Reviews Groove Ceiling T bar

10 BUTTERFLY DAMPER - Control Your Airflow on drop ceiling grilles of 24x24 10 round duct opening

  • Control Your Airflow on Drop Ceiling Grilles.
  • See our separate listing for T-Bar Supply Grille.
  • Check Out This Asin For Matching T-Bar Drop-Ceiling Grille: B007CNEIVA.
  • QUALITY PACKAGING & SATISFACTION GUARANTEED- Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for....
Check Stock

Accord Ventilation ABCD2X2 Ceiling Diffuser 24 x 24 White

  • Three-cone fixed pattern T-Bar ceiling diffuser for 360 degrees of high volume air diffusion in your HVAC system, fits 24 inch X 24 inch ceiling....
  • Formed rib around a 2” high, 8-inch wide fixed collar to easily connect to a flexible duct in suspended, drop or T-Bar ceilings.
  • Durable commercial grade steel construction with white corrosion resistant powder coat finish for longevity.
  • Foil backed fiberglass insulation protects against condensation and moisture.
  • Accepts Accord Ventilation 8 inch butterfly damper model #34308 to control airflow (sold separately).
Check Stock

ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

  • Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling.
  • fits Epson, Optoma, Benq, Viewsonic and most other projectors.
  • Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch.
  • projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
  • Includes an AMERICAN WRITTEN installation manual with illustrations and photos.
  • Includes scissor clamp and one 8 inch aluminum suspension rod, and screws.
  • maximum spider mount leg span is 12 inches, mount hole to mount hole.
  • it is shown for demonstration purposes only.
Check Stock

Connector Removal Tool Kit, 3 Pc

  • D-sub Connector removal tool, for easily pulling out the D-sub pin.
  • Groove design: the middle groove of the needle bar is designed to put the wire into the groove to protect the wire from damage.
  • Passivation process: the surface is bright and uniform, more wear-resistant and corrosion-resistant.
  • Stainless steel needle bar: ensure sufficient hardness, no bending, deformation and fracture.
  • Aluminum handle: safer and more comfortable to use.
Check Stock

CPROSP Decking Straightening Tool Deck Board Bender Straightener Bending Carbon Steel Srtaightener 66CM/26In Weight 1.5KG Universal Wood Universal

  • ❤ Material: The plate bending machine is made of high-quality carbon steel material, heavy-duty steel structure, has the greatest strength and durability, powder coating, anti-rust, and can be used for a long time..
  • ❤ Size: 26 inches (66 cm) long. The U-shaped joist grip bar has a maximum thickness of 1-7 / 8 inches (4.8 cm), and the compression lever allows 90-degree and 45-degree tilt to meet your needs..
  • ❤ Application: This bow-bending tool is designed for deck, fence and mortise-and-groove plywood. Also suitable for woodwork materials such as floor, tongue and groove ceiling, wood board, paneling..
  • ❤ Simple operation: can be used as push or pull according to the situation. Lock in place for your nails. Just point the U-shaped arm at your boards, and when you push or pull the grip to make no gaps between the boards, nail them. This plate bender can mount the deck accurately and quickly. As easy as having a third hand..
  • ❤ Satisfactory service: We will provide you with 100% satisfaction service. Such a convenient tool, I believe you will like it. If there is any problem, your message is very welcome, we can solve it for you in time, try it..
Check Stock

Ultimate Body Press Ceiling Mounted Pull Up Bar with Patented Reversible Risers for 16 and 24 Inch Joists

  • BETTER PLACEMENT: Ceiling Mount for your pull up bar gets your pull up workouts away from the wall to give you total range of motion. Ceiling mount frees up wall space for your large equipment and puts your workouts where you have open floor space.
  • PATENTED RISERS: The Ceiling Mount Pull Up Bar's patented dual position risers flip to mount below 16 inch floor joists or below 24 inch ceiling joists for total placement flexibility now and in the future.
  • 4 GRIP POSITIONS: Finely tuned angled grips on the ergonomic bar provide a natural hand position and reduce strain for greater intensity and focus. 4 grip positions in premium high density foam let you target more muscles with greater variation.
  • EASY INSTALLATION: The Ceiling Mount Pull Up Bar is precision engineered for easy home installation and includes assembly instructions, mounting template on heavy stock, complete hardware, and USA tech support.
  • IDEAL ANCHOR: Anchor optional Bodyweight Resistance Trainers to turn your pull up bar into a full bodyweight gym. Complete full sets of pull ups and other challenging exercises right from day one with assisted exercise variations. [sold separately].
  • DESIGNED IN THE USA: Ultimate Body Press is a North Carolina company committed to delivering better workout....
Check Stock

