Reviews Gun Vises

Mabeeze One Way Anchor Vise 8-11 Gauge Wire with Screws, 10 Pack Tightening Vise for Vineyard, Trellis, Arbor or Fences

  • Our one way vises keep your wire tightened preventing it from slipping back and conveniently securing it to the post. Wire vises can be used for a large range of projects including vineyards, trellises, arbors, orchards, animal fences or any other outdoor wire applications.
  • Easy to use, just insert the wire into the long narrow end of the vise towards the plate end and pull from the other side. Once inserted the wire holds in place and can only be moved in one direction..
  • Made of heavy duty aluminum, our waterproof vises are perfect for outdoor use and work best with bare or galvanized steel wire. Wires with other types of coating may not hold on the vise..
  • Includes 10 vises and 20 galvanized steel screws.
  • Wire vise dimensions are 2.3'' x 1.3'' x 1.3'' (6cm x 3.3cm x 3.3cm) and fits 8 to 11 gauge (0.116"-0.160") wire.
Check Stock

Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 7" (17.78 cm), Jaw Opening 8" (20.32 cm), Throat Depth 3" (7.62 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
Check Stock

GarMills 2 Pack Magnetic Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set 4.5 Inch (113mm)

  • 2 Pack Set with both 2 Standard & 2 Multi-Groove Jaw Pads 4.5" (113mm) will work with a 4 inch to 5 inch bench vise.
  • Standard pads have a waffle faced surface that are durable and long lasting.
  • Multi-Groove pads have 5 round grooves: 90 Degree angles: 1/16", 1/8", 1/4", 3/4". 60 Degree angle: 13/32".
  • Embedded magnets that work great with Bench Vises, Clamps, Drill Press, Millers, and more.
  • Great for DIY Projects, Arts and Crafts, jewelry Makers, gun smithery, golf clubs, holding delicate objects and more.
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

HHIP 3900-2131 Steel Quick Clamp Vise Work Stop

  • Will work in left or right hand location.
  • Bolt-on design, requires no modification to vise.
Check Stock

HFS (R) 8\ Milling Machine Lockdown Vise -Swiveling Base - Hardened Metal - CNC Vise

  • [JAWS]: Premium quality swiveling milling vises features perfectly aligned precision gowned jaws..
  • [FEATURES]: Acme screws and easy to read 0-360deg scales..
  • [HIGH QUALITY]: Trust your best work with these quality milling vises..
  • [MATERIAL]: Made from the highest quality ductile Iron 80000 PSI for minimum bending..
  • [DESIGN]: Designed so horizontal force pushed the jaws downward, keeping your piece in the right spot..
Check Stock

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
  • Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
  • The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
  • Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
  • Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
  • Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Check Stock

Yost Vises 445 Combination Vise | 4.5 Inch Jaw Width Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Cast Iron and Steel U Channel Bar

  • COMBINATION VISE: The Yost Vises 445 4.5-inch utility combination pipe and bench vise is made from a 30,000 PSI cast grey iron with steel U channel bar. Equipped with a large anvil work surface. Also has as a replaceable hardened steel serrated top jaws and a large pipe capacity permanent serrated pipe jaw..
  • TECHNICAL SPECS: Jaw Width 4.5" (11.43 cm), Jaw Opening 4" (10.16 cm), Throat Depth 2.625" (6.6675 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 2" (5.08 cm)..
  • SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime te....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock