Reviews Grooved Ball Joint Bearings

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Genuine Ford Fluid XG-8-A PTFE Lubricant - 1 lb.

  • GreaseCo HeavyDuty Grease Tub Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
Check Stock

Simatec BP 61 Simatool Ball Bearing Puller, 394" ID, 11" Width

  • To remove grooved ball bearings efficiently from shafts and cases without dismounting the bearing.
  • Suitable for bearing sizes from 10 to 100 mm bore diameter.
  • 6 puller arm sets and 2 threaded spindles in a practical case.
Check Stock

Neewer Carbon Fiber Camera Track Slider Video Stabilizer Rail (80cm)

  • 6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes.
  • Flexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head.
  • Multi-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider.
  • Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters.
  • Gear-shaped joint interface and locking knobs for better position locking for the legs.
  • Convenient Carrying Bag: Easy and carry, transport and store.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

Neo Synthetics HP800 High Performance Wheel Bearing Grease, 1 Lb Tub

  • GreaseCo HeavyDuty Grease Cartridge is a Lithium Complex Red And Tacky Grease for use in High Temperature EP Applications.
  • Excellent Tractor Grease, Wheel Bearing Grease, Automotive Grease, Ball Joint Grease, Hitch Ball Grease, Axle Grease, Trailer Wheel Grease, Tie Rod Grease, Bushings, Bobcat Lube Points, Chassis Lubrication, Electric Motors, Gears, Plain Bearings, Presses, Roller Bearings, Steering Knuckles, Trailers, Universal Joints, Winches, And Many More!.
  • An All Purpose Grease Tube for Automotive, Construction, Mining, Hauling & Trucking Sectors Due To It’s Enhanced High Temperature And Extreme Pressure Properties.
  • Universal Fit: Works with Lock N' Lube, DEWALT, MILWAUKEE, Lincoln, Lucas, Ryobi, Bravex, GreaseTek, STEINBRÜCKE and Many More Manual and Automatic Grease Gun Brands!.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere..
  • A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive..
Check Stock

OTC CA7149 Ball Joint Connected Adapter Starter Kit

  • Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
  • Works with most OTC ball joint kits, cups and adapters.
  • Locking cups and adapters set up faster on the vehicle and leave one hand free.
  • Starter kit option (CA7149) includes 7 cups and adapters to work on more than 230 vehicles models, 38% more than the competition.
  • No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check Stock

OTC CA6630 Ball Joint Connected Adapter Professional Kit

  • Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
  • Works with most OTC ball joint kits, cups and adapters.
  • Locking cups and adapters set up faster on the vehicle and leave one hand free.
  • Professional Kit option (CA6630) includes 25 cups and adapters to work on more than 600 vehicle models, 76% more vehicle models than the competition.
  • No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check Stock