HealthCraft Products SuperPole with SuperBar: Floor-to-Ceiling Pivot & Lock Vertical Pole with Horizontal Support Rail, Elderly Tension Mounted Transfer Pole Safety Rails for Bedroom & Bathroom Safety

  • ...locking positions, one every 45 degrees, for superior centralized support as you move. This system provides safety and increased mobility assistance at all points during a transfer to prevent falling. Installtion couldn't be easier! Simply align the pole and tight the jack screw to secure between the floor and ceiling. No Tools required!.
  • Simply lift the horizontal bar to unlock, pivot to next position, and then lower it to lock firmly in place. No need to fumble around with messy locking pins like other safety poles and grab bars. This piece of home medical equipment is ideal for use in living room, in the bathroom or in the bedroom as the perfect bedside stand aid..
  • The SuperPole with SuperBar is a floor-to-ceiling safety pole that features HealthCraft's "Pivot & Lock" SuperBar to keep support where you need it, in front of you. This product is ideal for elderly adults and handicap users looking to ad security to showers and bathtubs and for anyone who wants to add mobility and assist aids for getting in and out of bed or the shower and bathtub..
  • The SuperPole fits ceiling heights 93-99".
Check Stock

TB Home 8\ Acacia Wood Serving & Cutting Board with Juice Groove

  • PERFECT FOR PREPPING: handy bar board is great for slicing lemons and limes, chopping ingredients or serving snacks.
  • JUICE GROOVE INCLUDED: unlike most bar boards, this board features a juice groove to catch excess juice and keep countertops clean.
  • REVERSIBLE: flip the board over for a flat cutting surface with no juice groove.
  • NATURALLY BEAUTIFUL: acacia wood looks wonderful on kitchen counters or when used as a serving board.
  • EASY CARE: simply hand wash or wipe with a damp cloth.
  • do not soak in water or wash in the dishwasher.
Check Stock

Juno Lighting IC23 W G 6-Inch IC Rated Universal Incandescent Housing with Floating Socket with Push in Electrical Connectors and Air-Loc Gasket, 6 Inches - No Plate, New Construction

  • Juno 6 inch incandescent new construction housing is IC-Rated which allows housing to be completely covered with insulation.
  • Integral T-bar Notch and clip secures housing in suspended Ceiling grid –no accessory clips required.
  • Included Floating socket with spring attaches to trim for easy installation. Integral T-bar Notch and clip secures housing in suspended Ceiling grid –no accessory clips required.
  • Pre installed air-loc gasket from factory Stops the movement of air, in or out, reducing heating and cooling costs.
  • Can be used with trims that support these lamp bases: A19, BR30, BR40, PAR16, PAR20, PAR30, PAR30L, PAR38, R20 and R14. See spec sheet for complete list of compatible trims.
Check Stock

2-Pack 2x2 FT LED Panel Light eSenLite 40W 4200 Lumens 3000-5000K Adjustable 0-10V Dimmable Remote Control 24x24 Inch LED Drop Ceiling Light UL Listed and DLC Listed

  • Operating flexibility: dimmable either with standard 0-Volt to 10-Volt dimmers (as low as 1% with smooth adjustment) or with remote control....
  • Wide operating voltage: 110-Volt to 227-Volt AC/50 Hz to 60 Hz, worldwide AC power source compatible.
  • Installation: drop this ultra-light panel right on the lay-in T-bar ceiling, easily recess the panel while replace old fixtures or for new....
  • Application: Not just for standard T-bar ceiling, also prefect for surface and wall mount decoration, A.D. post lighting and hanging lighting..
  • Slim Gree design and unique: enjoy a perfectly distributed light that is completely shadow less from the Edge-LIT LED Gree technology, complete....
Check Stock