Reviews Gutters And Downspouts Sealant

15 Pack 6” × 49’ Thick Mesh Gutter Guard- Rustless Aluminum Leaf Filter Gutter Protection Snap-in & Covered Style Gutter Covers Anti Clogging Gutter Screen for 4” 5” 6” Gutters (Sliver)

  • All in one gutter guard for downspouts with 4 guards and 4 adapters for 5" or 6" gutters.
  • No more measuring! Fits 95% of all gutters with 2" x 3" downspouts or 3" x 4" downspouts on gutters with a flat (not-rounded) bottom.
  • Full gutter guard systems are expensive. Install the Downspout Gutter Guard in seconds. Prior to installation, checking downspouts for obstructions, such as screws or brackets is recommended.
  • Keep Gutters Flowing - Eliminates Messy Clogging By Directing Leaves and Debris Away From Downspout Openings.
  • Connectors Included To Connect Wedges Together For Downspouts Located Away From Corners of a Home.
  • Arrives flat but assembles in minutes with no tools required! Made in U.S.A.
Check Stock

KILZ TRIBUTE Paint & Primer, Interior, Color Sample, Deep Onyx, 8 Ounces

  • Ideal for painting exterior walls and items such as siding, trim, doors, foundations, gutters and downspouts, trellises and fences.
  • Low-odor formula for long-lasting durability Dries to the touch in 30 minutes and covers between 75-100 sq. ft. per quart.
  • Paint is self priming and will adhere to surfaces without sanding..
  • Ideal for painting exterior walls and items such as siding, trim, doors, foundations, gutters and downspouts, trellises and fences. Paint film guaranteed for 5years. Dries to the touch in 30 minutes and covers between 75-100 sq. ft. per quart.Creates a washable.
Check Stock

Prestige Exterior Paint and Primer In One, 1-Gallon, Semi-Gloss, White

  • Ideal for painting exterior walls and items such as siding, trim, doors, foundations, gutters and downspouts, trellises and fences.
  • Low-odor formula for long-lasting durability Dries to the touch in 30 minutes and covers between 75-100 sq. ft. per quart.
  • Paint is self priming and will adhere to surfaces without sanding..
  • Ideal for painting exterior walls and items such as siding, trim, doors, foundations, gutters and downspouts, trellises and fences. Paint film guaranteed for 5years. Dries to the touch in 30 minutes and covers between 75-100 sq. ft. per quart.Creates a washable.
Check Stock

HEATIT HIRD 80 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

PipeMate Self-Regulating Heating Cable for Pipe Freeze Protection, 120V, 5Watts/Ft. (3 Feet)

  • Material: The roof deicing cable is made of plastic + copper core, the self-regulating temperature design is safer and energy saving, easy and reliable to use on your roof..
  • Features: Pipe heating cable 50ft(15.24 meters), no need for thermostat, this heated cable can self-limiting temperature of 65℃, greatly reducing energy waste. (no heating when the internal temperature reaches 65℃). Three pulgs in US standard to meet the circuit use of most households..
  • Function: Designed to prevent pipes from freezing and water damage caused by ice dams, from forming on roofs, gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutters with our heat trace cable roof..
  • Use Places: This heat trace cable is perfectly for roofs, gutters and downspouts, easy heat roof de-icing cable..
  • Installation: Can be installed by spiral, crossing, straight, etc. Easy and safe to follow instructions, no overheat risk, and will not short or burn out if the pipe heating cable is overlapped..
Check Stock

HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

HEATIT HIRD 30 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned....
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips....
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking,....
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building....
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the....
Check Stock

H&G lifestyles Roof Snow De-Icing Heating cable Self-Regulating-Plug-in Ready Heat Cable 140 feet 8 Watts Per Foot

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs..
  • Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with ....
Check Stock

MalCo. Tools SC2 Downspout Crimper

  • Makes a single crimp for downsizing aluminum downspouts.
  • Work gutters easily using this Malco Single Crimper Gutter Tool (SC2).
  • This light duty tools makes a single crimp for downsizing aluminum downspouts.
Check Stock