Reviews Hand Taper Pin Reamer

ATOPLEE T Handle Reamer Tapered Straight Flute Handle Hole Pipe Reaming Tool for Wood Latches/Guitar/Woodworker/Luthier/Repairman Maintenance,1/8-1/2 inch 3.18-12.7mm

  • {Good Quality Material}Made of hardened and tempered tool steel(45# steel) with precision ground cutting edges,more hardness and durable..
  • {T-Handle Design}Easy turning and sure handling .；The degree of the taper is:10.
  • {Many Usage}Enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.Also perfect for when a drill could cause cracking in sheet metal, plastic and other materials with little effort..
  • Total Length:140mm ；Shank Diameter:13mm.
  • {Package Included} 1pcs Hand Tapered Reamer.
Check Stock

2Pcs High Carbon Steel Straight Shank Morse Taper Reamer Rough + Fine Hand Reamer Set Replacement(MT2#)

  • HIGH QUALITY-- Morse Taper Reamer is made of high carbon steel, it is not easy to wear and has a long service life..
  • 2PCS-- Each set of two reamers, one rough and one fine, meets different work requirements..
  • APPLICATION-- Available in a variety of models to meet most daily work needs. A perfect replacement for the broken or worn one..
  • GOOD PERFORMANCE-- Morse Taper Reamer features fine workmanship, high precision, high cutting efficiency..
  • 5 OPTIONAL MADEL-- Optional Model: MT1#, MT2#, MT3#, MT4#, MT5#, meet your different requirements.
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56068, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56067, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock