Reviews Grease For Mower Spindles

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Fourtry Spindles Fit for Craftsman 42 inch Deck Mower - Deck Spindle Fit for Poulan HU Sears Craftsman LT1000 LT2000 LTX1000 Riding Mower with 36' 38' 42' Cutting Deck, Replace 130794, 137641, 2 Pack

  • Compatible with most popular 36" 38" 42" cut lawn mower models: ① Craftsman: LT1000, LT2000, LTX1000, DLT 3000, YT3000 tractor ② Poulan: PP11536, PP1036S, PP1136J, PP11536KA lawn tractor..
  • Also work with: ③HU: CT 130, CTH 130, CTH 150, LR 12, LR 120, LR 121, LR 122, LT 100, LT 120, LT 1238, LTH 130, LTH 1342, LTH 140, LTH 145, YTH 150, YTH 1542, YTH 160, YTH 180, YTH 1842, YTH 190, YTH 1942 riding mower, etc. More information please refer to product details below..
  • Greasable: These 3-bolt spindles are pre-greased for direct use and are greasable for maintenance. Note: Spindle has no zerk fitting..
  • Easy to install: Comes with 2 spindles, each spindle equiped with pulley lock nut, blade bolt, washer, spacer, 3 threaded mounting bolts (the mounting holes are also threaded) and 5 pointed star-shaped design blade mount..
  • Replaces OEM part: AYP/ Roper/ Sears: 128285, 130794, 133172, 137641, 137645, 532128285, 532130764, 532133172. 532137645. HU: 532130794, 532-130794..
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Time Traveler 0 Nuke Day 2.0

  • 【Application】The mulching mower blade kit is ideal for cutting tall grass, creating a vertical angle that maximizes airflow through the blade and provides vertical suction..
  • 【Compatible】The tractor blades are compatible with John Dee re ①102, 105, 115, 125, ②D100, D105, D110, D120, ③LA100, LA105, LA110, LA115, ④X105, X106, X110, X120, ⑤E100, E110, E120, E130, etc lawnmowers..
  • 【Replace OEM Part Numbers】GX22151, GY20850, AM137328, AM141033, AM137333, AM141031, UC21583. Please check the original part number and make sure this part fit your model before purchase..
  • 【Durable】The deck blades with 7-point star center holes are made of heavy-duty metal. Please make sure the spindles on your mower are 7-point star blade mounts..
  • 【Package Includes】Two pack lawn tractor blades with 21-3/8" in length, 2-3/4" in width, and 1/6" in thickness..
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • 2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
  • A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....
Check Stock

Finish Line Gear Floss Microfiber Cleaning Rope (Pack of 20 microfiber ropes)

  • The ultimate detailing tool! Perfect for cleaning your rear cassette, front chain rings, derailleur pulley wheels, hubs and spindles, brake arms, bottom bracket / crank interface, and more..
  • Gear Floss' Microfibers work by attracting, removing and holding grime. Other materials simply move it around. Microfiber captures dirt, grease and particles inside its star-shaped grooves and remove grime better than any other material..
  • Microfiber rope is highly tear-resistant and it is washable..
  • Easy to Use! Position floss between gears Slide back and forth Slide into other hard-to-clean areas like derailleur pulley wheels, hubs and spindles, brake arms, bottom brackets /crank interface, etc..
Check Stock