Reviews Gpu For I8700k

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
Check Stock

Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket Anodized Aerospace Aluminum Single Slot Cards Support，Safe Without Magnet（Black）

  • ★ LASTING PROTECTING GPU CARD: this GPU support bracket is specially designed to protect and support the graphics card/GPU cards, prevent the....
  • STURDY AND STABLE GPU BRACE SUPPORT: this GPU support bracket made of all aviation aluminum with oxidation treatment, far stronger and last longer....
  • ★ TOOL-FREE INSTALLATION: easy to mount and adjust the height,.Tool-less screws are used for fixing the support module. The support module is....
  • ★MAGNET-FREE DESIGN: There is No maget for the the whole product, which will not hurt your Disk,No impact on the electromagnetic environment of your....
  • ★SLIDING TRACK DESIGN: the GPU support bracket main part is the vertical aluminum cylinder, which works as a track, and it will allow the supporting....
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. This motherboard is adapted to the mining rig frame customized for B85/847 sold in our store..
  • Upgrade Material - Our mining GPU motherboard is made of high-quality steel, which is sturdy and durable, and can be reused. One large CPU cooling plate, super heat dissipation. You can install your own external cooling fan, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
  • Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the s....
Check Stock

Ausvrkkit Graphics Card GPU Support Bracket, Adjustable Height GPU Sag Bracket with Magnet and Non-Slip Sheet, GPU Brace for Prevent Universal VGA Graphics Card Sag, Black

  • 【Aluminum Alloy Metal】 -- The GPU support is made of aluminum alloy, anodized, durable, and not easy to rust, can providing the graphics card with lasting support for more than ten years..
  • 【Telescopic Screw Design】 -- The minimum size of the GPU bracket support is 2.75 inches, and the maximum size is 4.52 inches. The height can be adjusted flexibly to meet the needs of different chassis..
  • 【Magnetic Non-Slip Base】 -- The magnets in the base of the GPU stand can help to stand firm in the case. There are non-slip washers on both sides of the GPU holder, which will not damage the chassis..
  • 【Wide Application】 -- GPU brace, Compatible with ATX, M-ATX, ITX chassis structure, and universal VGA graphics card bracket. Meet various user hosts to avoid video card sagging..
  • 【Satisfaction Guarantee】 -- Our GPU holder provides high-quality after-sales service. If you are not satisfied with our graphics card holder, please feel free to let us know and we will help you right away. GPU stand exquisite packaging can be used as a holiday gift for graphics card lovers, family, and friends..
Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. (Please read the NOTE in the Product Description carefully before purchasing!)Two kinds of motherboards are shipped randomly..
  • Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
  • Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws ​​package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
  • Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk i....
Check Stock

inRobert DIY Two Ball Bearing Video Card Cooling Fan for Zotac GTX 1060 Mini

  • Must Read Before Order: Please carefully check the photo , and measure the size of your own GPU fan , and the mount hole pitch of your video card fan.....
  • Two Ball Bearing fan can work longer life and work quietly.
  • Suitable for Zotac GTX 1060 Mini 3GB GPU.
  • Please keep the screws from your own GPU , the fan not come with any screws.
Check Stock

CableMod Vertical PCI-e Bracket Black HDMI + DisplayPort

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX....
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset -....
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please....
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ...chine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and downloa....
Check Stock

ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card

  • 1380 MHz boost clock (OC Mode) for 7% performance improvement over reference.
  • Patented Wing-Blade for maximum airflow and longer fan lifespan.
  • ASUS Aura Sync RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products. Stream Processors - 2304.Engine Clock: 1360 MHz (Gaming Mode).
  • Industry-first MaxContact technology features an enhanced copper surface to allow for twice the GPU contact as traditional thermal solutions. Software : ASUS GPU Tweak II & Driver. Aura(Graphics Card) Utility.
  • Easily monitor and control your GPU's performance and cooling with the intuitive GPU Tweak II interface and Fan Connect II for GPU and CPU temperature sensing.
  • Auto-Extreme manufacturing technology delivers premium quality and reliability with aerospace-grade Super Alloy Power II components. OpenGL 4.5.
Check Stock

LINKUP - 30cm PSU PC Power Extension Cable Metallic Sleeved Silicone Coated Soft & Flexible to Route Custom Mod GPU & CPU w/Comb Kit┃1x 24P (20+4)┃2X 8P (4+4) CPU┃2X 8P (6+2) GPU┃300mm - Silver

  • 【Get Wired】High-quality, super soft, and routable modular 18AWG multi-color PSU cable extensions with durable silicone jacket cables for refined professional builds.
  • 【2 x CPU & 2 x GPU】2 x 4+4-Pin CPU power cables and 2 x 6+2-Pin GPU power cables bundled in one package. Suitable for new CPU & GPU. Also includes 24-Pin motherboard power cable.
  • 【Vivid】Mod your build with 3 unique color options in 30cm and 50cm.
  • 【Robust and Adaptable】All cables are manufactured with thick 18AWG UL 1015 Tinned Copper wires and come in a high-density flexible metallic sleeve allowing for an adaptable temperament. Comes with several cable combs to cleanly route and organize.
  • 【LINKUP Cares!】Backed by a LINKUP Limited 1-Year Warranty and complimentary premium online support. **NOTE: These cables do not arrive pre-curved. The photos listed are a representation of how the cables can be trained. With the braided design, these cables can be easily curved, as demonstrated in the listing photo.
  • 【Stiff Single 8-Pin GPU: B088P8QKRB】 【Stiff Single 8-Pin (4+4) CPU: B085YFQW6M】 【Stiff Single 4-Pin CPU: B08CFTSQ34】 【Stiff 2GPU+1CPU Set: B07JBN1RY6】 【Stiff 2GPU+2CPU Set: B07T8C98ZQ】 【Stiff 3GPU+2CPU Set: B088P7CNT5】 【Soft Cable Version: B08....
Check Stock