Reviews Hard Anodized Scope Finishes

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

NightForce Standard Duty 1-Piece Picatinny-Style 1913 Mil-Std 20 MOA Black Matte Aluminum Mounting Scope Base Compatible with Remington 700 Short Action

  • STANDARD DUTY BASE - Nightforce Standard Duty bases are a quality, affordable solution for ensuring that your scope is firmly mounted to your gun.
  • ALUMINUM HARD ANODIZED MOUNT - These aluminum bases are machined to Mil. Std. 1913 rail specifications and hard anodized for durability and scratch resistance.
  • PICATINNY-STYLE BASE - Picatinny has a slightly wider, and slightly deeper slot.
  • the picatinny rail also has a standardized spacing of the slots, and the slots typically extend down the length of the rail.
  • 1- PIECE CONSTRUCTION - Milled from a single piece of lightweight aluminum.
  • available with zero elevation or 20-MOA for long-range shooting.
  • MAINTAINING - Clean all mating surfaces thoroughly before mounting.
  • use a torque wrench and do not exceed recommended torque values for base screws: 25 in-lb.
Check Stock

NightForce X-Treme Duty Ultralite Unimount Scope Mount, 1.5in, 30mm Rings, 0 MOA Taper, Black, A496

  • X-TREME DUTY UNIMOUNT - Nightforce Ultralite Unimount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - This X-Treme Duty Ultralight Unimount scope ringmount is 1.5" high, fits 30mm scope tubes, and features a 0 MOA taper.
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

Nightforce Optics X-Treme Duty Ultralite Compact Magmount Scope Mounting System, 1.5in, 34mm Rings, 20 MOA Taper, Black, A362

  • XTRM DUTY COMPACT MAGMOUNT - Nightforce Compact Magmount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - This X-Treme Duty Ultralight Compact Magmount scope mounting system is 1.5" high, fits 34mm scope tubes, and features a 20 MOA taper.
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

Nightforce Optics X-Treme Duty Ultralite Unimount Scope Mount, 30mm Rings, 1.5in High, 20 MOA Taper, Black, A221

  • X-TREME DUTY UNIMOUNT - Nightforce Ultralite Unimount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - These X-Treme Duty Unimount scope ringmounts are for 30mm scope tubes, and feature a 20 MOA taper.
  • Available in different heights: 1.125", 1.375" and 1.5".
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

Monstrum Alpha Series 1-6x24 First Focal Plane FFP Rifle Scope with MOA Reticle | Black

  • High performance tactical rifle scope with 1-6x magnification for close to mid distance shooting out to 400+ yards.
  • Functionally designed first focal plane MOA reticle, with easy-to-read ranging information that remains constant regardless of magnification, for....
  • Aircraft grade aluminum construction with a 30mm sealed, nitrogen charged tube for resistance to water and fog.
  • 6061 grade aluminum construction with a rugged MIL-STD 8625 type III hard anodized outer finish.
  • A set of spring loaded flip-up lens covers for protecting your scope lenses when not in use.
Check Stock

Nightforce Optics X-Treme Duty MagMount Scope Mount, 1.44in, 34mm Rings, 0 MOA Taper, 3 Jaw/Nut, for Guns with Canted Rails, Black, A162

  • X-TREME DUTY MAGMOUNT – Nightforce Ultralite MagMount is a tough, reliable mounting system that doesn’t add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN – This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES – Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS – This X-Treme Duty Ultralight MagMount scope ringmount is 1.44″ high, fits 34mm scope tubes, features a Zero degree MOA taper and three-jaw clamping system.
  • NOTE – Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

Nightforce Optics X-Treme Duty Ultralite Compact Magmount Scope Mounting System, 1.5in, 34mm Rings, 0 MOA, 3 Jaw/Nut, for Guns with Canted Rails, Black, A361

  • XTRM DUTY COMPACT MAGMOUNT - Nightforce Compact Magmount is a tough, reliable mounting system that doesn't add substantial weight. It is designed to remain attached to the scope at all times, allowing quick removal and installation on different guns.
  • UNIQUE DESIGN - This scope mount features a CNC machined 7075-T6 hard anodized aluminum body and titanium beta series crossbolts and jaws. This unique design and construction provides the performance of steel at half the weight.
  • PRECISE TOLERANCES - Precise tolerances ensure that the scope is not subjected to stress, strain, or bending as the ring screws are tightened.
  • SPECIFICATIONS - This X-Treme Duty Ultralight Compact Magmount scope mounting system is 1.5" high, fits 34mm scope tubes, features a Zero degree MOA taper and three-jaw clamping system.
  • NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: Crossbolts: 68 in lb, Cap Screws: 25 in lb.
Check Stock

Vortex Optics Diamondback 3-9x40 SFP Riflescope Dead-Hold BDC MOA black

  • The Diamondback 3-9x40 riflescope is ideal for big game, muzzleloader and slug shotgun applications. The Dead-Hold BDC reticle is good for any hunting....
  • Lenses are fully multi-coated for crystal clear, bright images from dawn till dusk. The fast focus eyepiece allows for quick and easy reticle....
  • Metal on metal precision turrets offer the ability to zero reset after sight-in. A precision glide erector system ensures accurate tracking and....
  • A solid one-piece tube with a hard anodized finish creates a shockproof and durable scope while helping camouflage the shooter's position..
  • Argon purged and O-ring sealed the scope will deliver a lifetime of fog proof and waterproof performance..
Check Stock

Firefield Spotting Scope Camera Adapter

  • Camera adapter for point and shoot compact digital cameras take clear digiscope pictures through high power spotting scope.
  • Adapts point and shoot cameras to straight eyepiece spotting scopes.
Check Stock