiator and Triple Electric Fans (1984-2001 Jeep Cherokee XJ)

  • New Flex-A-Lite performance radiators use a unique Extruded Tube Core technology, replacing multi-core radiators with an advanced design.
  • The Extruded Tube Core increases contact area between coolant and the aluminum tubes for better heat rejection and cooling.
  • The cooling fins have been designed with louver patterns cut into them to direct airflow, improving heat rejection and cooling.
  • The Flex-A-Lite Extruded Tube Core Radiators are significantly stronger and have a 100-psi burst rating.
  • Flex-A-Lite Extruded Tube Core Radiators include a corner subhead, reinforcing the cooling tube to header connection.
  • an area prone to cracking and leaking in other brands of aluminum radiators.
Check Stock

Rejekar Grill Replacement Parts for Weber Spirit I & Sprit II 200 Series E-210/E-220/S-210 Porcelain Steel Heat Shields Plate 15.3” Flavor Bars 7635 & 18” Burner Tube 69785 for Weber BBQ Gas Grill

  • 【Package & Dimension】Including 3 packs porcelain steel heat shields plate and burner tube set. Weber Grill Flavor Bars Replacement dimension: 15....
  • 【Material】Porcelain steel heat shiels heat tent flavor bars, Stainless steel burner tube replacement set, durable, corrosion resistance and heat....
  • 【Weber 7635 Burner Cover & 69785 Burner Tube Function】 15.3 inch Sturdy Enamel Heat Plate Flavorizer Bars - Used to catch drippings, adding a....
  • 【Product Information】 Aftermarket replacements, Please check and compare dimensions with your original parts before place order.
Check Stock

XHF 2 Inch 50mm 3 1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage 4 Ft Black

  • [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints,....
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion....
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to....
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

XHF 164 FT 1/4\ Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [Good shrinkage performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock

VEVOR Upgrade Heat Press Machine ETL Safety Certification 15 x 15 in 8-in-1 Heat Press Power-Saving Sublimation Machine 360°Rotation Heat Press Shirt Printing Machine for Shirts Cap & Mugs Red

  • DIGITAL CONTROL & DISPLAY: The new version of Vevor heat press is equipped with a precision digital display controller with built-in dual-screen display, easy to operate & control. Unique silicone keys feel comfortable and easy to press! Press (+/-) to switch ℃ and °F at will..
  • DUAL-TUBE HEATING: Unlike ordinary single tube heating, our heat press 15x15 adopts the latest double-tube heating technology. That makes the temperature difference is only about 5 ℃ between the center and the edge. But the old-fashioned heating tube is more than 10 ℃. Heating more evenly..
  • 360° SWING AWAY Swing: Swing arm of this heat press is fully rotated 360°, allowing the heating element to move aside and reducing accidental contact. Full-range pressure-adjustment knob allows better controlled pressure, making the pressure to be applied directly & evenly downwards enhances the quality of transfer further..
  • HIGH-SECURITY PERFORMANCE: Thanks to the new heat press use of two layers of insulation technology, the surface temperature is only about 50-70℃, when the working temperature reaches 210 ℃，which is safer and more reliable to avoid being scalded! But the traditional shirt press machine's temperature can reach 70-100℃..
  • 8 IN 1 VERSATILE KIT: VEVOR new heat pr....
Check Stock

XHF 164 FT 1/16' Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black

  • [Safety and environmental protection] XHF 2：1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
  • [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
  • [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
  • [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
  • [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock