Reviews Hammer Drive Anchor

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

CONFAST 1/4 x 3 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

CONFAST 1/4 x 2 Split Drive Flat Zinc Plated 100 per Box

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

2000pcs 1/4 x3/4 Hammer Drive Anchor Zinc Alloy with Zinc Plated Steel Nails inch Size 1/4 Length 3/4

  • HAMMER DRIVE ANCHOR, ZINC ALLOY WITH ZINC PLATED STEEL NAILS (INCH).
Check Stock

Hard-to-Find Fastener 014973285432 Nylon Mushroom Nail Drive Anchors, 1/4 x 3/4, Piece-100

  • TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
  • ZINC PLATED-Provides rust resistance for dry applications.
  • FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
  • NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

Worldity 200Pcs Self Drilling Drywall Anchors with Screws, Drywall Anchors Tapping Screw Kit, No Drill or Holes in Wall, Self-Drilling Drywall Anchors for Fixing Picture, Cabinet, TV Shelf -70lb

  • ...d, it is divided into two parts to better fix on the wall. The drywall anchors screw’s flat shape design, leaves only a small gap in the drywall when you remove it, convenient for you to repair later..
  • EASY TO INSTALL: Without using a hand drill to drill holes,only use a hammer to drive the ribbed anchors into the wall, then insert screws, and finally tighten the screws with a screwdriver until they are fixed.It can be completed within 30 seconds, improving work efficiency..
  • WIDELY USED: Very suitable for fixing curtains, home pictures hanging, closets, clapboard brackets and and TV wall brackets ect. Especially for apartment dwellers and anyone who rents (or manages rentals) to hang your art and pictures while minimizing damage and repair to drywall..
  • SIZE & PACKAGE: The metal drywall anchor size is 1.18 "x 0.39", and the screws size is 1.18 "x 0.15". You will receive 100 anchors and 100 screws. If you have any satisfaction, we provide 360 days free replacement service, so you can buy with confident..
Check Stock

P-Set - P38OH 3/8\ Drop-in Anchor Setting Tool

  • Designed, manufactured and patented in the USA.
  • Materials and components sourced from US companies.
  • Hands free anchor setting -- only use the hammer hand (even overhead).
Check Stock