Reviews Header Bolts - BestBuyersPro.com

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Flowtech 11572FLT Small Block Chevy Turbo Headers - Natural Finish

Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 2.50” collectors with merge spears for increased exhaust velocity.
3/8” thick header flanges for a leak-free seal.
2.50” V-band flanges and clamps for superior seal and even pressure at the flange.
Premium header gaskets and bolts included.
Designed for a variety of configurations (Up and Forward, Down and Forward, or Down and Back).

Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

risingsaplings Rpi Pi GPIO Breakout Board 3 Types Output Terminal Block Module for Raspberry Pi 2 3 4 Zero

The module has been soldered and assembled. Support for Raspberry Pi 2 3 4 Zero..
3 Type Output: Male Pin Header, Female Pin Header and Terminal Blocks..
With 4pcs double-screw bolts and 8pcs screws. (Noted: the module not included Raspberry Pi Board)..

Check Stock

Tight-Fit Small Block Fits Chevy Block Hugger Headers

These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.

Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
Port configuration comparable to Fel-Pro 1426.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1404.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

Check Stock