Reviews Hardware Nut

BleepinJeep Yoke Wrench Tool

  • Fits many style yokes or flanges, axles or transfer cases. Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs..
  • Use a 1/2” breaker bar or a 3/4” black pipe (available at any hardware store) for leverage.
  • Hole is over 2” and fits most sockets. Use a breaker bar to loosen or a torque wrench to tighten retaining nut to spec..
  • For higher torque applications use a grade 8 bolt with a shoulder so the threads arent taking the load..
Check Stock

3/8" x 1" OD Brass Flat Washer, (25 Pack) - Choose Size, by Bolt Dropper

  • HIGH QUALITY BRASS – BRIGHT APPEARANCE: These washers are 100% solid Brass. Bolt Dropper’s washers are the highest quality out there, making them last longer than other hardware on the market today..
  • EVENLY DISTRIBUTES PRESSURE: The flat washers evenly distribute the pressure of not only the nut but also the head of the fastener. When used, the washers prevent damage to the material as well as reduce the chance of the nut loosening from an uneven surface..
  • GREAT TO KEEP AROUND: Bolt Dropper washers are great to have around for use where brass is required. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. Our hardware is strong, corrosion resistant and will support all of your projects..
  • DIMENSIONS: Inside Diameter: 3/8” | Outside Diameter: 1” | Quantity: 25 pcs | Material: 100% Solid Brass.
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE..
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

Benlari Black Axle Nut Covers Front Axle Caps 2002-2023 Compatible for Harley Davidson Touring Softail Sportster Dyna Trike Electra Street Road Glide Road King Fat Boyoy 2002-2021

  • Compatibility: 【Front Axle Nut Covers】It is front axle nut covers compatible for Harley Davidson Softail 2007-later (except Springer, Rocker),Touring 2008-later and Trike models,Dyna 2008-later,Sportster 2008-later,VRSC 2002-2011 models (except V-Rod Muscle and Street Rod)..
  • Note: 【2 screws 】The axle caps are 2 set screws and it can hides on your bike perfectly.Please check the size and confirm compatibility of this item before ordering..
  • High Quality:【Durable,Waterproof and Not Rusty】The axle covers are made of aluminum.Protect front axle hardware from dirt,moisture,dust and other external damage..
  • Easy Installation:【Come with mounting hardware】You can install the axle covers in minutes..
  • Package Contains: 【6 Months Warranty】1 pair of 1.2 Inch front axle nut caps with mounting screws (as picture shown) .Instruction NOT included..
Check Stock

WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker Double Coil Icemaker Water Fill Valve for Whirlpool 4318046.This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing,.
Check Stock

Crib Screws and Bolts Replacement-M6 Bolts Nuts Hardware Kit for Baby Crib Bed Cot Bunk Furniture Assembly 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm with M6 Barrel Nuts (16MM-85MM)

  • M6 crib screws bolts nuts are made of carbon steel, they are solid hardware replacements for most cribs, beds, Cot, Bunk, tables, chairs, or workbenches, DIY projects, furniture, etc..
  • This Baby Bed Crib Screws Bolts Hardware Kit includes M6 x 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm bolts and barrel nut (9.8mm x 11mm 12.5mm 14.5mm), 10 sizes bolts and 3 sizes barrel nuts, they fit most cribs, beds, tables, chairs, or workbenches, DIY projects, etc..
  • Buy this crib hardware kit, you will get 5pcs*16mm bolts, 5pcs* 20mm bolts, 5pcs*30mm bolts, 5pcs*40mm bolts, 5pcs*45mm bolts, 5pcs*50mm bolts, 5pcs*55mm bolts, 5pcs*70mm bolts, 5pcs*75mm bolts, 5pcs*85mm bolts and 15pcs* (9.8mm x 11mm, D x L) barrel nut / 15pcs* (9.8mm x 12.5mm, D x L) barrel nut / 20pcs* (9.8mm x 14.5mm, D x L) barrel nut, and a free hex wrench..
  • This Bolts nuts screws kit come in a clear plastic box, it is convenient to store the bolts and nuts and easy to take the right size bolts and nuts..
  • IMPORTANT: Please measure the size of the holes that the bolts fit in before purchase, bolts in this kit are M6, please check the lengths of the bolts you will need and confirm the size you will need to ensure you are ordering the proper size. // NOTES.
  • when specifying the length of a heade....
Check Stock

PZRT 40Pcs M5 Flat Washer Adjustment Hardware Fitting Accessories Metal Gasket for Bolts and Screws, 304 Stainless Steel Black Zinc

  • Material: 304 stainless steel, surface treatment: galvanized, black oxide coating provides mild lubricity.
  • Size: inner diameter: 5mm outer diameter: 12mm, thickness: 1mm, quantity: 40.
  • The flat washer not only distributes the pressure of the nut evenly, but also distributes the pressure of the fastener head evenly, which can prevent damage to the material and reduce the loosening of the nut from the uneven surface..
  • Application: Usually used in electronic instruments, precision machinery, mechanical parts, stamping parts, hardware parts, and hardware manufacturing..
  • Purpose: Fasteners for machinery industry.
Check Stock

Heavy-Duty Alloy Steel Furniture Leveller by Impromech|Tables & Chairs Leveling Feet|Height Adjustable Jam Nuts & 4 Prong T-Nuts|1-11/16 Non-Skid Based Table Legs & 1-3/8 Thread Length-(Set of 4)

  • 【EXCELLENT QUALITY】: Impromech alloy steel Adjustable table & chair levelers belong to the family of threaded fasteners, which primarily works as a Permanent fastener to stabilize furniture. These TPR rubber non-skid-based furniture protectors are hardware devices essential for every size of the machinery that helps us carry out our day to day activities with ease and comfort..
  • 【EASY INSTALLATION & UNIVERSAL FIT 】: Drill a 7/16" hole to 1-5/8 inches deep. Use a hammer to drill the Table's leg to the depth marked. The heavy-duty hardware nuts comprise T-Nut firmly into place to driving the prongs into the wood. Level Table with a 1/2 wrench twisting Nut on leveler for proper height & 9/16 wrench to tighten jam nut for the secure leveler..
  • 【FLEXIBLE ADJUSTMENT】: From furniture assembly to the balancing of all types of furniture at Home, Office, School, Restaurant, our t nuts are great as a project dependable. Using these leg levellers reduces the difficulty with rust prevention & helps to move your furniture with ease, superior strength & higher grades of steel..
  • 【STRONG & STURDY COMMERCIAL QUALITY 】: High-quality alloy zinc plated adjustable (3/8-16) 4 Prongs T-Nuts & Jam Nuts by Impromech Hardware with unique technology approved as perfe....
Check Stock

Sun Joe SWJ802E-HP Electric Pole Chain Saw Hardware Pack

  • Includes tension screw, tension nut, oil cap, chain/sprocket end cover, end cover nut.
Check Stock

Washburn B11K Banjo (5 String)

  • Body Shape: 5 String Top: Remo Body Material: Mahogany Neck Material: Mahogany Fretboard: rosewood Inlays: dots Nut: ABS Nut Width: 31mm Scale: 26.35 Hardware Bridge: Maple with Ebony tip Tuners: Chrome Die-cast Other Strings: J60+ light gauge nickel Case: BC82 - Case included in USA.
Check Stock