Reviews Handheld Reaming Tool

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

PAGOW T Handle Taper Reamer, 5-16mm Tapered 6 Hand Held Fluted Chamfer Reaming, Repairman's Bridge Pin Hole Reamer Woodworker Cutting Tools

  • Material: Made of hardened ball bearing steel (#9027) with precision ground cutting edges..
  • Tapered Reamer Diameter:1/8"-1/2"(3-13mm).
  • T-Handle Grip: Provides greater leverage and easier reaming. Provides leverage for easier operation and rotation,saving effort. Removable handle for compact storage..
  • Perfect tool kit for every DIY users to enlarge holes in wood. Suitable for reaming taper holes on wooden boards,chamfering,deburring,easy to screw counterbore..
  • Precision machined cutting edges smooth metal surfaces with little effort. Useful tool for removing burrs from steel, brass, aluminum, plastic, wood and wallboard..
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • ...eburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact drill, it works more efficiently than the round head reaming tool. (The drilling speed should not be too fast.) The drill bit is made of durable and wear-resistan....
Check Stock

uxcell Chucking Reamer 1/4\

  • Specifications: Cutting dia.: 5.6mm / 0.22".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock