Reviews Grey Iron Part

guangyintong HTV Heat Transfer Vinyl Rolls 12\ x 5ft - Iron on Vinyl Easy to Cut &Weed, Glossy Surface (k11-grey)

  • 1.【WIDELY USED】Now grey heat transfer vinyl are widely used in all walks of life in the world, and our HTV vinyl produced by guangyintong is mainly used for athletic mesh fabrics, Cotton, polyester and cotton blend, Lycra/spandex, textiles etc. Such as bags，pillows，shirt, sportswear, aprons, hats. Can’t be used with waterproof coating, such as glass, ceramic, plastic..
  • 2.【GOOD THICKNESS】This heat transfer vinyl roll is made of PVC material with smooth and glossy surface. We call it K series. The characteristic of this film is that it is thicker than that of other companies, so when cutting, the pressure needs to be increased that will be easier to cut & weed. The size is 12inch x 5feet (30.5cmX1.53m).
  • 3.【ADHESIVE BACK】The grey iron on vinyl you got is two layers, a colored membrane and a protective sticky plastic membrane. The advantage of sticky back 1. You can stick back when you weed wrongly, the misaligned part can be glued back without wasting material.
  • Another feature is when pressing, the sticky transparent plastic film can be fixed on the clothes, which don’t move easily. So it is suitable for new learners, easy to weed & heat..
  • 4.【HOW TO USE GREY HTV VINYL】(1.Use computer to create your design 2. Feed the vinyl into c....
Check Stock

febi bilstein 14129 Clutch Slave Cylinder, pack of one

  • Original febi bilstein spare part – Solutions „Made in Germany”.
  • Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!.
  • OE numbers (for comparison purposes only): Alfa Romeo Romeo 46421942.
  • among others suitable for: Alfa Romeo Romeo: 145, 146, 155, 155 4×4, GTV, Spider.
  • FIAT: Brava, Bravo I, Coupe, Marea, Marea Weekend, Marengo, Palio I Weekend, Tempra, Tempra Weekend, Tempra Weekend 4×4, Tipo I.
Check Stock

guangyintong HTV Heat Transfer Vinyl Rolls 12\ x 12ft - Iron on Vinyl Easy to Cut &Weed, Glossy Surface (Grey k12)

  • 【WIDELY USED】Now Grey heat transfer vinyl are widely used in all walks of life in the world, and our HTV vinyl produced by guangyintong is mainly used for athletic mesh fabrics, Cotton, polyester and cotton blend, Lycra/spandex, textiles etc. Such as bags，pillows，shirt, sportswear, aprons, hats. Can’t be used with waterproof coating, such as glass, ceramic, plastic..
  • 【GOOD THICKNESS】This heat transfer vinyl roll is made of PVC material with smooth and glossy surface. We call it K series. The characteristic of this film is that it is thicker than that of other companies, so when cutting, the pressure needs to be increased that will be easier to cut & weed. The size is 12 inch x 12 feet (30.5cmX3.65m).
  • 【ADHESIVE BACK】The grey iron on vinyl you got is two layers, a colored membrane and a protective sticky plastic membrane. The advantage of sticky back 1. You can stick back when you weed wrongly, the misaligned part can be glued back without wasting material.
  • Another feature is when pressing, the sticky transparent plastic film can be fixed on the clothes, which don’t move easily. So it is suitable for new learners, easy to weed & heat..
  • 【HOW TO USE GREY HTV VINYL】(1.Use computer to create your design 2. Feed the vinyl into cuttin....
Check Stock

guangyintong Heat Transfer Vinyl for T-Shirts 12\ x 8ft - Grey HTV Vinyl Roll Iron on-Easy to Cut &Weed, Glossy Surface (Grey K12)

  • ...world, and our HTV vinyl produced by guangyintong is mainly used for athletic mesh fabrics, Cotton, polyester and cotton blend, Lycra/spandex, textiles etc. Such as bags，pillows，shirt, sportswear, aprons, hats. Can’t be used with waterproof coating, such as glass, ceramic, plastic..
  • √【GOOD THICKNESS】This grey heat transfer vinyl roll is made of PVC material with smooth and glossy surface. We call it K series. The characteristic of this film is that it is thicker than that of other companies, so when cutting, the pressure needs to be increased that will be easier to cut & weed. The size is 12 inch x 8 feet (30.5cmX2.44m).
  • √【ADHESIVE BACK】The grey iron on vinyl you got is two layers, a colored membrane and a protective sticky plastic membrane. The advantage of sticky back 1. You can stick back when you weed wrongly, the misaligned part can be glued back without wasting material.
  • Another feature is when pressing, the sticky transparent plastic film can be fixed on the clothes, which don’t move easily. So it is suitable for new learners, easy to weed & heat..
  • √【HOW TO USE GREY HTV VINYL】(1.Use computer to create your design 2. Feed the vinyl into cutting machine clear film down, be sure to cut the mirror side 3. Remove the exces....
Check Stock

guangyintong Heat Transfer Vinyl for T-Shirts 12" x 8ft - Grey HTV Vinyl Roll Iron on-Easy to Cut &Weed, Glossy Surface (Grey K11)

  • ...ntong is mainly used for athletic mesh fabrics, Cotton, polyester and cotton blend, Lycra/spandex, textiles etc. Such as bags，pillows，shirt, sportswear, aprons, hats. Can’t be used with waterproof coating, such as glass, ceramic, plastic..
  • √【GOOD THICKNESS】This grey heat transfer vinyl roll is made of PVC material with smooth and glossy surface. We call it K series. The characteristic of this film is that it is thicker than that of other companies, so when cutting, the pressure needs to be increased that will be easier to cut & weed. The size is 12 inch x 8 feet (30.5cmX2.44m).
  • √【ADHESIVE BACK】The grey iron on vinyl you got is two layers, a colored membrane and a protective sticky plastic membrane. The advantage of sticky back 1. You can stick back when you weed wrongly, the misaligned part can be glued back without wasting material.
  • Another feature is when pressing, the sticky transparent plastic film can be fixed on the clothes, which don’t move easily. So it is suitable for new learners, easy to weed & heat..
  • √【HOW TO USE GREY HTV VINYL】(1.Use computer to create your design 2. Feed th....
Check Stock

J-B Weld 8217 TankWeld Gas Tank Repair - 1 oz.,Dark Grey

  • J-B WELD TANKWELD: A hand mixable, steel reinforced two part epoxy putty stick that is formulated to repair and rebuild various holding tanks. J-B Weld TankWeld is chemical resistant against petroleum, hydraulic fluids and many other harsh chemicals once fully cured. TankWeld is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, it takes 5 minutes to set and cures in 1 hour. J-B Weld TankWeld set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld TankWeld has lap shear strength of 900 PSI. TankWeld can be molded, shaped, sanded, drilled and tapped..
  • MAJOR USES: Fuel tanks, metal radiators, metal fuel or chemical tanks, metal housings and stripped threads. Surface applications include: iron, stainless steel, copper, brass, aluminum, and bronze..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

guangyintong HTV Vinyl Rolls Heat Transfer Vinyl - 12\ x 20ft Grey HTV Vinyl for Shirts, Iron on Vinyl for All Cutter Machine - Easy to Cut & Weed for Heat Vinyl Design (Grey k11)

  • 【WIDELY USED】Now grey heat transfer vinyl are widely used in all walks of life in the world, and our HTV vinyl produced by guangyintong is mainly used for athletic mesh fabrics, Cotton, polyester and cotton blend, Lycra/spandex, textiles etc. Such as bags，pillows，shirt, sportswear, aprons, hats. Can’t be used with waterproof coating, such as glass, ceramic, plastic..
  • 【GOOD THICKNESS】This heat transfer vinyl roll is made of PVC material with smooth and glossy surface. We call it K series. The characteristic of this film is that it is thicker than that of other companies, so when cutting, the pressure needs to be increased that will be easier to cut & weed. The size is 12 inch x 20 feet (30.5cmX6.20m).
  • 【ADHESIVE BACK】The grey iron on vinyl you got is two layers, a colored membrane and a protective sticky plastic membrane. The advantage of sticky back 1. You can stick back when you weed wrongly, the misaligned part can be glued back without wasting material.
  • Another feature is when pressing, the sticky transparent plastic film can be fixed on the clothes, which don’t move easily. So it is suitable for new learners, easy to weed & heat..
  • 【HOW TO USE GREY HTV VINYL】(1.Use computer to create your design 2. Feed the vinyl into cuttin....
Check Stock

Siser EasyWeed Stretch Shiny HTV 15\x1yd Roll - Iron on Heat Transfer Vinyl (Silver)

  • COMPATIBLE WITH ALL CUTTING MACHINES: This product is perfect for all of your craft projects. Our vinyl heat transfer sheets are compatible with any and all plotting cutters such as Cricut Maker, Silhouette Cameo, Cricut Explore and many more! You will receive one 12x20" sheet in a grey camouflage pattern..
  • EASY WEEDING: Use our cricut iron on vinyl for all of your crafting needs! Once your design is cut into the HTV sheets, next comes the hard part. But our premium HTV makes it so easy to weed and remove pieces from your intricate designs. You don't have to use scissors or an xacto knife! Add white htv, black htv, and other colors to your htv heat transfer vinyl bundle..
  • LARGER SIZE: Our larger size of cricut htv vinyl means more bang for your buck! We give you an extra 8 inches compared to others on the market. We offer a variety of colors to create your own iron on vinyl bundle. More vinyl means it's perfect for any project you have in mind. Create custom t-shirts, sweatshirts and hoodies with our heat vinyl for cricut..
  • VINYL IRON ON FOR CLOTHES, BAGS, HATS: Add some pizzazz to any garment, tote bag, or hat with our colorful vinyl! It features great stretch so your designs move with your shirt. It is thin and smooth enough to be layered. The heat-ac....
Check Stock

J-B Weld Company 8265-S 3 Pack Original Steel Reinforced Epoxy Twin Pack, Dark Grey

  • J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water..
  • CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped..
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Wrights BDX230-008.45 Bondex Iron-On Patches 5\X7\ 2/Pkg-Light Grey

  • Bondex iron on patches are washable and dry cleanable.
  • Just follow the simple instructions, and your garment will be as good as new.
  • Read complete instructions and cautions before use.
Check Stock