Reviews Hardware Brackets Post Base

Swing Set Anchor Leveling Kit :: Includes Four Large Molded Rubber Blocks with Stakes and Hardware for Installation :: Keeps Your Swing Set Safe and Secure While Protecting Wood from Ground Moisture.

  • Swingset Kit Includes Two A-frame Swing Set Brackets and Two Sets of A-frame Bracket Hardware, made of heavy gauge steel, solid welded joints, and a powder coated green finish will provide you with the brackets to build a top notch quality outdoor wooden swingset..
  • Each Jungle Gym Kingdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" galvanized lag screws and galvanized washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and swollen, it may create a tight fit in the bracket. If your treated lumber is dry, the ....
Check Stock

4x4 Post Point Cap - Solid Copper (3-1/2\ x 3-1/2\)

  • 【Applicable specifications and dimensions】- Item size: 6.8 x 5.6 x 3.8".
  • ,Inner diameter of the post bracket is 3.6 x 3.6 inches. The post base is used for 4x4 wood posts.
  • 【Sturdy】 - The post base is made of 1.5 mm thick steel, plated with black powder. It can prevent the post anchor from rusting, which is stable enough to support the bottom of the post..
  • 【Easy to install】 - Concise manual is offered. You can easily use it to install the 4x4 brackets in concrete with 0. 5 " diameter anchors..
  • 【Matching Accessories】 - A wrench, 12 x 3/8 Expansion Bolt and 24 x Self-tapping Screw are supplied. They are enough to fix the post base. So you do not need to buy other accessories..
  • 【Wide Application】 - The post base bracket not only suitable for post support bracket, porch railing support, fence post base, hand rails support, etc, but also suitable for many scene such as home, garden, farm, etc..
Check Stock

SimFab Modular Flight Simulator Pit For Combat Simulation. DCS Edition. Compatible With Thrustmaster Warthog, WinWing, VirPil, VKB And Alike Controls. Upgradable To General Aviation, Space Sim Or Sim Racing. (black seat)

  • ...eat with sliders and recliner. Seat features our patented removable foam insert for use with center mounted stick or cyclic 2. Chassis (frame) to attach: stick on right side, center mounted stick lower mount bracket for sticks with grip extensions or cyclic, throttle on left side, rudder pedals 3. Complete mounting hardware and wrenches to assemble and hard mount any compatible control set specified below. 4. Color print assembly manual booklet..
  • Compatibility: Product is compatible with: Thrustmaster Warthog stick and throttle and respectful variant stick grips. All VirPil controls. Optional brackets are required to mount collective, additional control panels or anything additional to base brackets. All WinWing controls. Optional brackets are required to mount collective, additional control panels, MIP, MFDs, DDIs or anything additional to base brackets, VKB gunfighter stick..
  • Compatible Rudder pedals: Thrustmaster TPR, TFRP, Logitech, CH Products, VirPil, VKB, MFG Crosswing, Slaw device, Turtle Beach Velocity One.
  • Warranties All SimFab and OpenWheeler metal parts are backed by lifetime factory warranty. Seat and fabric ba....
Check Stock

LETSHY 4x4 Post Base Wood Fence Post Base Brackets Coated Fence Post Anchor with Screws for Deck Porch Handrail Railing 4Pack

  • Multiple ways to use：Deck base suitable for deck post supports, porch railing,stair hand rails,Wooden house，mailbox fixed and anchor support fence post base brackets..
  • Use for 4 x 4" Post:4x4 post base fits a nominal standard 4"x 4" post (Inner Size 3.5 x 3.5 inch)..
  • Material：Heavy duty post bracket made from Heavy steel Q235.Designer constantly adjust for better looking..
  • Complete Accessories: 32 short screws (installed horizontally) to post. 16 long screws (vertically) to deck floor board. 16 sets of expansion bolts..
Check Stock

FMhotu 4x4 Post Base 10Pcs Internal 3.5 x3.5 Heavy Duty Powder-Coated Steel Post Bracket Fit for 4x4 Standard Wood Post Anchor Decking Post Base for Deck Porch Handrail Railing Support

  • 【Easy to Install】It's easy to Install the post base and convenient to use. Each post base has four holes at the bottom and eight holes at the top to make it more firmly fixed. There is no complicated installation process for this post base, so you only need to install the deck base brackets by fastening the screws..
  • 【Wide Use】The post anchor base is specially designed for many places that need to anchor wood posts. It is great for deck supports, porch railings, handrails, fences, benches, and mailbox posts. The post anchor base is a perfect decoration for many scenes such as doorways, gardens, courtyards, porches, etc..
  • 【Package List】FMhotu post base*10, User manual *1, Expansion Pipes *40, Self-tapping Screws *120. We provide the required screws so you don't need to buy additional accessories.
Check Stock

4\ x 4\ White Traditional Vinyl Post Skirt | Vinyl Post Trim | Two-Piece | Will NOT Fit A Traditional 4x4 Wood Post(Single Pack)

  • Easy to Install: 12/13 GA. Steel fence post base allows for easy installation of 4 x 4 (nominal) wood posts onto existing concrete or other hard surface..
  • Multi- Purpose Design: The base is made from 2.5mm thick steel and does not require digging. You simply attach it to the surface and screw in the wood post. Base design is perfect for deck supports, porch railing, handrails and post holders. It can also be used as table leg and mailbox post support brackets..
  • Sturdy and Durable: Make repairing or upgrading your fence easy and affordable by using your strong and secure black powder-coated steel constructed fence post base..
  • Comes with a Corner Level: Included in this offer is this foldable L-shaped sturdy plastic pipe and post corner level which has dimensions of 5.3" x 7.5"..
  • For 4 x4 Post: The DoMerch square box of the fence post base measures 3 5/8" x 3 5/8" to accept a 4 x 4 (nominal measurement) support timber . The height of the box is 5 1/2" and the entire base, left to right, measures 6 5/8 " for added strength and stability..
Check Stock

EZ Shades - 3-Way Corner Bracket, Durable Pergola Brackets for DIY Pergola Projects, Easy-to-Install 4x4 Post Bracket, Steel Extension Bracket for 4x4 Lumber Posts

  • Made for DIY Pergola Projects - Assemble safe and stylish free-standing pergolas with our 3-way angle bracket. Designed to be very sturdy, it strengthens your pergola’s build and stabilizes the wooden post in place..
  • Engineered from Heavy-Duty Material - Well made, water-resistant, durable and reliable, our pergola hardware is constructed out of fine quality steel. These brackets support your wooden pergola’s overall structure so that you can use it for a long time..
  • Easy to Install Corner Brackets - Setting up your pergola is a breeze with these brackets for wood posts. Because each post bracket is pre-drilled, you can start building your “EZ” shade solution without using complicated tools..
  • Suitable for Most Wood Types - Since our 4x4 bracket is versatile, you can easily build your pergola anywhere in your backyard. Whether you use pine, cedar or redwood, our corner bracket hardware answers your outdoor pergola-construction needs..
  • Helps Transform Your Outdoor Space - With our corner pergola brackets, you can beautify your backyard with a lovely free-standing wooden pergola. It’s a must-have accessory for every garden or lawn. So, you and your family can spend time outdoors without sun exposure..
Check Stock

CRH 2X 38 Black Deck Railing Wrought Iron Handrail Post Kit Top Mount

  • CHR Post with Installation Hardware & Tool: 38" Tall with Post Top Cap - 1.75" x 1.75" - Baseplate 3.25" x 3.25" (Each order contains 2 post).
  • Hardware & Tools Included! Safety has been made easy. Included are concrete wedge anchors (with masonary drill bit), wood lag screws (with pilot hole drill bit + nut holder bit + bit extender), leveler, ruler, and physical + online installation tutorials..
  • Universal Post: The CR Handrail cable post can be used with any other combination of railing. Customers can build a complete stair deck railing system with other CR handrails, pickets, or ballast setups or use for own project..
  • Durable Finish: This metal rail is highly durable due to its phosphate pre-treatment and powder coat finish. It's suitable for both indoor and outdoor use on decks, stairs, porches, balconies, and fences. It resists UV damage, temperature fluctuations, light scratches, and rust. Note that it's not stainless steel, but still has a high degree of rust resistance..
  • Available for Easy DIY Projects: Use these additional posts as extensions to DIY projects. Fence U channel, Post Covers, Brackets and Connectors are SOLD SEPARATELY..
Check Stock

12 Pack Simpson Strong Tie CBSQ44-SDS2 4x4 Post Standoff Column Base w/SDS Screws

  • 【MATERIAL & SIZE】-Inner actual size: 3.58 x 3.58 Inches (post body is 2mm thickness, and post base bottom is 3mm thickness), it's made from 13 gauge steel, galvanise & matte powder-coat with anti-rust,6-pack included..
  • 【STURDY & STABLE】-Double Layers painting coat to avoid the post base get rust and corrosion, we will galvanise first, and then paint with matte black powder coated, make it sturdy and abrasion resistant..
  • 【INSTALL ACCESSORIES INLUDED】-24pcs expansion bolts + 24pcs self-tapping screws + 48pcs small screws were included. Please note expansion bolts were using for concrete, and self-tapping screw is for wood..
  • 【EASY TO INSTALL】-Please note the post bracket inner actual size is 3.58 x 3.58'', so when you install the wood post, make sure the wood dried at all, and if the wood base is larger than the post base, then please try to sand and trim it, so it can fit with each other perfectly.
  • 【WIDELY USE】-The fence post anchor can be used for many places, decking handrails, pergolas, signs, mailboxes, & garden fences,deck brackets.It would help your fences look sturdy and durable while avoiding breakages..
Check Stock

SPACEEUP 4×4 Post Base 5 Pcs, Inner Size 3.6'x3.6' Post Base Brackets, Heavy Duty Powder-Coated Post Anchor Matte Black Wood Post Brackets for Pavilion Deck Railing Support Deck Base Plate

  • FIRM AND STEADY---Item size: 6.4 x 3.6 x 5.4"(LxWxH).
  • The post base is made of 2.0 mm thick steel, plated with black powder. It can prevent the post anchor from rusting, which is stable enough to support the bottom of the post and improve its service life..
  • 4x4 POST BASE---Inner diameter of the post bracket is 3.6 x 3.6 inches. The post base is used for 4x4 wood posts (actual 3.5"x 3.5" dry post on market). Attention: Before you buy it, please confirm the size of wood post..
  • EASY TO INSTALL---Concise manual is offered. Each post base bracket has eight holes on the body and four holes on the bottom. You can easily use the bolts and screws we provided to install the 4x4 brackets in concrete with 0. 5" diameter anchors..
  • ADEQUATE ACCESSORIES---A wrench, 20 x 3/8 Expansion Bolt and 40 x Self-tapping Screws are supplied. They are enough to fix the post base. So you do not need to buy other accessories..
  • APPLICABLE SCENARIOS---Our post bases are specially designed for porches, pavilions, decks, mailboxes, fences and railings, etc. Their solid quality can do what they can do..
Check Stock