Reviews Headers For 35chevy Small Blocks

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

...ed Black and are the OEM replacement brackets with all the correct contours This kit includes both the left and right side front engine mounts, and both left and right side front engine mounting brackets, that includes everything pictured.
Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of the timing cover, just above the harmonic balancer > It is possible to tap these holes on the blocks that are not threaded, but requires a skilled installer.
Factory Applications: | Fits Small Block Chevy V-8 Engines for the applications listed below: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1955-1957 Chevy Delray > 1955-1957 Nomad > 1955-1957 Sedan Delivery.

Pro Street/bracket, needs good intake, headers, gear and 3300+ stall..
250/256 Duration at .050". 110 Degree Lobe Separation Angle. 0.519"/0.523" Valve Lift.
CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
More vacuum allows an increase in duration for improved performance and assists power brakes. Best performance with aftermarket intake manifolds, headers and lower gear ratios..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

[ Part number ] --- 850001R, 8362, 850001-2, D100, 850002, D1001, 93440806, 66941R, 66941BK, D1051, 640000, D1002.
[ Application ] --- Compatible with Chevy C10 / C10 Suburban.
Compatible with GMC K1500, K25, K2500, K35, K3500, R3500.
[ Accessories ] --- Distributor with Spark Wires Ignition Combo .Complete unit including ignition module, cap, coil and rotor. Installation guide is included.
[ Features ] --- HEI Complete Distributor 262 265 267 283 302 305 307 327 350 383 400 small blocks and 396 427 454 big blocks. Red cap, One Wire Installation and tested before shipment.
[ Warm Tips ] --- Please check the year/make/model of your vehicle with the fitment chart and part number for the right compatibility before purchase.

[ Part numbers ] — 850001R, 8362, 850001-2, D100, 850002, D1001, 93440806, 66941R, 66941BK, D1051, 640000, D1002. Direct Part Replacement.
[ Application ] — Compatible with Chevy C10 / C10 Suburban.
Compatible with GMC K1500, K25, K2500, K35, K3500, R3500.
[ Accessories ] — Complete unit including ignition module, cap, coil and rotor. Installation guides are included.
[ Features ] — HEI Complete Distributor 262 265 267 283 302 305 307 327 350 383 400 small blocks and 396 427 454 big blocks. Red cap, One Wire Installation and tested before shipment.
[ Warm Tips ] — Please check the year/make/model of your vehicle with the fitment chart and Part number for the right compatibility before purchase.

Excellent response, good mid-range, noticeable idle..
218/224 Duration at .050". 110 Degree Lobe Separation Angle.
Excellent performance in street carbureted applications..
More vacuum allows an increase in duration for improved performance and assists power brakes..
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
Best performance with aftermarket intake manifolds, headers and lower gear ratios..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..

Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

【Standard Size HEI】--New HEI distributor for small block or big block Chevys.Coil Spark Of 7,500 RPM - with high voltage of up to 65K.
【For Coil-in-Cap HEI Design System】--Black with 90 Degree Boot for HEI Distributor, and Black 90 Degree Boot for Spark Plug..
【Replacement For Vehicle】--Replacement For Chevy Chevrolet GMC SBC 305, 307, 327,350 and 400 small blocks, 396, 427, and 454 big blocks HEI....
【Advantage】--Heavy duty distributor gear for durability, welded weight pins and heavy duty construction, Adjustable vacuum advance helps tune it....
【Warranty】--1 Year Limited Warranty for Replacement.

Great for street machines. Needs 2500+stall, headers and gears. Rough idle..
230/230 Duration at .050". 110 Degree Lobe Separation Angle. 0.480"/0.480" Valve Lift.
CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
Great high RPM power - Best with aftermarket torque converters and at least 9.5:1 compression..
Easy on valvetrain parts - Can be used with mild ratio rocker arms and traditional performance valve springs..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..