Reviews Hammer Drills

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • ..., coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • WIDE APPLICATION: This concrete hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone). It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier. You can order worry free and start using this hole saw kit for your home improvement projects right away..
Check Stock

Sabre Tool 1-1/4 Inch x 15 Inch SDS MAX Rotary Hammer Drill Bit U-Flute Carbide Tipped for Brick Stone and Concrete 1-1/4 x 9.5 x 15

  • 1-1/4" x 9.5" x 15" SDS MAX Drill Bit – ONLY COMPATIBLE WITH SDS MAX ROTARY HAMMERS (NOT REGULAR DRILLS, NOT SDS+).
  • Our high quality rotary hammer drill bits are designed to work in all masonry applications.
  • Compatible with all SDS MAX sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • Long life - SDS hammer drill bit features a 4 blade cutter head with self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Optimized design – our SDS bit’s U-Flute design allows material to quickly move out of the hole while the bit remains cool.
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • ...S Plus function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The Heavy Duty Drill has drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel..
  • FOUR FUNCTIONS Use the knob hammer drill switch to switch between Demolition Chisel Hammer Drill to make holes with rotary drill SDS bits, Electric Hammer Chiseling both positions ideal for projects on Concrete, Brick, Granite, etc., and normal Drill Position ideal for drilling and making holes in wood, metal, aluminum, etc. the last function Position Adjustment help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes..
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
  • SAFETY CLUTCH offers protection if the bit ever gets jammed while using the power demolition drills & hammers drill in any tasks s....
Check Stock

StoreYourBoard Electric Drill Storage Rack, Holds 4 Drills, Hanging Wall Mounted Organizer for Garage, Home, Workshop, Shed

  • ORGANIZE YOUR WORKBENCH: Wall-mounted storage for up to 4 cordless drills, impact drivers, or hammer drills..
  • INDUSTRIAL GRADE: Heavy-duty stamped steel design supports up to 35 lbs. Durable powder coating protects against scratches..
  • EASY TO INSTALL: No assembly required! Mounting hardware is included. Designed to fit standard 16" wall studs..
  • QUICK TOOL ACCESS: Hang your drills at arms' reach for easy access during your projects. 1.5" wide slots fit most cordless drills..
  • DESIGNED IN THE USA at our headquarters in Troy, Virginia. Engineered & tested to meet our high standards of quality..
Check Stock

REETAI-FOUR 17 PCS SDS Plus Rotary Hammer Drill Bits & Chisels Set, Concrete Masonry Hole Tool with Storage Case,Carbide Tipped for Brick, Stone and Concrete.

  • [PACKAGE INCLUDED]: 13×Drill Bits, 1×Point Chisel, 2×Flat Chisel, 1×U-groove Chisel, A variety of sizes to meet your different needs..
  • [INDUSTRIAL MATERIALS]: 40Cr carbon steel, YG8 carbide tip, sturdy and durable.Premium carbon steel with heat treatment improves core strength for maximum durability and extended life..
  • [MULTI PURPOSE]:This set is perfect for working on concrete, masonry, wall, bricks, stone and road..
  • [EASY TO USE]: The SDS PLUS shank is suitable for most rotary hammer drills and meets most of your needs. SDS chisel matches the electric hammer drill , such as Bosch, Hilti, Milwaukee, Makita, Dewalt drills and other SDS/SDS Plus drills, etc..
  • [CARRY CASE] : Supplied in a light, portable plastic case for easy transport and storage.All the bits and chisels are fixed in the slots in the case.If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • ... The chip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier..
Check Stock

Yakamoz 1.5-13mm Quick Change 1/4-Inch Hex Shank Drill Chuck Adatper with Key Convert Impact Driver and Wrench to Drill Attachment Tool

  • Note: The product can NOT be used counterclockwise ! It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken..
  • Constructed from premium chrome vanadium steel. Capacity Range: 1.5 - 13mm/ 1/16" - 1/2", Mount: 1/2"-24UNF..
  • Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16" to 1/2" shank.
  • Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving.
Check Stock

MK Morse 139038-MKM 050326139038, multi, one size

  • Durable, heavy-duty, carbon steel arbors come complete with pilot drills.
  • Adapt Morse hole saws to any power drill used by professionals.
  • Hex arbors with non-slit jaw slots are positive drive.
  • SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills.
Check Stock

Sabre Tools 5/8\ SDS Plus Ground Rod Driver Bit for use with Rotary Hammer (5/8\ Ground Rod Driver)

  • 3/8" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock