Reviews Ground Resistance Tester

Rothco Vintage Paratrooper Shorts, ACU, Large

  • [All Functions in Your Hand] - The KZYEE KM10 Power Scan Kit is the revolutionary circuit tester for 12-24V vehicles. You can access four precise diagnostic modes (DC Voltage, AC Voltage, Resistance and Diode), providing efficient electrical system testing, continuity testing, fault diagnosis, ground testing without fuses, component activation on and in the vehicle, and voltage detection. It is the perfect tool for all automotive electrical needs..
  • [Built-in Diagnostic Power] - With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead together to power up components in your hand. Easy to apply, it can power components such as radiator fans, starter motors, relays, window regulators, and windshield wipers. Quickly check components for continuity, identify positive, negative and open circuits, and locate shorts without wasting fuses..
  • [Best Repair Assistant for You] - Intuitive interface, the KM10 probe tester is an essential tool for automobile user to check system failure by themselves. The power circuit probe kit can also perform continuity and resistance checks, checking for the good and bad grounds, which a....
Check Stock

DY4100 Digital Earth Ground Resistance Tester Multimeter Resistance Measurer 0-2000 Ohm

  • DY4100 Digital Ground Resistance Tester can test earth resistance of various earth systems including power systems, electric.
  • More complete functions, higher accuracy, more convenient and reliable for operation and more suitable for outdoor use with dust and wet proof structure..
  • DY4100 with LED LCD screen, potenial pole, grounding pole, current pole, voltage pole ect..
  • Lightning conductors as well as resistance value of low resistance conductor and AC voltage test..
Check Stock

ANCEL BST200 12V Car Battery Load Tester with ANCEL PB100 Automotive 12/24V Circuit Tester Probe

  • Includes: 1 x BST200 Battery Tester, 1x PB100 Circuit Tester.
  • Works on automotive 12V 100 - 1100 CCA lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, SUV, motorcycle, light truck, and more..
  • Gives you an accurate result in only 3 seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • ..., circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by the component, you can accurately judged whether the component is intact, such as blower motor, power window motor, windshield wiper, rear window defroster, lights, radiator fans, fuel injectors, etc. Autel PS100 circuit tester automotive tool can activate component in your hand/ in the vehicle/ with ground etc..
Check Stock

Autel® Powerscan PS100 Power Circuit Probe Tester, Automotive 12V 24V Electrical Car System Diagnostic Circuit Tester, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test, 40ft Cord

  • ...tinuity testing, short circuit location and components activation. Technicians can check for fuse failures, component failures, aging or degradation, circuit failures without changing plugs.
  • 【Easy to Diagnostic Work】AVOmeter allows you easy to read voltage, current and resistance. Flipping of the power switch, you can have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc. It support you to identifies positive, negative and open circuits instantly, to test for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses.
  • 【Built-in Flashlight and Long Extension Cable】Autel PowerScan PS100 Automotive Circuit Tester has Built-in Flashlight design. Enables mechanics and technicians to operate night work effortlessly. Coupled with the clear data display on the dashboard, it is very helpful, easy and convenient to work even at night or in dark garage. Contain 20ft (extendable) cable provides excellent accessibility to test along the vehicle even if limited by the location.
  • 【Durable and Safety】Autel PS100 Circuit Probe Kit has short-cir....
Check Stock

Klein Tools 69149 Electrical Test Kit with Multimeter, Non-Contact Voltage Tester and Receptacle Outlet Tester

  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation.
  • The NCVT-1 has a bright green LED to indicate the tester is working.
  • it changes to red and warning tones sound when voltage is detected.
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life.
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults.
  • Identifies open ground, open hot, open neutral, hot/ground reversed.
  • it does not indicate quality of ground, multiple hot wires, or a combination of defects.
Check Stock

Usatest Power Circuit Probe, Powerscan Automotive Circuit Tester,12V 24V Electrical System Diagnosis Tool AC DC Digital Voltage Short Finder,Car Voltage Tester Digital Voltmeter

  • ...ed by a circuit breaker, which is a safe measure to protect the unit and your components from overload..
  • 【ELECTRICAL TESTER】USA-003 electrical tester can easy to read AVOmeter, so you can easily use your fingers to control powerscan diagnosis of DC Voltage, AC Voltage, Resistance and Diode of 12v-24v electrical systems..
  • 【FLASHLIGHT】 Built-in Flashlight enables you to work in the dark. Even in a dark environment where you can't see clearly, USA-003 fuse tester automotive kit can give you a good view..
Check Stock

Neoteck Electrical Test Kit, Mini Digital Multimeter + Receptacle Outlet Tester + Non-Contact 12-1000V AC Voltage Detector Pen- Great Packs!

  • ...ct 12-1000V AC Voltage Detector, and a Receptacle Tester to Meet Most Electronic Testing Needs, Ideal for Laboratory, Education, Factory, Workshop, Household Use.
  • 【Mini Multimeter】Multi-functional Tester with Backlit LCD Display, Also Comes with with Pair Test Lead, Accurately Measures AC/DC Voltage, DC Current, Resistance, and More, Recommended by Many Professionals Engineers, CE Rated for Over Load Protection, Includes 9V Batteries Under Load.
  • 【Non-Contact Voltage Detector】 This Non-Contact Voltage Tester Detects AC Voltage within 12-1000V AC, Distinguish the Live Wire and Null Wire through Different Frequency Alarm Sound and Flashing Led Levels.
  • 【Standard US Receptacle Tester】Featuring Lights that Indicate Circuit Condition, Tests Standard & GFCI Sockets/ Outlets/ Receptacles for Proper Wiring (110-125V AC), Detect Five Different Wiring Faults: Open Ground, Open Neutral, Open Hot, Hot/ Ground Reverse, and Hot/ Neutral Reverse.
  • 【Wide Application】A Set of Quick Fix Tool, Perfect for Weekend Warriors, DIY Homeowner and Anyone just Learning How to Do This Type of Work, Helping You Evaluate the Outlets and Identify the Hot Wires in the Basement Testing, Durable Quality for a Long Time Use with 18 Months US Base Warranty Back up.
Check Stock

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance..
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds..
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds)..
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm).
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not..
Check Stock

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

  • Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
  • Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
  • It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock