Reviews Hard Coat Anodized Aluminum

DB TAC Quickdraw Clip for Glock s Part fits GEN 1-4 Models 17 19 22 23 24 25 26 27 28 30S 31 32 33 34 35 36

  • Fits all Gen 1-3 Only. Note: does not fit 42 and 43..
  • Can be Installed on Either Left or Right Side.
  • Ideal for Concealed Carry without a Holster.
  • Black anodized and permanent laser engraved slide cover plates are made from durable aluminum. Slide cover plates fit all Glock models and are easily....
  • Slide back plates are made of T6 aluminum, hard coat anodized. Clip is made of resilient metal alloy..
Check Stock

BASTION Magazine Base Plate Butt for Glock 19 17 22 23 26 | Gen 1-5| 9mm .40 .357 .45 Gap | Laser Engraved Black T6 Machined Aluminum Mag Floor Baseplate Bottom Skull

  • ...B OFF, LASER-ENGRAVED HIGH-RESOLUTION ALUMINUM (NOT PAINTED ON) MAG PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other customs Magazine base for Glock that is painted on or stickers, Bastion LASERED & ENGRAVED this artwork so that it will not rub off or wear off over time..
  • PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM METAL: Premium quality for Glock accessories that are machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • FANTASTIC REPLACeMENT FOR PLASTIC FACTORY PART: Swap Out / Replace factory parts. You will love the quality of Bastion products. Many different designs to choose from. We also offer custom engraving! *IMPORTANT NOTE – Bastion Magazine base plate does NOT increase the capacity of the magazine..
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we will quickly do all we can to make it right..
Check Stock

BASTION Magazine Base Plate Butt for Glock 19 17 22 23 26 | Gen 1-5 | 9mm .40 .357 .45 Gap | Laser Engraved Black T6 Machined Aluminum Mag Floor Baseplate Bottom (3 Numbered USA Flag)

  • ...B OFF, LASER-ENGRAVED HIGH-RESOLUTION ALUMINUM (NOT PAINTED ON) MAG PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other customs Magazine base for Glock that is painted on or stickers, Bastion LASERED & ENGRAVED this artwork so that it will not rub off or wear off over time..
  • PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM METAL: Premium quality for Glock accessories that are machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • FANTASTIC REPLACeMENT FOR PLASTIC FACTORY PART: Swap Out / Replace factory parts. You will love the quality of Bastion products. Many different designs to choose from. We also offer custom engraving! *IMPORTANT NOTE – Bastion Magazine base plate does NOT increase the capacity of the magazine..
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we will quickly do all we can to make it right..
Check Stock

BASTION Laser Engraved Rear Cover Back Plate for Glock Gen 1-5; Model Compatibility in Description Below. Does not fit Glock G42, G43, G43X, G48 - Zero F*CKS

  • ...NGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time..
  • MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • STANDOUT CUSTOM LOOK, FANTASTIC REPLACEMENT FOR PLASTIC FACTORY PART: Not only keeps your firing pin and the extractor plunger assembly in place, it also adds a little flair to your plain old plastic back slide cover. The fastest and most inexpensive way to customize your device!.
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock

BASTION for Glock | Gen 1-5 | Models G17 19 21 22 23 24 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 45 | Engraved Back Plate Aluminum Back Butt Rear Cover Plate - G19 Model Number

  • ...NGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time..
  • MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • STANDOUT CUSTOM LOOK, FANTASTIC REPLACEMENT FOR PLASTIC FACTORY PART: Not only keeps your firing pin and the extractor plunger assembly in place, it also adds a little flair to your plain old plastic back slide cover. The fastest and most inexpensive way to customize your device!.
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock

BASTION for Glock | Gen 1-5 | Models G17 19 21 22 23 24 26 27 29 30 31 32 33 34 35 36 37 38 39 40 41 45 | Engraved Back Plate Aluminum Back Butt Rear Cover Plate Bible Verse - Psalm 23:4

  • ...NGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time..
  • MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • STANDOUT CUSTOM LOOK, FANTASTIC REPLACEMENT FOR PLASTIC FACTORY PART: Not only keeps your firing pin and the extractor plunger assembly in place, it also adds a little flair to your plain old plastic back slide cover. The fastest and most inexpensive way to customize your device!.
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock

Broken Mir

  • Longer Effective Range: Magnifier and red dot are designed for increase your effective shooting range. This optics magnifier adds 1.5X - 5X variable....
  • High Accuracy: red dot sight allows for accurate, both-eyes-open shooting. 5 red dot brightness settings provide optimal visibility in any light....
  • Absolute Co-Witness: Reflex sight with Picatinny rail mount and magnifier with Flip to Side Mount Focus Adjustment, Absolute Co-witness with A2 front....
  • Fast focus: 40mm reflex lens provides quick target acquisition, also a wider field of view to maintain situational awareness. Parallax corrected &....
  • Durable & Compatible: Tough & shockproof, the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy....
Check Stock

Rowe Tactical Bergara CZ 457 Bolt Knob Threaded M6X1 - Aluminum - Black Anodized Hard Coat - for Bergara and CZ 457 Threaded in M6X1 RT-BLKANO-BK-E

  • Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
  • Black anodized hard coat finish for optimal strength and durability..
  • 100% Manufactured and Hard Anodized in the United States of America..
  • Installs easily on M6X1 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Rowe Tactical Bergara CZ 457 Bolt Knob Threaded M6X1 - Aluminum - Black Anodized Hard Coat - for Bergara and CZ 457 Threaded in M6X1 RT-BLKANO-BK-A

  • Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
  • Black anodized hard coat finish for optimal strength and durability..
  • 100% Manufactured and Hard Anodized in the United States of America..
  • Installs easily on M6X1 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Rowe Tactical Bergara CZ 457 Bolt Knob Threaded M6X1 - Aluminum - Blue Anodized Hard Coat - for Bergara and CZ 457 Threaded in M6X1 RT-BLUEANO-BK-E

  • Machined from premium billet, mil-spec, aircraft grade T6 aluminum..
  • Blue anodized hard coat finish for optimal strength and durability..
  • 100% Manufactured and Hard Anodized in the United States of America..
  • Installs easily on M6X1 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock